All Products
AI Overview
Here are solid GPS options depending on what you’re building:
Easy GPS modules (great starting point)
- Ultimate GPS Module - 66 channel w/10 Hz updates [MTK3339 chipset] (66-channel, up to 10 Hz updates) — $51.75
- GPS Module with Enclosure (rugged/enclosed receiver for general projects) — $28.90
- USB/TTL Raspberry Pi GPS Tracker (USB/TTL GPS for Raspberry Pi setups) — $59.35
Raspberry Pi add-on (HAT)
- Adafruit Ultimate GPS HAT for Raspberry Pi [Mini Kit] (GPS/GLONASS for Pi with built-in RTC) — $64.45
GPS + cellular tracking
- Adafruit FONA 808 - Mini Cellular GSM + GPS Breakout (integrated 2G GSM + GPS for tracking/telemetry) — $100.35
Antennas (if your module needs one or you want better reception)
- Antenna GPS Embedded SMA (GPS antenna with built-in LNA, SMA) — $40.40
- Passive GPS Antenna uFL - 15mm x 15mm 1 dBi gain (uFL, compact 15×15mm) — $8.55
- Passive GPS Antenna uFL - 9mm x 9mm -2dBi gain (uFL, ultra-compact 9×9mm) — $10.35
PCB-mount GPS antennas (for custom embedded designs)
- Molex Ceramic Chip GPS PCB Mount Antenna (PCB-mount ceramic antenna) — $1.45
- Molex Cube PCB Mount GPS Antenna (PCB-mount cube antenna) — $5.60
- Molex Molded PCB Mount Helix GPS Antenna (tiny PCB-mount helix, 3×5×4mm) — $3.85
- TE Puck PCB Mount GPS Antenna (PCB-mount puck, 16mm diameter) — $4.95
What kind of GPS product are you looking for?
Collections
Showing 61-80 of 91 products · 9 unavailable products hidden
LG290P Quadband GNSS RTK Breakout (Qwiic)
·
Built around the Quectel LG290P, this compact RTK GNSS breakout is designed for high-precision positioning projects that need quad-band, multi-constellation reception. It follows the same board dimensions, pin layout and connectors as SparkFun’s GPS-RTK-SMA Breakout - ZED-F9P (Qwiic), making it a...
NEO-F9P GNSS-RTK L1/L5 Breakout with Qwiic
·
Bring high-precision GNSS positioning to your project with the u-blox NEO-F9P engine and dual-band L1/L5 reception. L5 signals sit in the protected ARNS band, helping reduce RF interference and improve reliability in challenging environments such as dense city streets.The breakout provides five s...
RTK Postcard GNSS RTK Development Board
·
This compact high-precision positioning board combines a Quectel LG290P GNSS RTK receiver with an Espressif ESP32-PICO-MINI-02 MCU module. It runs SparkFun’s RTK Everywhere firmware, letting it operate as a base station or rover for precision navigation projects.The ESP32 adds WiFi, Bluetooth® an...
Allband GNSS RTK Breakout - mosaic-G5 P3
·
Built around Septentrio’s mosaic-G5 P3, this compact GNSS RTK breakout is designed for projects that need survey-grade positioning without giving up space or power budget. It offers the same leading performance as the mosaic-X5 in a package that is 60% smaller and consumes 40% less power.The rece...
GNSS Flex pHAT with mosaic-G5 P3
·
Add survey-grade GNSS positioning to a Raspberry Pi while keeping size, weight and power demands low. This kit combines the GNSS Flex pHAT with the SparkPNT mosaic-G5 P3 module, built around Septentrio’s compact mosaic-G5 receiver.The pHAT connects to a Raspberry Pi through the standard 40-pin GP...
GNSS Flex pHAT with mosaic-X5 RTK & IM19 IMU
·
Add survey-grade positioning to a Raspberry Pi with this GNSS Flex pHAT bundle, combining a Flex pHAT carrier, Septentrio mosaic-X5 RTK GNSS receiver and Feyman IM19 IMU. It is designed for high-precision positioning, tilt-aware surveying, industrial robotics and autonomous navigation projects.Th...
GNSS Flex pHAT with u-blox ZED-X20P
·
Bring high-precision GNSS to a Raspberry Pi with this GNSS Flex pHAT and u-blox ZED-X20P receiver module. It is built for centimetre-level positioning in demanding navigation and control projects such as UAVs, guidance systems, auto-steering and high-speed robotics.The pHAT connects to a Raspberr...
