All Products
AI Overview
If you meant Raspberry Pi 40-pin GPIO (2x20, 2.54mm pitch) headers, these are the best fits:
Raspberry Pi 2x20 (40-pin) GPIO headers
- Standard 2x20 male header (great for Pi Zero or any board needing a through-hole GPIO header): Raspberry Pi GPIO Male Header - 2x20 ($1.55)
- Keyed/polarised boxed (shrouded) 2x20 for ribbon-cable style connections: Raspberry Pi GPIO Shrouded Header - 2x20 ($2.15)
- Stacking/extra-tall 2x20 female for HAT stacking/clearance:
- Low-profile HAT headers:
- Through-hole short female: GPIO Header for Raspberry Pi HAT - 2x20 Short Female Header ($4.20)
- SMT short female: SMT GPIO Header for Raspberry Pi HAT - 2x20 Short Female Header ($3.90)
- Extra reach/clearance female headers (extended height options):
Single-row “40-pin” breakaway strips (not 2x20)
If you meant one row of 40 pins (common for Arduino/prototyping), these are 2.54mm pitch breakaway strips:
- Arduino Male Pin Headers | 0.1 (2.54 mm) Straight Black ($3.75)
- Longer pins: 40 Pin Break Away Male Header- Long Straight-10 Pcs ($4.75)
- Right-angle: 40 Pin Break Away Male Header- Right Angle-10 Pcs ($3.75)
- Single-row female strip: 40 Pin Female Header Strip ($1.55)
Related (if you’re extending the Pi’s 40-pin header)
- 40-pin GPIO extender cable (2x20 to 2x20): 40 Pin GPIO Extension Cable for any 2x20 Pin Raspberry Pi - 150mm / 6 long ($7.00)
- Breakout/extension kit: GPIO Kit for Raspberry Pi Model B+ ($5.85)
(For completeness, if you meant jumper shunts rather than headers: 40 Pin Dual In-Line (DIL) / Jumpers ($2.30))
Showing 41-60 of 100 products
TT Gearbox Motor
·
The classic yellow "TT" plastic gearbox motor, in every gear ratio and lead termination we can get. Dual output shafts, 3–6VDC, and the standard TT footprint that fits every common bracket, wheel and chassis. Choose the gear ratio first The ratio decides the trade between speed and torque. It is ...
INA228 Qwiic Current Sensor Breakout
·
This compact Qwiic breakout uses the Texas Instruments INA228 digital power monitor to measure DC current and power with high precision over I2C. The onboard 20-bit delta-sigma ADC supports readings for current, voltage, power, temperature, energy and charge accumulation.For quick wiring, the boa...
TermDriver 2 USB-to-Serial Adapter with IPS Display
·
This compact USB-to-serial interface adds a built-in screen to the serial adapter workflow, so you can see data passing by instead of debugging blind. It handles everything from low-speed console output to high-speed UART traffic, with line status and traffic visible on the device itself.The disp...
Pimoroni Pico Display Pack 2.8-inch
·
Add a bright 2.8-inch colour display to your Raspberry Pi Pico project with this Pimoroni display pack. It uses a 320×240 pixel IPS LCD driven by an ST7789V controller, giving you a generous active screen area for menus, status displays, dashboards and simple graphics.The board includes four tact...
MicroMod Main Board - Double
·
This Double Main Board is a carrier for SparkFun’s MicroMod ecosystem, letting one MicroMod Processor Board connect to up to two MicroMod Function Boards. The M.2 MicroMod connectors make it straightforward to align the keyed edge connectors and secure the boards with screws.USB-C is provided for...
Raspberry Pi Zero W Basics Kit
The Raspberry Pi Zero W Basics Kit includes the Pi Zero W single-board computer along with essentials to get started. The Pi Zero W adds built-in WiFi and Bluetooth to the compact Pi Zero form factor, making it ideal for lightweight IoT projects, headless servers, and embedded applications. Key ...
LiPo SHIM for Pico
This SHIM provides a convenient way of powering your Raspberry Pi Pico from a LiPo/LiIon battery. You can recharge the battery easily by providing power to the Pico's USB port. Solder this neat little square to the pins on the back of your Pico, plug in a suitable lithium-ion/polymer battery ...
40 pin 15CM Jumper wire M/M
A 40-pin ribbon of male-to-male (M/M) jumper wires, 15cm long, in ten rainbow colours. The wires fit standard 0.1″ (2.54mm) pitch headers and can be kept as a ribbon for neat harnesses or separated into individual jumpers. Key Features Male-to-Male (M/M) – 0.1″ male header pins on both ends 4...
