All Products
Showing 21-40 of 52 products
Kitronik Line Following Buggy for the BBC micro:bit
The Line Following Buggy with :MOVE line following board for the BBC microbit is the newest version of our very popular line following buggy. It features the :MOVE line following board and has fewer parts. Not only does it provide far superior line following it also makes the kit much easier to a...
ST-LINK V2 Emulator and Debugger
The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board. In addit...
Line Following Buggy for the BBC micro:bit
The Line Following Buggy with :MOVE line following board for the BBC microbit is the newest version of our very popular line following buggy. It offers a significant upgrade in the form of our new :MOVE line following board. Not only does it provide far superior line following it also makes th...
Motor Driver Board for the BBC micro:bit - V2
This board provides a simple way to add motor driving capability to a BBC micro:bit. It allows two motors to be driven with full forward, reverse & stop control. It has terminal blocks to connect four input devices and a regulated 3V supply is fed in to the 80 way connector to power the ins...
Firebeetle Board-M0 (V1.0)
FireBeetle is a product series of small development boards developed by DFRobot. It contains various chipboards and expansion boards that can be used alone or in combination. The same as Arduino M0, FireBeetle M0 also adopts the high-performance low-power chip ATSAMD21G18 ARM Cortex M0+. With up ...
Adafruit PCB Ruler v2 - 6 - Default
·
Keep a handy component reference at your fingertips with this gold-plated PCB ruler. Measuring approximately 25 × 152 mm (1″ × 6″) on standard-thickness FR4, it features the most common surface-mount component packages you'll encounter — QFN, TDFN, SOIC, SOP, J-Lead, and more — all shown at actua...
VS1053 MP3 Shield
An Arduino-compatible MP3 shield based on the VS1053B audio codec from VLSI. It decodes all major audio formats — including MP3, OGG Vorbis, AAC, WMA, FLAC, WAV, and MIDI — and can record in Ogg Vorbis, IMA ADPCM, and 16-bit PCM from the onboard microphone or line-in input. With an SD card slot ...
Alchitry Ft V2
·
The Ft V2 is designed for Alchitry projects that need to move a lot of data in or out of a design. It is built around the FT600Q, which is capable of up to 200MB/s.In real-world use, bandwidth will be a little lower; the supplier notes they have achieved about 190MB/s from the Ft. This makes it a...
Alchitry Au V2 Artix-7 FPGA Board
·
The Alchitry Au V2 is a powerful FPGA development board built around a Xilinx Artix 7 device. It is aimed at engineers, students and makers who are ready to move beyond microcontroller-style programming and into field-programmable gate arrays.The board breaks out 104 IO pins across two headers an...
micro:Maqueen Plus V2 (18650) with Mechanic and micro:bit V2
·
Designed for classroom robotics, after-school projects and competitions, this STEAM robot bundle combines the Maqueen Plus V2 18650 vehicle body with a micro:bit V2 board and the micro:Maqueen Mechanic kit for forklift, push, beetle and loader builds.Maqueen Plus V2 adds more expansion options, a...
micro:Maqueen Plus V2 (18650) with HUSKYLENS
·
This compact programmable robot platform is designed for classroom robotics, AI experiments and hands-on engineering projects. Built around the micro:bit ecosystem, it brings together a mobile rover chassis, onboard sensors, lighting effects and expansion ports for building intelligent vehicle pr...
micro:Maqueen Plus V2 (18650) with micro:Maqueen Mechanic
Designed for classroom robotics and STEAM projects, this kit combines the micro:Maqueen Plus V2 18650 robot base with the micro:Maqueen Mechanic add-on set for forklift, push, beetle and loader builds.Maqueen Plus V2 builds on the Maqueen series with a larger body, more expansion ports, a higher-...
micro:Maqueen Plus V2 (18650) with Mechanic, micro:bit V2 and Gamepad
This DFRobot bundle brings together the Maqueen Plus V2 18650 vehicle body with the micro:Maqueen Mechanic set, micro:bit V2 boards and a micro: Gamepad for a more complete classroom or maker robotics setup.Maqueen Plus V2 is a STEAM educational robot built for primary and secondary students, aft...
MI:pro Mountable Case for micro:bit V1/V2
·
This compact MI:pro case protects a BBC micro:bit while keeping it portable and easy to build into projects. It is designed for both the original micro:bit V1 and the micro:bit V2, with a clear three-layer construction that helps prevent accidental shorts on the pads on the back of the board.The ...
MI:pro Protector Case for micro:bit V1/V2
·
This protective case is designed for the BBC micro:bit and works with both the original micro:bit V1 and the micro:bit V2. Its four-layer construction surrounds the board while keeping the important buttons, ports and bottom edge pins accessible.The case helps protect the micro:bit and, important...
AA Boost Module V2
A boost converter module that takes two AA batteries and outputs a stable 5 V supply for your circuits. Built around the TI TPS61032 boost chip, it accepts input voltages from 1.8–4.5 V and delivers up to 5 V @ 1 A — enough to power Arduino boards, sensors, and controllers directly from standard ...
XBee USB Adapter V2 - Atmega8U2
The XBee USB Adapter V2 is an update version from DFRobot. It features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno. The Atmega8U2 firmware uses the standard USB COM drivers, and no external driver is needed. However, on Windows, a .inf file ...
Micro:bit Explorer's Kit without Micro:bit v2
The Little Bird Micro:bit Explorer's Kit includes more than 24 tutorials that teach you both how to use the micro:bit with various sensors and electronics with real-world applications. Access to the tutorials are available on our website for free, forever! There is a speaker and microphone,...
Adafruit ItsyBitsy ESP32 w.FL Antenna - 8 MB Flash / 2 MB PSRAM
·
This compact ItsyBitsy board packs an ESP32 PICO module into Adafruit’s small-format microcontroller layout, with dual-core processing, Wi-Fi, Bluetooth® Classic and BLE, 8 MB of Flash and 2 MB of PSRAM.This version swaps the PCB trace antenna for a w.FL external antenna connector, making it usef...
2.8 TFT Touch Shield for Arduino w/Capacitive Touch
·
The 2.8" TFT Touch Shield with Capacitive Touch plugs directly into an Arduino and provides a bright, full-colour display with a smooth glass capacitive touchscreen and onboard MicroSD card socket. Fully assembled and ready to use — no wiring or soldering required. This shield uses SPI for the d...