GNSS Flex pHAT with DAN-F10N Dual-Band GNSS Module
·
Add dual-band GNSS positioning to a Raspberry Pi or similar single-board computer with this SparkPNT GNSS Flex pHAT and DAN-F10N module combination. It pairs a GNSS Flex pHAT carrier with a u-blox DAN-F10N GNSS Flex Module for metre-level L1/L5 positioning in a compact, swappable format.The pHAT ...
u-blox ZED-X20P Allband GNSS RTK Breakout (Qwiic)
·
This GNSS RTK breakout brings the u-blox X20 engine to a maker-friendly board for high-precision positioning projects. It is designed around the ZED-X20P all-band receiver and can process signals from GPS, Galileo, BeiDou, QZSS and NavIC across all GNSS frequency bands, including L-band.The board...
GNSS-RTK Positioning Kit with LoRa 868MHz (EU)
·
This GNSS-RTK kit is a complete base-and-rover positioning setup for projects that need centimetre-level location data. It uses Real-Time Kinematic correction, with a stationary base station sending RTCM correction data over an integrated LoRa 868MHz link to the mobile RTK unit.The system is buil...
GNSS-RTK Positioning Kit with LoRa (915MHz)
·
This dual-module GNSS-RTK kit brings a base station and mobile rover together for high-precision positioning projects. It uses Real-Time Kinematics, where the stationary base station sends correction data to the moving rover to reduce common GNSS errors and deliver centimetre-level positioning.Th...
4G GNSS-RTK Positioning Kit (EMEA & Thailand)
·
Designed for high-accuracy navigation projects, this kit uses Network RTK to deliver 5 cm + 1 ppm centimetre-level positioning across a typical 15-20km operational range. Its onboard 4G module receives RTCM correction data from a CORS network via the Ntrip protocol, removing the need for a local ...
MicroMod GNSS RTK Carrier Board - ZED-F9P
·
Built around the u-blox ZED-F9P, this MicroMod carrier gives your project high-precision GNSS and RTK positioning in a swappable, solderless MicroMod format. It supports rover and base station operation, with RTK accuracy down to millimetre-level positioning when used with suitable correction dat...
GPS-RTK Board - NEO-M8P-2 (Qwiic)
·
Built around the u-blox NEO-M8P-2, this breakout brings high-accuracy GNSS and GPS positioning with RTK support to the Qwiic ecosystem. It’s designed for applications where standard GPS accuracy isn’t enough, with RTK positioning down to 25mm so you can track the location of a device, robot or ve...
Taoglas Steedan MA350 5-in-1 Magnetic Mount Antenna
·
The Taoglas Steedan MA350 is a low-profile 5-in-1 combination antenna designed for vehicle roofs, outdoor buildings and heavy equipment where drilling through a roof or metal panel is not feasible. Its magnetic base mounts to steel surfaces using ultra-strong neodymium magnets, while a soft foam ...
GNSS Flex Module - mosaic-G5 P3 & IM19 IMU
·
This swappable GNSS Flex board pairs a Septentrio mosaic-G5 P3 GNSS receiver with a Feyman IM19 IMU for high-precision positioning, attitude measurement and dead reckoning in compact systems. It is suited to autonomous platforms, robotics and portable surveying tools where size, weight and power ...
SparkPNT GNSS Flex Module - mosaic-X5 & IM19 IMU
·
This GNSS Flex module combines a Septentrio mosaic-X5 multi-band RTK receiver with a Feyman IM19 IMU for high-precision positioning, tilt compensation and dead reckoning. It is aimed at professional surveying, industrial robotics and autonomous navigation applications where reliable position and ...
SparkPNT GNSS Flex Module - ZED-X20P & IM19 IMU
·
This GNSS Flex board combines a u-blox ZED-X20P all-band RTK GNSS receiver with a Feyman IM19 IMU, giving compatible carrier boards centimetre-level positioning plus compensated attitude data for demanding navigation and surveying projects.It is designed for the SparkPNT GNSS Flex ecosystem, with...
SparkPNT GNSS Flex Module - LG290P & IM19 IMU
·
This SparkPNT Flex board combines Quectel's LG290P quad-band RTK GNSS receiver with the Feyman (FMI) IM19 IMU, providing centimetre-level positioning with tilt compensation and anti-jamming performance for demanding navigation and surveying projects.It is part of the SparkPNT GNSS Flex system, de...
Timing GNSS Breakout - mosaic-T
·
Built around the Septentrio mosaic-T module, this breakout is made for demanding timing applications such as high-accuracy time stamping, frequency synchronisation and GPS-disciplined oscillators (GPSDO).The mosaic-T is a multi-band, multi-constellation GNSS receiver with Septentrio AIM+ technolo...
