Robotics

SKU: PL-2267 | Brand: Pololu

A NEMA 17 hybrid bipolar stepper motor with a 1.8° step angle (200 steps per revolution). Each phase draws 1.7 A at 2.8 V, delivering a holding torque of 3.7 kg·cm. Four colour-coded wires with bare leads connect to t...

SKU: DF-SER0035 | Brand: DFRobot

This is the most powerful standard servo sized motor from DFRobot so far. The DF15RSMG equips with two pairs of the servo shells. One is a stardard shell with four M4 mounting holes. And the other one includes a shel...

SKU: SF-ROB-11887 | Brand: SparkFun

The Hitec HS-85MG packs impressive torque into a micro-sized package. With metal gears and a single ball bearing, this servo delivers up to 3.4 kg·cm (48.6 oz·in) of torque at 6V while weighing just 21.9 g — making it...

SKU: DF-SER0033 | Brand: DFRobot

Herkulex DRS-0201 is state of the art modular smart servos incorporating motor, gear reducer, control circutry and communications capability in one single package. Through metal brush coreless DC motor, it can...

SKU: SF-ROB-11884 | Brand: SparkFun

This is the classic Hitec HS-422 servo. This solid consumer grade servo is able to take in 6 volts and deliver 57 oz-in. of maximum torque at 0.16 sec/60°, this is a simple servo for any beginner project!This high qua...

SKU: PL-1265 | Brand: Pololu

This board has been replaced by the newer MinIMU-9 v2 L3GD20 and LSM303DLHC carrier, which offers improved magnetic sensing resolution, a wider acceleration measurement range, and gyro measurements that are more resis...

SKU: DF-FIT0335 | Brand: DFRobot

This 500 mm Y-cable is typically used to connect two servos to a single servo port on an RC receiver or servo controller. It has a single female JR connector connected to two male JR connectors, which means it is c...

SKU: DF-KIT0044 | Brand: DFRobot

This is a DFRobot designed black rubber wheel kit. The custom-designed kit contains two 136mm rubber tires tested over 6 indoor conditions,packed with shaft couplings, two M8 screws and 2 washers. Designed to fi...

SKU: DF-SEN0164 | Brand: DFRobot

This adjustable infrared sensor features a high-sensitivity photoreflector to perform distance detection function,ranging from 3cm to 50cm. When the infrared light emitted by the emitter gets reflected on a surface...

SKU: DF-DFR0061 | Brand: DFRobot

The Gravity Joystick Module V2 provides two-axis analogue control (X and Y) plus a digital push-button switch. Connect the two analogue outputs and one digital output to your Arduino or other microcontroller for intui...

SKU: DF-ROB0004 | Brand: DFRobot

The HCR (Home Care Robot) Mobile Robot Platform is a two-wheel-drive robot chassis with a three-level structure, designed for building indoor service and research robots. The kit includes two DC motors with integrated...

SKU: DF-FIT0300 | Brand: DFRobot

This is a 2 DOF robot gripper that can be installed with 2 servos so as to control gripper opening and closing with one servo, and steering gear motion control (or rotation) with the other servo. Velocity ra...

SKU: PL-2145 | Brand: Pololu

The HD-1600A analog servo from Power HD is a great general-purpose micro servo at a great price. Servo horns and associated hardware are included.Key specs at 6 V: 0.10 sec/60°, 18 oz-in (1.3 kg-c...

SKU: PL-1125 | Brand: Pololu

A compact, inexpensive brushed DC motor with a 120:1 plastic reduction gearbox, well suited for small robot builds. The motor is rated for 4.5V but runs comfortably in the 3–6V range. The gearbox output shaft is a 3mm...

SKU: PL-1121 | Brand: Pololu

A 120:1 plastic gearmotor with a 90° output shaft — the output is perpendicular to the motor axis, making it a compact choice for small robot designs where side-mounted wheels or mechanisms are needed. The enclosed ge...

SKU: PL-1120 | Brand: Pololu

A 200:1 plastic gearmotor with a 90-degree output shaft, offering a compact and affordable solution for small robot designs. The low-current brushed DC motor is well-suited for use with common motor drivers, and the r...

SKU: DF-ROB0109 | Brand: DFRobot

Sparki is a fully assembled, Arduino-compatible robot designed for learning programming, electronics, and robotics. Based on the Arduino Leonardo, it comes packed with sensors, motors, a display, and wireless connecti...

SKU: AF-167 | Brand: Adafruit

Plastic wheel with a cutout specially designed to allow attachment to our larger continuous rotation servo. Makes it easy to get your robot rolling. Each wheel comes with a rubber tire that is quite sturdy. To...

SKU: PL-1100 | Brand: Pololu

A Pololu micro metal gearmotor with a 5:1 gear ratio and low-power (LP) 6V motor. The LP motor variant uses precious metal brushes and draws the least current of the micro metal gearmotor family, making it well-suited...

SKU: SF-SEN-13582 | Brand: SparkFun

The SparkFun Line Follower Array is a long board consisting of eight IR sensors that have been configured to read as digital bits! We have designed the SparkFun Line Follower Arrays to follow a dark line of about ¾ in...