All Products

SKU: PI-CORETEC-001

This well-crafted kit from Coretec Robotics has all the bits for the heart of your own capable little four-wheel drive rover. Includes: Explorer pHAT with motor drivers and IO Acrylic Chassis with camera mount All the needed nuts and bolts 4x Micro Metal Gear Motor with easy-connect shim...

SKU: AF-3343

The Adafruit CRICKIT FeatherWing is a robotics and electronics driver board that plugs into any Feather mainboard. It adds motor drivers, servo outputs, capacitive touch inputs, NeoPixel control, and an audio amplifier — all managed over I2C via the Adafruit seesaw co-processor, so it only uses t...

SKU: EC-CDP03051C

The Arduino CNC Shield V3.51 by Protoneer turns an Arduino Uno into a 4-axis CNC controller. Compatible with GRBL 0.9 firmware, it accepts Pololu-style stepper drivers (sold separately) and supports up to 4 stepper motors for CNC routers, laser cutters, 3D printers, and other precision motion pro...

SKU: PL-5033

The Motoron M3H256 Triple Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. Each module can independently control up to three motors, and multiple Motoron boards can be stacked on top of the same Raspberry Pi for projects that ne...

SKU: PL-5063

The Motoron M1U256 Single I²C Motor Controller offers a compact solution for controlling two DC motors using a UART serial interface. Multiple Motoron controllers can be connected to the same serial bus, making it easy to expand a system with additional motors. The M1U256 operates from 4.5 V to 4...

SKU: PL-5052

The Motoron M2H family of dual high-power motor controller add-on boards makes it easy to control up two bidirectional, brushed DC motors with a compatible Raspberry Pi (Model B+ or newer). The M2H controllers are designed to stack on top of a Raspberry Pi (Model B+ or newer), similar to a HAT (H...

SKU: DF-DFR1237 · MPN: DFR1237

Build edge AI, vision and interactive HMI projects around the ESP32-P4, a dual-core RISC-V processor with a single-precision FPU and hardware-accelerated H.264 video encoding at 1080p@30fps. This kit is designed for applications such as AI cameras, smart displays, video doorbells, robot vision sy...

SKU: SF-KIT-30716 · MPN: KIT-30716

Add another automated planting zone to your AgXRP setup with this expansion for the AgXRP Starter Kit. It lets students and educators add a second pump and soil moisture sensor, so they can water a second plant independently and compare soil conditions or watering schedules side by side.The pack ...

SKU: SF-KIT-30713 · MPN: KIT-30713

Imagine a classroom where students do not just read about the future of agriculture  they build it. The DIY AgXRP Starter Kit is an open-source autonomous robotics platform that bridges the gap between STEM education and sustainable farming. By providing the core electronics and encouraging...

SKU: PR-PIM082

Explorer HAT Pro adds a lot of useful tools to your Raspberry Pi.It has digital inputs and outputs, capacitive touch pads, croc. clip compatible pads, coloured LEDs, analog inputs, motor drivers, and a mini breadboard for prototyping your projectsGreat for little robots, games, science ...

SKU: SF-PRT-09599

A 5g syringe of white thermal compound (also known as thermal grease or thermal paste) for improving heat transfer between components and heatsinks. Essential for any project where heat dissipation is critical. Composed of 50% silicone, 20% carbon, and 30% metal oxide with a thermal conductivity...

SKU: AF-276

This FCC/CE certified and UL-listed switching power supply delivers a clean, regulated 5V DC output at up to 2A (2,000mA) via a standard 5.5×2.1mm DC barrel jack. It accepts 110–240V AC input and is suitable for powering LED strips, motors, and other current-hungry 5V devices. Key Features Out...

SKU: DF-ROB0124

The HCR (Home Care Robot) is a full-metal open-source mobile robot research platform designed for robotics research and service robot application development. Equipped with three high-torque omni wheels with encoders, it is capable of omnidirectional translational and rotational motion. The plat...

SKU: SF-COM-12766

The L7812 is a three-terminal positive voltage regulator with a fixed 12V output. It provides stable local regulation with built-in protection against overcurrent, thermal overload, and short circuits, making it a reliable choice for powering 12V components in your projects. With a maximum outpu...

SKU: SF-COM-10926

A 1N5819 Schottky diode rated at 1A and 40V. Schottky diodes are characterised by their low forward voltage drop (typically ~0.3V) and very fast switching speed, making them ideal for flyback protection on motor driver circuits, reverse polarity protection, and high-frequency rectification. Spec...

SKU: AF-3200

The Teensy 3.x Feather Adapter rearranges the pins of a Teensy 3.x board to match the Adafruit Feather form factor and pinout. This allows the Teensy to work with the full range of FeatherWing add-ons — motor drivers, GPS modules, LED matrices, OLEDs, and more. The adapter also includes a built-...

SKU: AF-352

Warning: This power supply ships with a US/Canada/Japan plug. It is not certified for use in Australia. You can use a plug adapter or replace the cable with a standard figure-8 (IEC C7) cable. A high-capacity 12V 5A (60W) switching power supply for projects that need serious current. Accepts 1...

SKU: DF-FIT0367

This high quality, low profile, pure copper heatsink is a perfect solution for cooling off small surface-mount components such as stepper motor drivers, SOCs or a  LattePanda. The pure copper increases heat dissipation and transfer to keep your device running cooler in warm environments....

SKU: PL-1152

An enclosed battery holder for three AA cells with a built-in on/off switch. The snap-on lid slides over the batteries to fully enclose them, keeping the cells secure during use. Provides approximately 4.5 V with three alkaline AA batteries (3 × 1.5 V) or 3.6 V with three NiMH rechargeable cells...

SKU: DF-FIT0223

A medium-sized aluminium heat sink with pre-applied 3M 8810 thermal adhesive tape on the back. Simply peel off the blue protective film and stick it directly onto your IC or chip — no thermal paste or glue required. The adhesive bond is strong and long-lasting. Suitable for stepper motors, motor...