All Products

SKU: DF-SEN0676 · MPN: SEN0676

This 80GHz millimetre-wave radar module is built for precise, non-contact liquid level detection. Using Frequency Modulated Continuous Wave (FMCW) radar, it measures from above the liquid surface, making it suitable for corrosive, hazardous or high-purity liquids where contact probes are not idea...

SKU: DF-SEN0677 · MPN: SEN0677

This standalone vision module combines face recognition, palm vein recognition and QR code decoding in one compact sensor. It uses dual colour and infrared cameras with onboard AI processing, so recognition happens locally without needing cloud access or host-side computation.The binocular RGB + ...

SKU: DF-SEN0681 · MPN: SEN0681

This sensor is designed for monitoring dissolved oxygen in seawater and other high-salinity applications. It uses fluorescence quenching rather than a traditional electrochemical cell, so it does not consume oxygen during measurement and does not require electrolyte replacement.The probe measures...

SKU: DF-SEN0704 · MPN: SEN0704

This flexible thin-film array gives robots, wearables and HCI projects a compact way to sense where pressure is being applied. It integrates 36 independent sensing points into a 15 x 15mm active area, enabling real-time pressure distribution mapping instead of a single force reading.The bendable ...

SKU: DF-SEN0710 · MPN: SEN0710

Designed for industrial water-quality monitoring, this turbidity probe measures suspended particles using the 90° light scattering principle. The probe and housing are integrated into a compact IP68 unit, so it can be submerged for extended periods in applications such as drinking water treatment...

SKU: DF-SEN0711 · MPN: SEN0711

Built for submerged water monitoring, this industrial-grade probe measures ammonia nitrogen concentration in water, including free ammonia (NH3) and ammonium ions (NH4+). It combines the probe and housing into an integrated design for a simpler, more robust installation.The sensor communicates ov...

SKU: DF-SEN0713 · MPN: SEN0713

This industrial-grade chlorophyll sensor measures chlorophyll concentration in water using the fluorescence principle, making it useful for algae monitoring in rivers, lakes, ponds, aquaculture systems and field research sites.The probe and housing are integrated into a single waterproof unit, wi...

SKU: DF-SEN0715 · MPN: SEN0715

This compact capacitive sensor detects the presence or level of liquid through non-metallic container walls, so it does not need to touch the liquid. That helps avoid corrosion, contamination and media adhesion when monitoring aggressive liquids such as strong acids, alkalis and toxic liquids in ...

SKU: DF-SEN0716 · MPN: SEN0716

This industrial non-contact liquid level sensor uses capacitive sensing to detect liquid through non-metallic container walls, so it does not need to touch corrosive, viscous or contaminated liquids. It is suited to liquids such as milk, honey, latex, blood, engine oil and acid or alkaline soluti...

SKU: DF-SER0057 · MPN: SER0057

This clutch servo is designed for robots, models and other mechanisms where the servo may be pushed, stalled or forced out of position during use. Its clutch function helps protect the servo by allowing it to reset and keep working after the angle is changed by an external force.Electronic protec...

SKU: DF-DRI0057 · MPN: DRI0057

This compact motion control board is designed to coordinate ST and SC series serial bus servos in robotics projects, with support for up to 253 servos on a single bus network. It combines power distribution, command transmission and telemetry feedback for multi-axis builds such as robotic arms, w...

SKU: DF-DFR0535-1 · MPN: DFR0535-1

Build a compact off-grid power supply for embedded electronics, IoT nodes and low-power projects with this solar power management kit from DFRobot. It combines a Solar Power Manager board for 9V/12V/18V panels with a compact 9V 220mA solar panel.The controller integrates constant-voltage MPPT sol...

SKU: DF-SER0070 · MPN: SER0070

The ST3215 is an intelligent serial bus servo for robotics and automation projects that need strong torque, position feedback and tidy wiring. It runs from a rated 12V supply and delivers 30kg.cm stall torque through a coreless motor and metal gear train.A 12-bit magnetic encoder provides 360° ab...

SKU: DF-SEN0646 · MPN: SEN0646

This ultra-compact dToF laser ranging sensor uses 940nm laser pulses to measure distance up to 7.8 metres with typical ±4cm accuracy. It is designed for precise, real-time ranging in compact robotics, drone, IoT and automation projects.The module supports UART, I2C and IO communication, making it...

SKU: DF-SEN0657 · MPN: SEN0657

This all-in-one weather station sensor brings seven key environmental measurements into a single outdoor unit: wind speed and direction, temperature, humidity, atmospheric pressure, light intensity and rainfall.It uses ultrasonic wind sensing, so there are no moving parts in the wind sensor, and ...

SKU: DF-SEN0684 · MPN: SEN0684

This graphene-based circular flex force sensor is built for pressure and touch sensing in tougher environments than standard FSR-style sensors. It detects force across a 20g to 6kg range, with resistance changing linearly as pressure is applied for easier interpretation in control systems.The thi...

SKU: DF-FIT0507-EN · MPN: FIT0507-EN

This compact digital thermometer gives you a simple, low-cost way to monitor temperature in wet or enclosed environments. It has an integrated display and a 1 m probe cable, making it handy for greenhouses, fish tanks, swimming pools, fridges, vehicles and indoor temperature checks.The probe is w...

SKU: AF-386

The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing t...

SKU: LB-DHT11-SENSOR

The Little Bird DHT11 Temperature and Humidity Sensor Module provides calibrated digital temperature and humidity readings from a single sensor. Designed and made in Sydney, Australia, it requires no extra components — just connect the included cable and start measuring. The module operates at 3...

SKU: LB-LR0298

This stand alone DHT11 can read the temperature and humidity and send the information over a one wire, simplex serial bus. Arduino.cc provides a DHT11 library to aid in communicating with this module.**DHT11 Temperature and humidty sensor. Pinout:**- Ground- Not Used- Data- Vcc**Specifications...