All Products
AI Overview
Servo options depend mainly on whether you need position control (typically ~180°/270°/300°) or continuous rotation (360° wheel-style motion), plus the torque you need.
Micro servos (small robots, pan/tilt, light mechanisms)
- Budget ~180°: 9g micro servo (1.6kg) (1.6 kg·cm) $7.07
- More durable gears: 9g Metal Gear Micro Servo (1.8Kg ) (metal gears, 1.8 kg·cm) $10.01
- Ultra-small continuous rotation: 2.5g 360 degree Micro Servo (0.45kg) (360°, 0.45 kg·cm) $14.05
- High-torque micro option: Micro Servo - MG90S High Torque Metal Gear (metal gear, compact) $20.98
Standard/high-torque servos (arms, heavier linkages)
- Standard size ~180°: DSS-P05 Standard Servo (5kg) (~5 kg-class) $19.40
- Heavy duty: DF Metal Geared 15Kg Standard Servo 180° (DSS-M15) (15 kg·cm, 180°) $24.68
- Wider travel: DF Metal Geared 15Kg Standard Servo 270° (DSS-M15S) (15 kg·cm, 270°) $25.66
- “Slip/clutch” protection for mechanisms that can be forced: DFRobot SER0057 6kg 300° Clutch Servo (300°, clutch) $21.48
- MG996R-style metal gear: Metal Gear Servo 180 Degrees (MG996R, ~10 kg class) $15.27
Continuous rotation servos (drive wheels, winches, rotation instead of positioning)
- Micro continuous: Micro Servo 9g - Continuous (360° continuous) $7.95
- Micro continuous (FS90R): Continuous Rotation Micro Servo [FS90R] (360° continuous) $14.63
- Standard-size continuous rotation: Servo - Generic High Torque Continuous Rotation (Standard Size) (high torque, continuous) $41.97
- Continuous rotation + feedback sensing: Feedback 360 Degree - High Speed Continuous Rotation Servo (360° + position feedback) $65.97
Servo driver / control boards (run many servos cleanly)
- PCA9685 16-channel I2C driver (great for Arduino/Pi): Adafruit 16-Channel 12-bit PWM/Servo Driver - I2C interface [PCA9685] (16-ch, 12-bit, I2C) $31.47
- Raspberry Pi form-factor: Adafruit 16-Channel PWM / Servo Bonnet for Raspberry Pi (16-ch, PCA9685) $26.83 and Adafruit 16-Channel PWM / Servo HAT for Raspberry Pi - Mini Kit $34.14
- Raspberry Pi Pico: Servo Driver Module for Raspberry Pi Pico, 16-ch Outputs, 16-bit Resolution (16-ch, 16-bit) $16.84
- No-program trigger control: SparkFun Servo Trigger $43.09 or SparkFun Servo Trigger - Continuous Rotation $34.37
Pan/tilt brackets & kits (camera/sensor mounts)
- With servos included: Mini Pan-Tilt Kit - Assembled with Micro Servos $40.36
- Bracket only: Unassembled Mini Pan-Tilt Kit (Without Micro Servos) $9.65 or FPV Nylon Pan Tilt Kit (Without Servo) $5.85
- Raspberry Pi pan/tilt control: Pan-Tilt HAT - Full kit $66.90 or Pan-Tilt HAT - without Pan-Tilt module $29.84
Useful accessories (mounting, horns, extensions)
- Horns: Micro Servo Arm and Horn Set $2.43, Standard Servo Arm and Horn Set - 25 Spline $4.87, Metal Servo Horn $5.36, Plastic Servo Horn $3.24
- Brackets: Aluminum Multi-Purpose Servo Bracket $9.31, Mounting Bracket for Standard-Size Servos $6.73, Metal Servo Bracket $3.55
- Extensions/Y-cables: Servo extension cable 150mm $0.92, Servo extension cable 300mm $1.09, Servo extension cable 600mm (23.62) $1.58, Servo Y extension cable (300mm) $1.66
Collections
Showing 21-40 of 51 products · 9 unavailable products hidden
REV Robotics Smart Robot Servo
·
This configurable metal-geared servo can be used as a standard angular servo, a custom-limit angular servo, or a continuous-rotation actuator. It accepts conventional PWM input, so it can drop into many robotics builds while adding useful reconfiguration options when used with the optional REV SR...
Gimbal Motor with Encoder - 12V, 467RPM - SparkFun Electronics
·
A compact brushless gimbal motor with an integrated AS5048A magnetic encoder for high-resolution position feedback. The 11-pole-pair design delivers smooth, precise rotation at up to 467 RPM nominal speed, making it well suited for camera gimbals, robotics, and precision motion control. Specific...
Smart Arduino Digital Servo Shield for Dynamixel AX
Some day,a guy want to make a robotic dog as a gift to his little son.He brought some digital servos, a microcontroller,Lipo batterys...Then he found it hard to drive these smart servos with Arduino processor! So we developed a driver board that can easily & quickly drive the digital servo...
Goteck micro metal gear servo (2.5kg)
This is a metal gear servo(2.5kg) from Goteck.It's very small, lightweight, and powerful! Metal gear for longer wear life and extra strength in demanding applications. Perfect for use in medium-sized electric airplanes,helicopters or mini Robots. SPECIFICATIONS Operating voltage...
