All Products

SKU: DF-FIT0803

The 6V Electric Push Rod with 10mm stroke from DFRobot is a compact linear actuator delivering up to 128N of thrust. Despite its small size, it provides strong pushing force for access control, DIY lifting projects, electric telescopic poles, and other linear motion applications. With simple two...

SKU: DF-FIT0804

The 6V Electric Push Rod with 30mm stroke from DFRobot is a compact linear actuator delivering up to 128N of thrust. Despite its small size, it provides strong pushing force for access control, DIY lifting projects, electric telescopic poles, and other linear motion applications. With simple two...

SKU: DF-FIT0805

The 6V Electric Push Rod with 50mm stroke from DFRobot is a compact linear actuator delivering up to 128N of thrust. Despite its small size, it provides strong pushing force for access control, DIY lifting projects, electric telescopic poles, and other linear motion applications. With simple two...

SKU: WS-24166 · MPN: 24166

The 6W Monocrystalline Solar Panel from Waveshare delivers 5.5V output through high-efficiency monocrystalline silicon cells, encased in toughened glass for durability and weather resistance. It features both Micro USB and USB Type-C output interfaces (via adapter) with a 3-metre cable for easy c...

SKU: PL-1239

A 300mm (12") six-conductor female-to-female cable designed for chaining ShiftBrite and ShiftBar LED modules. The cable wires are colour-coded to match the ShiftBrite pinout, with black for ground and red for power. Specifications Length: 300mm (12") Conductors: 6 Wire Gauge: 26 AWG stranded...

SKU: DF-FIT0266

A 6×AA battery holder with bare wire leads for creating 7.2V rechargeable battery packs (NiMH/NiCd) or 9V packs from alkaline cells. The holder features side-by-side cell placement and comes with 150mm red and black wires for easy connection. Specifications Cell Quantity: 6× AA Output Voltage...

SKU: DF-FIT0078

A double-layer 6×AA battery holder with a stacked 3+3 cell arrangement for a more compact footprint. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells. Comes with 150mm (6") red and black wire leads. Specifications Cell Quantity: 6× AA (double layer...

SKU: AF-248

A 6×AA battery holder with a 5.5mm/2.1mm DC barrel plug, ready to power Arduino boards and other electronics with a standard DC jack. Use alkaline AAs for approximately 9V at 3000–4000mAh, or rechargeable NiMH cells for 7.2V at ~2000mAh. The 9V alkaline output is ideal for boards with a 5V volta...

SKU: DF-FIT0141

A 6×AA battery holder with a DC 2.1mm power jack that plugs directly into an Arduino's barrel jack input. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells. Features mounting holes for secure installation. Specifications Cell Quantity: 6× AA Output...

SKU: LB-LR0294

A simple 6-cell AA battery holder with a 125mm (5") cable terminated with a standard 5.5×2.1mm centre-positive barrel jack connector. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells, ready to plug directly into devices with a standard DC barrel jack ...

SKU: AF-2353

This 7.0" TFT display packs 800×480 pixels with an LED backlight and 24-bit colour capability via its 40-pin connector (8 red, 8 green, 8 blue parallel pins). It's ideal for projects requiring a large display area for graphics, menus, or data visualisation. This is a raw pixel-dot-clock display ...

SKU: AF-2354

This 7.0" TFT display packs 800×480 pixels with an LED backlight and a 4-wire resistive touchscreen overlay. With 24-bit colour capability via its 40-pin connector (8 red, 8 green, 8 blue parallel pins), it's ideal for projects requiring a large, interactive display area. This is a raw pixel-dot...

SKU: DF-FIT0477

This 7" IPS display is designed specifically for the LattePanda single board computer. Simply connect it via the MIPI FPC connector and power your LattePanda — no extra power cables required. The display border is insulated with black tape to prevent short circuits, making it safe to use even wit...

SKU: DF-FIT0950

This 7" IPS touch display connects to the LattePanda Mu and LattePanda Sigma via eDP (Embedded DisplayPort) interface, delivering excellent visual quality with 1024×600 resolution and full viewing angle support. The multi-touch panel features 6H surface hardness for scratch resistance and a fully...

SKU: DF-FIT0145

A waterproof DC-DC step-down/step-up converter that accepts 8–40V DC input and delivers a stable 12V output at up to 6A (72W). Ideal for powering embedded PCs, single-board computers, and robot electronics from a wide range of battery or power sources. Key Features Wide Input Range – 8–40V DC ...

SKU: WS-24709

The Waveshare PhotoPainter is a 7.3" e-paper display housed in an elegant solid wood frame. Using Advanced Color ePaper (ACeP) technology, it supports 7-colour display with a paper-like viewing experience — no blue light, no eye strain, and images persist without power. With ultra-low power cons...

SKU: WS-24708

The Waveshare PhotoPainter is a 7.3" e-paper display housed in an elegant solid wood frame. Using Advanced Color ePaper (ACeP) technology, it supports 7-colour display with a paper-like viewing experience — no blue light, no eye strain, and images persist without power. With ultra-low power cons...

SKU: WS-30315 · MPN: 30315

The Waveshare PhotoPainter (B) is a 7.3" full-colour e-paper display housed in an elegant solid wood frame. Using E Ink Spectra 6 (E6) technology with six primary colours and advanced dithering, it renders photos and digital content with vivid colour saturation and high contrast — all without the...

SKU: AF-1787

A quad level-shifting buffer IC that excels at converting 3V logic signals up to 5V. Power the 74AHCT125 with 5V and it will cleanly detect 3.3V logic inputs — particularly useful when connecting devices like Teensy 3.x to NeoPixels or other 5V peripherals. To use, apply 5V to VCC, connect GND, ...

SKU: AF-3877

A hex Schmitt-trigger inverter IC that doubles as a handy logic level shifter. The 74AHCT14 provides six independent inverter channels, each with Schmitt-trigger inputs for clean switching on noisy or slow-transitioning signals. Spec'd for 5V operation but works at 3V as well. High-level inputs ...