All Products

SKU: AF-5362

The 64×64 RGB LED Matrix Panel with 2mm pitch packs 4096 bright RGB LEDs into the most pixel-dense panel in the 64×64 range. With the tightest spacing available, this panel produces exceptionally sharp, detailed images for very close-up indoor viewing. This panel uses a non-standard 5-address (A...

SKU: AF-5407

The 64×64 RGB LED Matrix Panel with 45° Curb-Cut corners and 2.5mm pitch features 4096 bright RGB LEDs in an ultra-high-density panel. The curb-cut corners are angled at 45°, allowing multiple panels to be assembled into LED video cubes or rectangular enclosures with seamless edges. This panel u...

SKU: PL-1155

A compact enclosed battery holder for six AA batteries, providing approximately 9V (alkaline) or 7.2V (NiMH rechargeable) from a series configuration. Features bare wire leads for flexible integration into your project. Key Features 6-Cell Capacity – Holds six AA batteries in series Enclosed ...

SKU: TB-HM3194

A 12-way screw terminal strip rated at 6A and 250VAC. Can be divided into smaller sections with a sharp knife, making it easy to create custom-sized terminal blocks for any project. Each terminal block includes a mounting hole on a fixed pitch. Key Features 12-Way Configuration – Divisible int...

SKU: LB-LS000A

A pack of 30 tactile pushbutton switches in six vibrant colours — blue, white, yellow, green, black, and red. Each 12mm switch comes with a snap-on square cap, making it easy to create colour-coded controls for your projects. The switches are normally open and momentarily close the circuit when ...

SKU: DF-SEN0142

A compact breakout board for the MPU-6050, combining a 3-axis gyroscope and 3-axis accelerometer with an onboard Digital Motion Processor (DMP) on a single chip. The integrated DMP handles complex motion fusion algorithms, offloading processing from your microcontroller. The breakout includes a ...

SKU: DF-FIT0781

A versatile USB-to-serial converter module supporting six conversion modes: USB-TTL, USB-232, USB-485, TTL-232, TTL-485, and 232-485. Switch between modes using onboard DIP switches — no need for multiple adapters. Built around the CP2102 chip with 3.3V/5V compatibility. Includes 500mA fuse prot...

SKU: DF-SER0051

The 6 kg 180° Clutch Servo from DFRobot features a built-in clutch mechanism and electronic protection, making it ideal for robotics and mechanical projects where the servo may encounter external forces or stalling conditions. When the servo's angle is changed by external forces during operation...

SKU: DF-FIT0829

The 6mm Industrial Wide Angle Lens is a 3-megapixel CS-mount lens with a 63° field of view, designed for use with the Raspberry Pi High-Quality Camera and Jetson Nano 12.3MP camera. Its wide angle and adjustable focus ring make it well suited for CCTV, wildlife monitoring, security cameras, and d...

SKU: TB-PT4932

Non-insulated eye terminals for electrical and automotive applications. These tin-plated copper terminals accept 4mm² (12–14 AWG) wire and feature a 6mm eye for bolt connections. Hex crimp fitting for secure cable attachment. Rated at 30A. Specifications Terminal Type: Eye (ring) Eye Size: 6m...

SKU: AF-4184

The 6mm Rainbow Tactile Button Deluxe Party Tray is a 160-piece assortment of colour-coded momentary tactile switches, each pre-assembled with a round coloured cap. The buttons come in a handy round plastic carry case with dividers separating the 8 colours. These are standard 6mm tactile push bu...

SKU: DF-FIT0430

The 6mm Spiral Cable Wrap is a 1-metre length of flexible spiral tubing for bundling and organising cables. It provides electrical insulation and protects wires from abrasion, keeping cable runs neat and tidy. Specifications Length: 1 metre Diameter: 6mm Ideal For Cable management and orga...

SKU: TB-SP0603

A normally open SPST micro tactile switch in a compact 6×6mm package. This single-action momentary push button is designed for PCB mounting and is suitable for a wide range of electronics projects and prototyping applications. Specifications Switch Type: Tactile push button Configuration: SPS...

SKU: LB-LR0380

A set of six precision ESD-safe tweezers for electronics work. Each tweezer has a different tip profile for various tasks, from fine-pitch SMD component placement to general handling. The antistatic coating protects sensitive components from electrostatic discharge. Key Features ESD-Safe Coati...

SKU: SF-PRT-11475

A robust 6-pin GX16 aviation-style connector set including both the panel-mount jack and mating plug. The threaded locking ring screws onto the panel connector, creating a secure connection that won't pull apart — ideal for signal or power wiring in enclosures. Key Features Locking Connection ...

SKU: DF-FIT0106

A pack of ten 6-pin female headers with standard 0.1″ (2.54mm) pin spacing. Commonly used for Arduino shield connections and general prototyping. Key Features Standard 0.1″ Pitch – Compatible with breadboards, Arduino, and most development boards 6-Pin Configuration – Matches common Arduino a...

SKU: AF-371

A 150mm (6″) IDC ribbon cable with 6-pin (2×3) socket connectors on both ends at 0.1″ × 0.1″ (2.54mm) spacing. Commonly used for AVR ISP programming connections and other 2×3 header interfaces. Key Features Socket-to-Socket – 2×3 IDC connectors on both ends Standard 0.1″ Pitch – Compatible wi...

SKU: DF-DFR0866

The 6V 2-Position 3-Way Air Valve is a solenoid-driven pneumatic valve for controlling air flow direction in pneumatic systems. Like a relay, it features three interfaces: a common port (COM), a normally open port (NO), and a normally closed port (NC). Powering the valve on or off determines whic...

SKU: AF-4663

The 6V Air Valve (FA0520E) is a 3-port solenoid valve for pneumatic systems, functioning similarly to an electrical relay. It features a common port (COM), a normally open port, and a normally closed port, allowing you to switch air flow direction by powering the valve on or off. The valve is ra...

SKU: DF-FIT0806

The 6V Electric Push Rod with 100mm stroke from DFRobot is a compact linear actuator delivering up to 128N of thrust. Despite its small size, it provides strong pushing force for access control, DIY lifting projects, electric telescopic poles, and other linear motion applications. With simple tw...