DFRobot
Servo extension cable 150mm
A 150mm servo extension cable for reaching servos mounted further from the controller than the servo's built-in lead allows. Male connector plugs into the co...
Get notified when back in stock
A 150mm servo extension cable for reaching servos mounted further from the controller than the servo's built-in lead allows. Male connector plugs into the controller, female connector mates with the servo. Also works as a standard 0.1" jumper cable for general prototyping.
Specifications
- Length – 150mm (5.91")
- Wire Colours – Red = Power, Black = GND, White = Signal
- Compatible With – Hitec, Futaba, JR, Multiplex, and Airtronics Z servos
Package Contents
- 1× Servo extension cable (150mm)
Jargon buster
Plain-language definitions for the technical terms used above.
- GND
- GND is the ground or reference connection (0 V) for a circuit. When connecting two devices together, their grounds must be joined so both agree on what counts as a low or high signal.
- servo
- A servo is a motor with built-in position control, usually told to move to a specific angle by a control signal. It matters when you need repeatable movement, such as steering, arms, flaps, or linkages, rather than continuous spinning.
Find this product in
Prototyping & Wiring
Supplier page — dfrobot.com
Supplier Description · 166.4 KB · Click any page to view full size
Related Tutorials
Free guides on learn.littlebird.com.au