EF92A micro:servo 180 degrees analog servo for micro:bit
EF92A is a kind of 180 deg analog servo. It is light and portable, a little bigger than 5 cent coin. It works at 3V voltage and can be used to make small robot modules, mechanical arm modules and intelligent car modules.ParametersProduct SKU: EF09082Operating Voltage: 3.0V-5.5VOutput Torque: 1.6K...
Servo - Hitec HS-422 (Standard Size)
This is the classic Hitec HS-422 servo. This solid consumer grade servo is able to take in 6 volts and deliver 57 oz-in. of maximum torque at 0.16 sec/60°, this is a simple servo for any beginner project!This high quality servo is perfect for your mechatronic needs and if you are looking to get i...
EF90D micro:servo 360 degrees digital servo for micro:bit
EF90D is a kind of 360 deg analog servo. It is light and portable, a little bigger than 5 cent coin. It works at 3V voltage and uses pulse width to adjust speed of the servo rotation, which also can be used to make small robot modules, mechanical arm modules and intelligent car modules. Parame...
Micro Servo with Alligator Clips
This servo is just like our classic Micro Servo but has 3 alligator clip test leads at the end! This makes it perfect for plug-and-play support with any of our boards with alligator-clip-friendly input/output pins, like the Circuit Playground Express, Clue, and micro:bit! So you can just 'gator r...
Micro Servo 9g
This compact 9 g micro servo is an affordable, simple actuator for small mechatronics projects, robot linkages and model mechanisms. It can operate from 3.0 V to 7.2 V, with the supplied feature ratings listed at 6.0 V where noted.A 3-wire cable provides ground, power and control, terminated in a...
Vertical Micro Servo Mount for LEGO-Compatible Brick Systems
·
Add motion to LEGO-compatible brick builds without relying on hot glue, epoxy or guesswork. This resin-printed mounting piece is designed to hold Adafruit '9g' micro servos and micro-servo-sized DC motors securely for robotics and mechanical projects.The mount has a vertical servo orientation wit...
Machined Red Aluminium Servo Arm - 1.75in Long
·
This machined aluminium servo arm is a tougher, longer-lasting upgrade from the standard plastic servo horns commonly supplied with hobby servos. The red anodised finish looks neat in robotics, animatronics and mechanical builds while adding strength where plastic horns can flex or wear.The arm i...
Metal Flat Key Shaft Flange Plate, Suitable For Using with Serial Bus Servo
Metal Flat Key Shaft Flange Plate, Suitable For Using with Serial Bus Servo, Compatible With Various Transmission Parts Metal Flat Key Shaft Flange Plate Using with serial bus servo for driving various transmission parts Dimensions ...
Analog Feedback Standard-Size Servo
·
This standard-size hobby servo adds a handy fourth white wire that brings out the internal potentiometer wiper. Connect it to an analogue input on a board such as an Arduino to read the servo’s position as a voltage while still driving the servo as normal.That feedback signal can be useful in rob...
Horizontal Micro Servo Mount for LEGO-Compatible Bricks
·
Add motion to a LEGO-compatible brick build without reaching for hot glue, epoxy or crossed fingers. This resin-printed mounting piece is designed to hold an Adafruit '9g' micro servo or a micro-servo-sized DC motor securely in a horizontal orientation.The mount has LEGO-compatible dots on the bo...
Servo Y extension cable (500mm)
This 500 mm Y-cable is typically used to connect two servos to a single servo port on an RC receiver or servo controller. It has a single female JR connector connected to two male JR connectors, which means it is compatible with almost all of the RC servos.The connectors have gold-flashed cont...
3 Pin JST to Female Connector x 10
A pack of ten 30 cm adapter cables, each with a 3-pin JST connector on one end and a standard female servo connector on the other. Ideal for connecting servos to receivers, controllers, or any device that uses a JST-style port instead of a standard servo header. Key Features JST to Female Serv...
Smart Car Mounting Bracket For Ultrasonic Ranging Module Analog Servo
A mounting bracket designed to attach an HC-SR04 ultrasonic ranging module and an analogue servo to a smart car chassis. Enables pan-and-scan obstacle detection for robotics projects. Key Features HC-SR04 Compatible – Mounts the popular ultrasonic ranging module Servo Mount – Attaches to a st...
Standard Size - High Torque - Metal Gear Servo
This high-torque standard servo now comes in a metal-gear flavor, for extra-high torque (10 kg*cm!) and reliability! It can rotate at least 120 degrees (60 in each direction) with a classic 1.5-2.5ms pulse, but if you can extend your pulses it can go up to about 170 degrees - it varies a bit serv...
Servo to Alligator Clip Cable - Shrouded
This is a servo adapter cable that allows you to hookup your servo directly to alligator clip connections. On one end you have a shrouded male servo connector, and on the other end three 30mm shrouded alligator clips. Alligator clips are a staple item for any workbench or maker space, and with th...
DF15RMG Tilt Kit (20kg)
This is a most powerful standard servo motor from DFRobot so far. A servomotor is a rotary actuator that allows precise control of angular position. This is specifically designed for the robotics application which requires high quality in a variety of the servo features. The DF15RMG stan...
