Sensors & Input
Explore our extensive range of sensor modules and input devices, stocked locally for fast delivery across Australia. Whether you're building a weather station, robot, or smart home project, you'll find temperature, humidity, gas, motion, distance, pressure, and biometric sensors to suit any application.
Perfect for Arduino and Raspberry Pi makers, STEM students, and professional developers alike. From IMUs and GPS modules to NFC readers and data loggers, everything you need to add real-world sensing to your next project is right here.
HRXL-MaxSonar-WRST7(MB7374)
SKU: DF-SEN0272 | Brand: DFRobot
The weather resistant MB7374 HRXL-MaxSonar-WRST7 has millimeter resolution and a 6Hz read rate, and provides short to long distance detection and range information from 500mm to 5000mm for the nearest detectable targe...
Out of stock
TF Mini Plus(ToF) Laser Range Sensor
SKU: DF-SEN0309 | Brand: DFRobot
TFmini Plus is a great improvement over the original TFmini. It is a small single-point ranging sensor with unique optical and electrical algorithms, which can realize accurate and quick distance measurement as well a...
Out of stock
COMMU Module Extend RS485/TTL CAN/I2C Port
SKU: M5-M011 | Brand: Little Bird
Description COMMU is a Muti-Communication-Interface-Converter. Integrated with 2IIC, 1TTL, 1CAN, 1RS485. Apparently COMMU has packed with most of series communications. Default connection: TTL - UART0, RS485 -...
Out of stock
ESP32 GREY Development Kit with 9Axis Sensor
SKU: M5-K002 | Brand: Little Bird
Description M5Stack GRAY Kit is from one of the M5Stack development kit series, it’s a upgrade from the Basic kits. In comparison, Gray kit provide a extra IMU sensor, MPU6886+BMM150. With a IMU posture sensor...
Out of stock
Code Scanner V3.0 Barcode Scan Recognition Module Serial Communication Uart Interface Usb Keyboard Input
SKU: LB-LS1754 | Brand: Little Bird
Easy to operate, no need to understand complex image recognition algorithmsSupport for reading of common one-dimensional codes and two-dimensional codes such as Barcode and QROnboard Micro- USB and UART serial port fo...
Out of stock
SCXL-MaxSonar-WRLT (MB7586)
SKU: DF-SEN0277 | Brand: DFRobot
The MB7586 SCXL-MaxSonar-WRLT is a long-range, weather-resistant ultrasonic distance sensor with millimetre resolution. It detects the nearest target from 500 mm to 9,999 mm (approximately 10 metres) and provides outp...
Out of stock
SparkFun GPS Breakout - Chip Antenna, SAM-M8Q (Qwiic)
SKU: SF-GPS-15210 | Brand: SparkFun
The SparkFun SAM-M8Q GPS Breakout features a u-blox SAM-M8Q 72-channel GNSS receiver with a built-in chip antenna. It supports GPS, GLONASS, Galileo, and BeiDou constellations simultaneously, providing improved positi...
Out of stock
SparkFun GPS Breakout - ZOE-M8Q (Qwiic)
SKU: SF-GPS-15193 | Brand: SparkFun
The SparkFun ZOE-M8Q GPS Breakout is a miniaturised, high-accuracy GNSS receiver board with Qwiic (I2C) connectivity. The u-blox ZOE-M8Q is a 72-channel receiver that tracks GPS, GLONASS, BeiDou, and Galileo constella...
Out of stock
RPLIDAR A3 - 360 Degree Laser Scanner Development Kit
SKU: DF-DFR0583 | Brand: DFRobot
FEATURES APPLICATIONS Obstacle Avoidance Autonomous Mapping Route Planning Navigation SPECIFICATION Model: RPLDIAR-A3 Distance Range: 0.15 - 25 m Angula...
Out of stock
Pycom Pytrack - GPS+motion shield for WiPy, SiPy, and LoPy
SKU: PI-PYC007 | Brand: Pimoroni
The Pycom Pytrack is a GPS and motion sensor shield compatible with Pycom multi-network modules including the WiPy, SiPy, and LoPy. It provides accurate GNSS positioning, a 3-axis accelerometer, USB serial access, LiP...
Out of stock
MDBT42Q Breakout
SKU: PI-ESP004 | Brand: Pimoroni
This board has the same Bluetooth LE module that used on Puck.js and Pixl.js, pre-programmed with Espruino. Just apply power, connect with Bluetooth LE or Serial and start writing JavaScript! This is a boar...
Out of stock
GPS Receiver for Arduino (Model A)
SKU: DF-TEL0083-A | Brand: DFRobot
This GPS Receiver is Discontinued Now, We recommend other best selling GPS Sensor as a suitable replacement. GPS receivers can be easily found in daily life, such as smartphones, cars, and tablets. T...
Out of stock
SparkFun OpenScale
SKU: SF-SEN-13261 | Brand: SparkFun
The SparkFun OpenScale is an open-source weight measurement board designed for load cells. Simply connect a four-wire or five-wire load cell of any capacity, plug into USB, open a serial terminal at 9,600 bps, and you...
Out of stock
SparkFun RFID Starter Kit
SKU: SF-KIT-13198 | Brand: SparkFun
This it the SparkFun RFID Starter Kit, an all-in-one kit that offer everything you need to get your next RFID project off the ground. This kit includes our USB RFID Reader, ID-12LA RFID module, and two 125kHz RFID car...
Out of stock
SparkFun IR Thermometer Evaluation Board - MLX90614
SKU: SF-SEN-10740 | Brand: SparkFun
An evaluation board for the MLX90614 non-contact infrared thermometer sensor. It pairs the MLX90614 with an ATmega328 running at 3.3 V (8 MHz Arduino bootloader), giving you a ready-to-use IR temperature sensor with s...
Out of stock
Leddar M16 Sensor Module (45 degree beam)
SKU: DF-SEN0200 | Brand: DFRobot
INTRODUCTION The Leddar M16 Sensor Module is an advanced sensing solution that combines 16 independent active elements into a single sensor, resulting in rapid, continuous and accurate de...
Out of stock
Leddar M16 Sensor Module (95 degree beam)
SKU: DF-SEN0201 | Brand: DFRobot
INTRODUCTION The Leddar M16 Sensor Module is an advanced sensing solution that combines 16 independent active elements into a single sensor, resulting in rapid, continuous and accurate de...
Out of stock
URM07-UART Low-Power Consumption Ultrasonic Sensor (20~750cm)
SKU: DF-SEN0153 | Brand: DFRobot
The URM07 is an ultra-low-power UART ultrasonic distance sensor with an effective range of 20–750 cm. Operating on 3.0–5.5 V, it is directly compatible with 3.3 V and 5 V microcontrollers including Arduino and Raspber...
Out of stock
u-blox ZED-X20P Allband GNSS RTK Breakout (Qwiic)
SKU: SF-GPS-28871 | Brand: SparkFun
This GNSS RTK breakout brings the u-blox X20 engine to a maker-friendly board for high-precision positioning projects. It is designed around the ZED-X20P all-band receiver and can process signals from GPS, Galileo, Be...
Out of stock
DAN-F10N Dual-Band L1/L5 GNSS Breakout
SKU: SF-GPS-28435 | Brand: SparkFun
Built around the u-blox F10 engine, this GNSS breakout receives L1 and L5 frequency bands simultaneously for reliable metre-level positioning, even in challenging environments such as dense urban canyons. u-blox multi...
Out of stock
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared