All Products
Showing 1-20 of 25 products
Teensy 4.1
The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, and two new locations to optionally add more memory. The Teensy 4.1 is the same si...
2x3-pin 2mm PTH Header Pins and Socket for Teensy 4.1 Ethernet
·
This header pin and socket set is intended for connecting the Ethernet pins on a Teensy 4.1 to a custom circuit board.The socket is designed to be soldered to the bottom side of the Teensy 4.1, making it useful when you need a neat board-to-board connection for a custom PCB design.Specifications:...
USB Host Cable for Teensy 4.1 and 3.6
·
This adapter cable lets a Teensy 4.1 or Teensy 3.6 use its USB host capability by converting the dedicated 5-pin USB host header connection into a standard female USB Type-A port.Once fitted, your Teensy can act as a USB host for peripherals such as keyboards, mice, MIDI controllers and USB hubs,...
Teensy 4.1 Lockable Microcontroller Board
·
This lockable Teensy 4.1 is aimed at advanced developers moving from prototype to a secure production design. It keeps the high-performance 600 MHz ARM Cortex-M7 platform of the Teensy 4.1 while adding write access to the chip’s eFuses so your final application can be encrypted and locked to the ...
Teensy 4.1 Lockable Without Ethernet
·
This lockable Teensy 4.1 variant combines the high-performance Teensy 4.1 platform with production-focused code security, while omitting the Ethernet PHY for projects that do not need wired networking. It is built around the NXP MIMXRT1062DVJ6B ARM Cortex-M7 processor running at 600 MHz, with 8 M...
Ethernet Adapter for Teensy 4.1
·
This adapter makes it straightforward to add a wired Ethernet connection to a Teensy 4.1. It brings the functionality of the Ethernet Kit for Teensy 4.1 onto a single board, helping you get a network-capable setup together with less assembly.The tricky parts are already taken care of, with the RJ...
8MB PSRAM Chip for Teensy 4.1
·
Add extra RAM to a Teensy 4.1 with this 8 Megabyte PSRAM chip. It is intended for projects that need more working memory than the onboard RAM can provide.The chip is soldered to the smaller pads on the bottom side of the Teensy 4.1, underneath the SD card socket, between pins 31-32 and 33-34. Do ...
8MB PSRAM chip for Teensy 4.1
This 8 MB PSRAM (pseudo-static RAM) chip adds extra memory to the Teensy 4.1 microcontroller board. Solder it to the smaller pads on the bottom side of the Teensy 4.1, underneath the SD card socket, between pins 31–32 and 33–34. A second PSRAM chip can be added for a total of 16 MB. In Arduino, ...
Ethernet Kit for Teensy 4.1
The Teensy 4.1 is one of the most advanced and reliable development platforms on the market today. One of the biggest asks for the board is the ability to connect the 4.1 to the Internet via Ethernet. Luckily, with all the parts included in this kit (as well as a little bit of soldering), you'...
Teensy 4.1 (Headers)
The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, and two new locations to optionally add more memory. The Teensy 4.1 is the same size ...
Teensy 4.1 without Ethernet (Headers)
The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, and two new locations to optionally add more memory. The Teensy 4.1 is the same si...
Teensy 4.1 without Ethernet
The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, and two new locations to optionally add more memory. The Teensy 4.1 is the same si...
2x3 Male PTH Header - 2mm Pitch
·
This is a compact 2x3 male through-hole header with 2mm pin spacing, suitable for soldering into compatible PCBs and add-on boards.The connector is unshrouded, uses square male pins, and is designed for simple push-pull mating. It is the same style of header included with the Ethernet Kit for Tee...
Straight Male Header - Gold Plated, PTH, 0.1in, 24-Pin
·
This is a single-row strip of straight male breakaway header pins, useful for adding standard through-hole connections to development boards and maker projects.The header uses standard 0.1" (2.54mm) spacing and comes in a 24x1 format. This size is normally used with Teensy 3.5, Teensy 3.6 or Teen...
2.8 inch 320x240 Colour Touchscreen - ILI9341
·
This colour TFT touchscreen is a compact display module for adding high-resolution graphics to compatible maker projects. It provides a 320x240 pixel display area in a 2.8 inch format, using the ILI9341 controller.The display is recommended for use with Teensy 3.2 through to Teensy 4.1, making it...
3.2 inch 320x240 Colour TFT Touchscreen - ILI9341
·
Add a colour touchscreen to your Teensy project with this 3.2 inch TFT display. It provides 320x240 resolution for higher-resolution graphics and uses the ILI9341 display controller.The supplier recommends this display for use with Teensy 3.2 through to Teensy 4.1. It suits projects that need a c...
SparkFun Qwiic Shield for Teensy - Extended
An extended Qwiic shield that adds four Qwiic connectors to Teensy 4.1, Teensy 3.6, and Teensy 3.5 boards. Connects the I²C bus (GND, 3.3 V, SDA, SCL) to two horizontal and two vertical Qwiic ports for easy daisy-chaining of I²C sensors and actuators. Includes a PROG button that mirrors the Teen...
Teensy Stackable Header Kit (Extended)
These headers are made to work with the Teensy 4.1, Teensy 3.6, and Teensy 3.5 development boards. Each set of headers allows for your Teensy to be easily incorporated into a breadboard circuit or attach a shield on top of the board. This kit includes three headers (two 24-pin, and one 5-pin), en...
SparkFun MicroMod Teensy Processor with Copy Protection
The SparkFun MicroMod Teensy Processor with Copy Protection leverages the awesome computing power of the NXP iMXRT1062 chip and pairs it with the M.2 MicroMod connector to allow you to plug it into your choice of compatible MicroMod Carrier Board. This "copy protection" variant comes with additio...
USB-C to Micro-USB Cable - 1m for micro:bit
A USB-C to Micro-USB cable for connecting Micro-USB development boards and devices to modern USB-C laptops and chargers. Ideal for programming boards like the micro:bit, Raspberry Pi Pico, Teensy 4.1, Circuit Playground Express, DFRobot Beetle, Maker UNO, and other Micro-USB devices.Specification...
