Sensors & Input

SKU: DF-FIT0759 | Brand: DFRobot

These Inductive Ring Proximity sensors are designed to detect metal objects entering or passing through the ring. They operate on a 6-36V power supply and offer NPN output. The sensor features less than 1ms response t...

SKU: EC-ESP11002R | Brand: Elecrow

A WiFi-controlled relay module designed for ESP-01 or ESP-01S modules (based on the ESP8266). The relay is controlled via GPIO0 with a low-level trigger, allowing you to switch mains-powered devices on and off wireles...

SKU: DF-SEN0347 | Brand: DFRobot

This infrared photoelectric switch consists of a transmitter and receiver pair that detects objects at distances up to 1.5 m with a response time under 1 ms. The infrared beam provides stable detection regardless of a...

SKU: AF-1733 | Brand: Adafruit

A rugged anemometer designed for outdoor wind speed measurement with a simple analog voltage output. Connect it to any microcontroller's analog input for easy wind speed readings — no complex protocols or libraries re...

SKU: SF-COM-11102 | Brand: SparkFun

This 1024 pulse per rotation rotary encoder outputs gray code which you can interpret using a microcontroller and find out which direction the shaft is turning and by how much. This allows you to add feedback to motor...

SKU: DF-SEN0713 | Brand: DFRobot

This industrial-grade chlorophyll sensor measures chlorophyll concentration in water using the fluorescence principle, making it useful for algae monitoring in rivers, lakes, ponds, aquaculture systems and field resea...

SKU: EC-SSE01209P | Brand: Elecrow

This is a high-precision temperature control module, it can not only show the temperature, but also according to the current temperature of the relay control, it can control some of the power equipment through the ...

SKU: PL-2482 | Brand: Pololu

The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB with a soldered-in 1...

SKU: EF-EF03010 | Brand: ElecFreaks

An 8-channel relay module compatible with Arduino, Raspberry Pi, and other MCU boards (PIC, ARM, MSP430). Each relay channel has an LED indicator showing its output state, making it easy to monitor which relays are ac...

SKU: DF-SEN0576 | Brand: DFRobot

The LakiBeam 1S is an industrial-grade 2D single-line pulsed Time-of-Flight (ToF) LiDAR with a 270° scanning range and up to 15 m detection distance. With 2 cm precision, an 18,000 samples/second rate, and 100K LUX st...

SKU: DF-FIT0764 | Brand: DFRobot

These Inductive Ring Proximity sensors are designed to detect metal objects entering or passing through the ring. They operate on a 6-36V power supply and offer NPN output. The sensor features less than 1ms response t...

SKU: DF-FIT0761 | Brand: DFRobot

These Inductive Ring Proximity sensors are designed to detect metal objects entering or passing through the ring. They operate on a 6-36V power supply and offer NPN output. The sensor features less than 1ms response t...

SKU: DF-FIT0763 | Brand: DFRobot

This inductive ring proximity sensor detects metal objects as they enter or pass through a 22 mm ring opening. Operating on a 6–36 V supply with NPN normally-open output, it delivers a sub-1 ms response time — fast en...

SKU: DF-FIT0760 | Brand: DFRobot

These Inductive Ring Proximity sensors are designed to detect metal objects entering or passing through the ring. They operate on a 6-36V power supply and offer NPN output. The sensor features less than 1ms response t...

SKU: DF-FIT0757 | Brand: DFRobot

These Inductive Ring Proximity sensors are designed to detect metal objects entering or passing through the ring. They operate on a 6-36V power supply and offer NPN output. The sensor features less than 1ms response t...

SKU: DF-FIT0758 | Brand: DFRobot

These Inductive Ring Proximity sensors are designed to detect metal objects entering or passing through the ring. They operate on a 6-36V power supply and offer NPN output. The sensor features less than 1ms response t...

SKU: EF-EF03004 | Brand: ElecFreaks

The 2-Channel 12V Relay Module allows you to control two high-power devices independently using low-voltage signals from a microcontroller such as Arduino. Each channel features an optocoupler-isolated relay with norm...

SKU: EF-EF10030 | Brand: ElecFreaks

A passive infrared (PIR) motion sensor module based on the BISS0001 IC, capable of detecting human movement at up to 7 metres. Outputs a digital high signal when motion is detected, making it easy to interface with Ar...

SKU: M5-U067 | Brand: Little Bird

Description RS485-HAT is a TTL to RS485 converter for M5StickC. Among M5stack products we have 5 items that include TTL to RS485, they are RS485 unit, RS485 HAT, PLC, LAN, BASE26 they have different input volt...