All Products
Showing 1-20 of 60 products
DFRobot Gravity LED Switch Module - Green
·
This compact illuminated push-button module combines a tactile switch with a built-in green LED indicator, making it handy for interactive electronics, control panels and classroom builds.It uses a self-locking toggle action rather than a momentary press. Press the button once and the output goes...
DFRobot Gravity LED Button for Arduino and micro:bit - White
·
This Gravity LED button is a simple illuminated push button with a transparent cap, designed for interactive Arduino and micro:bit projects. When the button is pressed, the internal white LED turns on to provide clear visual feedback.The module behaves like a basic digital switch: when pressed do...
Gravity LED Switch Module - White
·
This compact illuminated push-button module combines a tactile switch with a built-in white LED indicator, making it handy for interactive electronics, prototypes and embedded control panels.The switch outputs a digital HIGH/LOW signal and runs from +3.3-5V, so it suits common development boards ...
DFRobot Gravity LED Self-Locking Switch - Yellow
·
This illuminated latching push button combines a tactile switch with a built-in yellow indicator LED, making it easy to add clear on/off control to interactive electronics and educational prototypes.When the button is pressed down, the module self-locks, outputs High and lights the LED. Pressing ...
Gravity LED Button Module for Arduino/micro:bit - Green
·
This compact illuminated push-button module adds a simple, visible input to interactive electronics, classroom prototypes and maker projects. A transparent cap shows the integrated LED, which lights as soon as the button is pressed for clear visual feedback.It uses the Gravity PH2.0-3P connector ...
Gravity LED Button for Arduino and micro:bit - Red
·
This compact illuminated push-button module is designed for interactive electronics and quick prototyping. A transparent cap sits over an internal red LED, giving instant visual feedback when the button is pressed.The module provides a simple digital output for microcontroller input detection: wh...
Gravity LED Self-Locking Switch - Red
·
This illuminated pushbutton module is a simple self-locking switch with a built-in red LED for clear visual feedback. Press it once and the module outputs High while the LED turns on; press it again and the output goes Low while the LED turns off.It is designed for easy use in Arduino, micro:bit ...
Gravity LED Button for Arduino/micro:bit - Yellow
·
This LED-illuminated button module is a simple digital switch with a transparent cap and a yellow light. It works like a basic button, but the internal LED turns on while the button is pressed, giving clear visual feedback for interactive projects.When pressed down, the module outputs High and th...
Gravity: Digital Wireless Switch Kit - Transmit and Receive (433MHz)
This Gravity wireless switch kit provides simple 433 MHz RF communication between a transmitter and receiver module. Based on digital signal transmission, it offers strong wall penetration, ultra-low standby power consumption, and compatibility with any controller that can read and write digital ...
Gravity: LED Switch x 5 Pack
This is a simple LED-illuminated self-lock switch button. It’s just like a basic switch button, but it lights up color(red/yellow/green/blue/white) when pressed down, which gives you visual feedback. These little buttons can be used with micro:bit to realize various fun interactive projects, such...
Gravity: Digital 10A Relay Module For Arduino and Raspberry Pi
This Gravity digital relay module is designed for switching external loads from low-voltage controller boards. It suits 5V Arduino boards as well as 3.3V platforms such as Raspberry Pi, BBB, mbed, Intel Joule and Arduino 101.The module uses a high quality 3V relay and supports a wide input range,...
Gravity: LED Switch - Blue
This is a simple LED-illuminated self-lock switch button. It’s just like a basic switch button, but it lights up color(red/yellow/green/blue/white) when pressed down, which gives you visual feedback. These little buttons can be used with micro: bit to realize various fun interactive projects, suc...
Gravity: Digital Push Button (Green)
The DFRobot Gravity Digital Push Button (Green) is a simple momentary switch with an on-board LED indicator, designed for the Gravity interface system. It features an immersion gold PCB surface, a bright green cap, and a standard 3-pin digital connector for plug-and-play use with Arduino and othe...
Gravity: Digital Push Button (Blue)
The Gravity Digital Push Button (Blue) is a simple momentary push button module designed for the DFRobot Gravity interface. It features an onboard LED indicator, immersion gold PCB surface, and a coloured button cap. A "D" marking on the board identifies it as a digital sensor for quick wiring re...
Gravity: Digital Wireless Transmit Switch (433MHz)
A simple 433 MHz RF wireless switch set that transmits digital signals between a transmitter and receiver module. Based on Gravity interface connectors, it works with any microcontroller that can read and write digital signals — no complex AT commands or pairing protocols required. The transmitt...
Gravity: Digital 360° Tilt Sensor for Arduino
This sensor contains a metal ball that moves along its special internal structure on the effect of gravitation force so as to make a connection or disconnection. Therefore, it can be used as a simple tilt switch. With digital input, this sensor can be used with an Arduino expansion board to reali...
Gravity: I2C RGB LED Colorful Button Module
This is an I2C button module with RGB LED. The module not only supports reading button status like conventional ones, but also controlling RGB LED color and switching on/off the light independently, which could create more visual and interactive experiences for your projects. For example, when th...
Gravity: LED Button - Blue
This is a simple LED-illuminated switch button with a transparent cap. It’s just like a basic switch button, but it lights up color(red/ yellow/ green/ blue/ white) when pressed down, which gives you visual feedback. These little buttons can be used with micro:bit to realize various fun interacti...
Gravity: CT1780 1-Wire K-Type Thermocouple Amplifier (-270℃ to +1372℃ Temp Range)
·
The CT1780 is a cold-junction compensated amplifier for K-Type thermocouples, designed to make extreme temperature measurement easier to add to microcontroller projects. It digitises the tiny thermocouple signal and provides temperature readings with 0.25℃ resolution over a very wide measurement ...
micro:IO Extender- a micro:bit IO Expansion Board
The micro:IO Extender is a compact expansion board for the BBC micro:bit that breaks out all 19 I/O pins as Gravity-compatible 3-pin headers. It provides plug-and-play access to the full range of micro:bit GPIO, along with dedicated I2C and serial port headers, an onboard buzzer with switch, and ...