1.12 Mono OLED (128x128, white/black) Breakout
This crisp 1.12″ monochrome OLED breakout features a 128×128 pixel white-on-black display, ideal for adding graphing, readouts, and basic icons to your project. OLEDs deliver excellent contrast and brightness, and this compact module fits easily into space-constrained builds. The breakout connec...
Pan-Tilt HAT - Full kit
Ideal for a mini CCTV system, this set of horizontal and vertical motion servos will give you Pi camera movement with a minimum of fuss. Pan-Tilt HAT lets you mount and control one of our pan-tilt modules right on top of your Raspberry Pi. The HAT and its on-board microcontroller let you in...
BME680 Breakout - Air Quality, Temperature, Pressure, Humidity Sensor
The state-of-the-art BME680 breakout lets you measure temperature, pressure, humidity, and indoor air quality, and is Raspberry Pi and Arduino-compatible! Use this breakout to monitor every aspect of your indoor environment. Its gas resistance readings will react to changes in volatile organic...
BH1745 Luminance and Colour Sensor Breakout
A really sophisticated and accurate colour and luminance sensor breakout that's Raspberry Pi and Arduino compatible. As well as detecting RGB colour and light level, it has added bells and whistles like 50/60Hz light noise rejection, a wide detection range, and two illumination LEDs. T...
Little Bird Breadboard Compatible Speaker
This breadboard-compatible speaker is a Little Bird exclusive, pre-wired with jumper wires and standard header pins so it plugs directly into a solderless breadboard. It's a quick, no-solder way to add audio output to your Arduino, Raspberry Pi, or microcontroller projects. The lightweight 38 mm...
Adafruit Qwiic / Stemma QT 5 Port Hub
·
The Adafruit Qwiic / STEMMA QT 5-Port Hub is a passive I2C splitter that lets you connect up to five STEMMA QT or Qwiic devices in a star topology instead of a long daisy chain. This reduces I2C line capacitance and gives you more flexibility in your mechanical layout. The board has five vertica...
Jumper Wires Premium 12 F/F Pack of 10
Premium female-to-female jumper wires for connecting between male headers on breadboards, Arduinos, Raspberry Pis, and other 0.1″ (2.54 mm) pitch prototyping boards. Each wire is 30 cm (12″) long, providing plenty of reach for typical bench setups. Multiple wires can be connected side by side on...
Adafruit I2C Controlled + Keypad Shield Kit for 16x2 LCD
·
The Adafruit I²C Controlled + Keypad Shield Kit lets you drive a 16×2 character LCD and read 5 navigation buttons using only two I²C pins on your Arduino. This frees up the 9+ digital pins that a standard LCD connection would require, while still allowing other I²C devices to share the bus. The ...
DRV8838 Single Brushed DC Motor Driver Carrier
Overview DRV8838 Single Brushed DC Motor Driver Carrier, bottom view with dimensions. TI SN754410 (16-pin DIP) next to the #2135 DRV8835 carrier (14-pin DIP) and #2990 DRV8838 carrier (10-pin DIP) for size reference. Texas Instruments’ DRV8838 is a tiny H-bridge motor driver IC that can...
Adafruit Si5351A Clock Generator Breakout Board - 8KHz to 160MHz
·
The Adafruit Si5351A Clock Generator Breakout lets you generate precise, arbitrary clock frequencies from 8 kHz to over 150 MHz using a simple I2C interface. With a precision 25 MHz crystal reference and internal PLLs and dividers, it eliminates the need to hunt for specific crystals or oscillato...
Premium Male/Male Jumper Wires - 20 x 6 (150mm)
·
A set of 20 premium male-to-male jumper wires in a ribbon cable strip, each 150 mm (6") long. The wires feature 0.1" (2.54 mm) male header contacts on both ends and come in 10 rainbow colours (2 of each). Pull individual wires from the ribbon as needed, or keep them together for organised wire ha...
Premium Male/Male Jumper Wires - 20 x 3 (75mm)
·
A pack of 20 premium male-to-male jumper wires in a convenient ribbon cable format. Each wire is 75 mm (3") long with 0.1" (2.54 mm) male header contacts on both ends, fitting cleanly onto standard-pitch headers. The 20-pin ribbon includes two wires in each of ten rainbow colours for easy identi...
