Teensy 4.1 without Ethernet (Headers)

Jargon buster

Plain-language definitions for the technical terms used above.

ARM Cortex-M7

A family of 32-bit microcontroller processor cores designed for fast embedded applications. Knowing a board uses Cortex-M7 helps indicate it is aimed at more demanding tasks like audio processing, robotics, and high-speed data handling rather than very simple control jobs.

baud

Baud is the signalling rate of a serial connection, often used as the speed setting for UART communication. Matching the baud rate matters because both connected devices must use the same setting for readable data.

branch prediction

A processor feature that guesses which way a program will go at an if-statement or loop so it can keep working without waiting. It helps improve performance in complex code, which is useful for real-time projects that need quick responses.

CAN bus

CAN bus is a reliable two-wire communication network originally designed for vehicles and now common in machinery and robotics. It matters when you need multiple controllers or devices to share status and control messages in a noisy electrical environment.

Dynamic Clock Scaling

A feature that lets the processor change its running speed while the program is operating. This can help balance performance, power use, and heat, especially in projects that only need full speed some of the time.

EEPROM

A type of non-volatile memory that keeps stored data even when power is turned off. In a sensor module, it can be used to store settings or calibration data so they do not need to be re-entered every time.

FIFO

FIFO stands for "first in, first out", a way of handling stored items so the oldest one is read out first, like a queue. In electronics a FIFO is usually a small buffer that temporarily holds data, such as sensor samples or serial bytes, so a processor can collect it in batches instead of reading continuously.

Flash memory

Flash memory is non-volatile memory that retains stored data even when power is removed, and can be erased and rewritten in blocks. It lets data such as firmware, settings or saved records persist across power cycles.

FPU

A floating-point unit is hardware inside a processor that speeds up calculations with decimal numbers. This helps when projects use maths-heavy tasks such as motion sensing, filtering sensor readings, or audio processing.

Headers

Rows of connector contacts on a fixed pitch (commonly 2.54 mm) used to link a board to a breadboard, jumper wires, or another board. They come as male pin headers and female socket headers; when a module ships with pre-soldered headers it can be used straight away, whereas bare pads require soldering the pins yourself.

I2S

I2S is a digital audio interface used to send sound data between chips, such as from a microcontroller to an audio amplifier or DAC. It matters if your project needs cleaner digital audio output than a basic buzzer or PWM signal can provide.

microcontroller

A microcontroller is a small computer on a single chip that runs a stored program and controls connected inputs and outputs such as buttons, sensors, displays and communication interfaces. In a device built around one, it is the part that executes the code and coordinates the device's behaviour.

microSD card

A microSD card is a small removable flash memory card used to store data such as audio, images, logs or program files. Its capacity and formatting (often FAT32 or exFAT) affect how much can be stored and whether the card needs preparing before use.

NXP iMXRT1062

A high-speed microcontroller chip from NXP's i.MX RT1060 family, built around an ARM Cortex-M7 core typically clocked at around 600 MHz. When a board lists this chip as its processor, it indicates the board's processing speed, memory and peripheral set, and which software libraries and pin features are available.

PWM

Pulse Width Modulation is a way for a digital pin to simulate variable output power by switching on and off very quickly. It matters for controlling things like LED brightness, motor speed, or servo-style signals from a microcontroller pin.

RAM

RAM (random-access memory) is fast, temporary memory a device uses for working data while it is running; in its common volatile form, its contents are lost when power is removed. Some devices offer a mode that applies settings to RAM only, which is handy for testing changes temporarily because they are not stored permanently and disappear at power-off.

RTC

A Real-Time Clock keeps track of time even when the main processor is asleep or powered down, usually with a small backup battery. It matters for data logging and tracking projects that need accurate timestamps.

SAMD51

A family of 32-bit ARM Cortex-M4 microcontroller chips from Microchip, often used to run the main program on a development board. When a board is built around a SAMD51 it generally offers more speed and memory than basic 8-bit microcontrollers, which helps with demanding tasks such as graphics, audio or fast data handling.

SPI

A fast serial communication bus often used for displays, memory cards, and sensors. It matters because SPI devices need specific pins for clock and data, plus a separate chip-select line for each device.

tightly coupled memory

A block of memory connected very directly to the processor for fast, predictable access. It matters for timing-sensitive code such as audio, motor control, or data acquisition where delays from ordinary memory access can cause problems.

USB host

A USB host is the side of a USB connection that controls attached devices, like a computer talking to a keyboard or flash drive. This matters because most microcontroller boards are normally USB devices, so adding USB host support lets them use common USB peripherals.

VBAT

VBAT is a backup battery power pin used to keep a small part of a circuit, such as a real-time clock, running when the main power is off. It matters if your project needs to remember the time while the board is shut down.