All Products

SKU: SF-COM-12766

The L7812 is a three-terminal positive voltage regulator with a fixed 12V output. It provides stable local regulation with built-in protection against overcurrent, thermal overload, and short circuits, making it a reliable choice for powering 12V components in your projects. With a maximum outpu...

SKU: SF-COM-10926

A 1N5819 Schottky diode rated at 1A and 40V. Schottky diodes are characterised by their low forward voltage drop (typically ~0.3V) and very fast switching speed, making them ideal for flyback protection on motor driver circuits, reverse polarity protection, and high-frequency rectification. Spec...

SKU: AF-3200

The Teensy 3.x Feather Adapter rearranges the pins of a Teensy 3.x board to match the Adafruit Feather form factor and pinout. This allows the Teensy to work with the full range of FeatherWing add-ons — motor drivers, GPS modules, LED matrices, OLEDs, and more. The adapter also includes a built-...

SKU: AF-352

Warning: This power supply ships with a US/Canada/Japan plug. It is not certified for use in Australia. You can use a plug adapter or replace the cable with a standard figure-8 (IEC C7) cable. A high-capacity 12V 5A (60W) switching power supply for projects that need serious current. Accepts 1...

SKU: DF-FIT0367

This high quality, low profile, pure copper heatsink is a perfect solution for cooling off small surface-mount components such as stepper motor drivers, SOCs or a  LattePanda. The pure copper increases heat dissipation and transfer to keep your device running cooler in warm environments....

SKU: PL-1152

An enclosed battery holder for three AA cells with a built-in on/off switch. The snap-on lid slides over the batteries to fully enclose them, keeping the cells secure during use. Provides approximately 4.5 V with three alkaline AA batteries (3 × 1.5 V) or 3.6 V with three NiMH rechargeable cells...

SKU: DF-FIT0223

A medium-sized aluminium heat sink with pre-applied 3M 8810 thermal adhesive tape on the back. Simply peel off the blue protective film and stick it directly onto your IC or chip — no thermal paste or glue required. The adhesive bond is strong and long-lasting. Suitable for stepper motors, motor...

SKU: DF-FIT0191

A compact aluminium heat sink with pre-applied 3M 8810 thermal adhesive tape on the back. Simply peel off the blue protective film and stick it directly onto your IC or chip — no thermal paste or glue required. The adhesive bond is strong and long-lasting. Suitable for stepper motor drivers (suc...

SKU: SF-KIT-14180

Robots are fun, and Arduinos are easy. So wouldn’t it be nice if there were a kit that included everything you need to get your Arduino device set up to control a simple two-motor-circuit buddy? The SparkFun Ardumoto Shield Kit is perfect for any robot enthusiast and includes an Ardumoto Shield, ...

SKU: PL-2508

This shield makes it easy to build an Arduino-controlled Zumo robot. The shield mounts onto an assembled Zumo chassis, connecting directly to the chassis’s battery terminals and motors, and the Arduino plugs into the shield, face down. This shield includes dual motor drivers, a buzzer for pl...

SKU: AF-1493

A compact aluminium heat sink designed for surface-mount components such as SoCs, motor drivers, linear regulators, FETs, and other SMT packages. Its small footprint and tall fin design provide effective thermal dissipation where space is tight. The heat sink features three tall fins for increas...

SKU: AF-1515

A 10-pack of ultra-low-profile aluminium heat sinks designed for surface-mount components such as SoCs, motor drivers, linear regulators, FETs, and other SMT packages. Their tiny footprint and minimal height make them perfect for tight enclosures where every millimetre counts. Each heat sink fea...

SKU: AF-3928

The Adafruit CRICKIT for micro:bit is a robotics and electronics driver board designed for the BBC micro:bit. Plug your micro:bit into the 40-pin edge connector and start controlling motors, servos, solenoids, NeoPixels, capacitive touch sensors, and a speaker — all managed over I2C via the Adafr...

SKU: PI-ESP005

A smart LCD with Bluetooth LE. Monitor and control other Bluetooth LE devices, act as a wireless display, create your own smart conference badge, or even just display the status of your code - all while drawing tiny amounts of power. Pixl.js uses Espruino, so you program it in JavaScript - ...

SKU: PR-PIM175

The Explorer HAT Pro is a feature-packed add-on board for Raspberry Pi that brings together digital I/O, analog inputs, capacitive touch, motor drivers, LEDs, and a mini breadboard — all on a single HAT. It's ideal for robotics, games, science experiments, and learning electronics with the Pi. K...

SKU: PR-PIM199

Explorer pHAT is the perfect prototyping side-kick for your Raspberry Pi! A more diminutive version of our popular Explorer Hat Pro, it's cheaper and designed to fit perfectly on a Raspberry Pi Zero! We've added a heap of useful input and output options that will take your ...

SKU: PR-PIM137

Explorer pHAT is the perfect prototyping side-kick for your Raspberry Pi. A compact version of the popular Explorer HAT Pro, it's designed to fit perfectly on a Raspberry Pi Zero. Packed with useful input and output options, Explorer pHAT is great for driving motors, reading analog sensors, and ...

SKU: AF-1043

A compact aluminium heat sink from Cool Innovations, designed for surface-mount components such as SoCs, motor drivers, and other SMT packages. Trusted by engineers for its low cost, ease of use, and excellent thermal performance in a tiny footprint. The heat sink features four round fins for in...

SKU: PR-PIM142

5.... 4.... 3.... 2.... 1.... Turn your Raspberry Pi into a spaceship! This robot chassis is designed to be used with our Explorer HAT, Explorer HAT Pro, or Explorer pHAT boards though it will work with other motor drivers! The kit is a great way to introduce yourself to robots and controlli...

SKU: AF-3093

The Adafruit CRICKIT for Circuit Playground Express is a robotics and electronics driver board that bolts directly onto a Circuit Playground Express. It adds motor drivers, servo outputs, capacitive touch inputs, NeoPixel control, and an audio amplifier — all managed over I2C via the Adafruit see...