All Products

SKU: AF-615

This gold-eye sharps needle set is perfect for hand-sewing with conductive thread and wearable electronics parts. The pack includes 20 needles in sizes #3 to #9, giving you the right needle for any e-textiles or general sewing task. The majority of the needles (sizes #4–#8) work well with 2-ply ...

SKU: SF-TOL-10405

This sewing needle set is designed for e-textile projects, with eye sizes large enough to easily thread conductive thread. The set includes both large and small needles to suit different stitching needs — from thick fabric and felt to finer materials. Key Features E-Textile Ready – Eyes sized ...

SKU: AF-1850

Add a touch of sparkle to your wearables with the Adafruit Gemma Sequin Starter Pack. This beginner-friendly kit includes a GEMMA V2 sewable microcontroller, warm white LED sequins, conductive thread, needles, and a coin cell battery holder — everything you need to start sewing glowing electronic...

SKU: PI-COM1900

A sewable coin cell battery holder designed for wearable electronics projects. The metal tabs have small 1mm holes that accommodate a #5 or smaller needle, making it easy to sew directly onto fabric with conductive thread. The holder accepts standard CR2032 lithium coin cells (3V, ~200mAh), whic...

SKU: AF-653

This sewable CR2032 battery holder makes it easy to add power to wearable electronics projects. Two small 1mm holes in the metal connection tabs are perfectly sized for a #5 or smaller needle to pass through, so you can stitch it directly onto fabric with conductive thread. One tab connects to g...

SKU: DF-FIT0872

A gold-plated IPEX (U.FL) to SMA male (inner needle) pigtail cable for connecting wireless modules to external antennas. The gold-plated connectors have passed 48-hour salt spray testing for long-lasting corrosion resistance. Built with RG1.13 wire and a high-density shielding layer, this cable ...

SKU: PI-ANT-BITS

A set of three replacement soldering tips for the Antex XS25 soldering iron. Each tip offers a different profile to suit various soldering tasks, from fine-pitch SMD work to general through-hole soldering. Package Contents No. 51 – 2.3mm needle tip No. 53 – 2.3mm tip No. 55 – 0.5mm pointed t...

SKU: WS-19297 · MPN: 19297

This 5G omni-directional antenna provides 18dBi gain across a wide 600–6000MHz frequency range, covering 5G, 4G, 3G, and GNSS bands. The omni-directional radiation pattern delivers consistent signal quality in all directions without needing to orient the antenna toward a specific tower. It conne...

SKU: AF-1405

Get started with the fabulous Adafruit Flora platform with this lovely budget kit, just enough to get you started with this fun wearable computer. Included are enough parts to make your first wearable electronic project. There's a Flora motherboard, four ultra-bright chainable RGB pixels, a 3x...

SKU: LB-LR0309-45

A 1-metre length of soft conductive sewing thread made from stainless steel, designed for wearable electronics projects. Use it to sew electrical connections between LilyPad components, sewable LEDs, and batteries — replacing traditional wires with flexible, stitchable conductors. Key Features ...

SKU: PK-3D01

A comprehensive finishing toolkit for 3D printing, containing everything you need to remove rafts and supports, trim, carve, sand, and polish printed objects in ABS or PLA. All tools are securely housed in a water-repellent multifunction tool box for convenient storage and transport. Key Feature...

SKU: SF-PRT-08100

Individual crimp pins for use with polarized connector housings. These pins prevent incorrect or reversed connections, making them ideal for power, sensor, and general-purpose wiring on perfboard and PCB projects. Attach using needle-nose pliers and a soldering iron — no special crimping tools r...

SKU: AF-2769

The Circuit Playground Express Educator's Pack is a comprehensive classroom kit built around Adafruit's versatile Circuit Playground Express board. It includes everything educators need to teach electronics, coding, and wearable technology — from conductive thread and servos to battery packs and ...

SKU: SF-TOL-12078

These needle tipped multimeter probes are great for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Not only can these make a good replacement for any multimeter probes you have now that are damaged or worn, but thanks to the needle tip, these probes are great f...

SKU: AF-5473

Why settle for a boring old hex key set when you can get one with a burst of color like this 9 Piece Rainbow Metric Allen Wrench / Hex Key Set. If your DIY project has hexagonal screws, you’re gonna need hex keys (also known as Allen wrenches or Allen keys) - and we always like it when our tools ...

SKU: AF-641

A 3-ply conductive thread made entirely from 316L stainless steel fibre. Thin enough to sew by hand with a medium-eye needle, yet strong and smooth — ideal for wearable electronics, e-textile projects, and sewable circuits. With a resistivity of approximately 10 ohms per foot, this thread can dr...

SKU: PI-TEK011

Enter the world of e-textiles and wearables with custom reusable parts that allow you to make and remake as many times as you want!  Are you just learning how to sew and want to learn a bit of basic electronics too? Do you have basic sewing skills and want to experiment with adding lights...

SKU: PL-3434

This is a full set of replacement gears for the Power HD High-Torque Servo 1501MG.

SKU: LB-SD-3502

A six-piece precision Torx screwdriver set from Pro'sKit, featuring AISI 8660 Cr-Mo-V alloy steel blades for durability and hardness. Each screwdriver has a rotating end cap for fine control and a non-slip ABS handle for comfortable use during detailed repair work. Key Features Cr-Mo-V Alloy S...

SKU: AF-1494

Kiss those days of heat-shrink, melted jacketing and clumsily-arranged third-hand tools goodbye! Go 'cold splice' with these snap-able plastic splices for fast connections. Use with any 22-26 AWG solid core wire and slip them into the plastic splice so that they slide into the metal teeth. Then s...