All Products

SKU: PR-PIM367

A low-energy, high-falutin, electronic paper (ePaper / eInk / EPD) display for your Pi, in three different colour schemes: red/black/white, yellow/black/white, and black/white! NOW IN NEW COLOUR SCHEMES! Inky pHAT's beautiful 212x104 pixel, display is ideal for displaying simple graphics and ...

SKU: PL-973

A 20" (50 cm) 16-conductor ribbon cable with IDC connectors on both ends. Ideal for connecting to 16-pin character LCDs, shrouded box headers, and other 2×8 pin interfaces in electronics projects. Specifications Conductors – 16 Connector Type – IDC (both ends) Length – 20" (~50 cm) Pin Pitc...

SKU: AF-5673

A high-quality 5 Megapixel camera breakout designed for hobby-level microcontrollers like the RP2040 and ESP32-S series. The OV5640 sensor with a 120-degree wide-angle lens connects via an 8-bit parallel data interface, making it compatible with chips that have enough pins, DMA, and RAM to captur...

SKU: DF-DFR0734

An industrial-grade RS232 expansion shield designed specifically for the LattePanda V1. Adds one RS232 port (D-Sub 9-pin male) with signal isolation, power isolation, and surge protection for reliable serial communication in demanding environments. Uses a stackable connection with copper standof...

SKU: DF-FIT0761

These Inductive Ring Proximity sensors are designed to detect metal objects entering or passing through the ring. They operate on a 6-36V power supply and offer NPN output. The sensor features less than 1ms response time, high accuracy and stable performance, which could work well even in the det...

SKU: AF-458 · MPN: 458

Make a scrolling sign, or a small video display with this 8x8 gridded bi-color LED matrix. Only 1.2" on a side, it is quite visible but not so large it wont plug into a breadboard! Every grid has two LEDs inside so you can have it display red, green, yellow or with fast multiplexing any color ...

SKU: DF-FIT0760

These Inductive Ring Proximity sensors are designed to detect metal objects entering or passing through the ring. They operate on a 6-36V power supply and offer NPN output. The sensor features less than 1ms response time, high accuracy and stable performance, which could work well even in the det...

SKU: PR-PIM219

The Mini Black HAT Hack3r is a compact breakout board that gives you full access to all Raspberry Pi GPIO pins while a HAT or pHAT is attached. Ideal for debugging HAT projects, probing signals, or combining a HAT with other circuits on a breadboard. Every GPIO pin is clearly labelled with its f...

SKU: AF-5132 · MPN: 5132

This GH60-compatible 60% keyboard shell is the perfect starting point for a custom mechanical keyboard build. Made from injection-moulded plastic with an eye-catching metallic-glitter finish and styled grooves, it looks great while keeping costs well below milled aluminium alternatives. Designed...

SKU: AF-3867 · MPN: 3867

Here at Adafruit we love discovering new and exotic glowing things. Like moths to the flame, we were intrigued by these fresh Flexible Silicone Neon-Like LED Strips! They look a lot like neon, but without the need for expensive transformers, glass tubing or inert gasses. Super flexible an...

SKU: PI-KEY0101

This ultra-slim wireless keyboard with built-in touchpad is a compact all-in-one input solution for your Raspberry Pi, PC, tablet, or phone. At just 260 × 83 × 13.5 mm and 210 g, it's small enough to carry while travelling and easy to stow away when not in use. The high-performance touchpad supp...

SKU: SF-TOL-13831

This is a high-quality switching ‘wall wart’ AC to DC 5.1V 2,500mA USB Micro-B wall power supply manufactured specifically for projects that require a higher level of power. This compact USB AC charger is UL and CSA listed and incorporates a highly regulated output switching power design to as...

SKU: AF-3961 · MPN: 3961

With our fun assortment of conductive materials, cosplay and wearables have never been easier to craft!  This Conductive Nylon tape goes great with our other interesting materials, such as copper tape, ITO glass or plastic, conductive inks, etc. We found that the metallic nylon fabric ha...

SKU: AF-857 · MPN: 857

Add a typing interface to your project with this microcontroller-friendly miniature keyboard. We found the smallest PS/2+USB keyboard available, a mere 8.75" x 4.65" x 0.6" (220mm x 118mm x 16mm)! It's small but usable to make a great accompaniment to either a microcontroller project or a comp...

SKU: AF-4360 · MPN: 4360

Wow did you hear about that new sequel coming out? No, no, not The Matrix 4 – it's The Art of Electronics - X Chapters! More delicious, practical electronic advice from the masters, Paul Horowitz and Winfield Hill. The Art of Electronics: The X Chapters expands on topics introduced in the be...

SKU: AF-3785 · MPN: 3785

This isolated PoE splitter takes a unified Power over Ethernet signal from a single RJ-45 cable and separates it into data (Ethernet) and regulated 5V DC power via a Micro USB plug. It works with any 802.3af-capable router or switch, letting you power non-PoE devices over a standard Ethernet run ...

SKU: AF-2260 · MPN: 2260

A compact, panel-mountable 5" HDMI monitor with a built-in resistive touchscreen. Featuring the TI TFP401 DVI/HDMI decoder, this display works with any computer that has HDMI output — simply plug in and go. The resistive touchscreen registers as a standard USB mouse, so no special drivers are ne...

SKU: SF-SEN-18009

The LIDAR-Lite v4 Qwiic from GARMIN is a high-performance, wireless optical distance measurement sensor that doesn't require any soldering to get started. This is the ideal solution for drone, robot, IoT, or unmanned vehicle operations when space is tight and power is limited. This sensor has up ...

SKU: DF-SER0073 · MPN: SER0073

Built for demanding robotics and automation, this industrial servo combines a high-voltage brushless motor, hardened steel gearing and non-contact magnetic encoder feedback for strong, repeatable motion control.At 24V it provides up to 750 kg·cm stall torque, with standard PWM control from 500–25...

SKU: PR-PIM400

A 128x64 pixel, 2.15" LCD display with snazzy six-zone RGB backlight and six capacitive touch buttons. GFX HAT makes an ideal display and interface for your headless Pi projects. GFX HAT riffs off our beloved Display-O-Tron HAT, but gives you the flexibility of individual pixels, letting you d...