Rainbow HAT has a buffet of sensors, inputs and displays to explore Android ThingsTM. Use it as a weather station, a clock, a timer or stopwatch...
View full details
Support and protect your PiTFT+ and Raspberry Pi with this stylish and unique case! Features Compatible with Raspberry Pi 3 B+, 3, & 2, but...
View full details
These displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x32 ind...
View full details
These displays are small, only about 1.3" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x64 i...
View full details
Design a clock, timer or counter into your next project using our pretty 4-digit seven-segment display. These bright crisp displays are good for...
View full details
An unashamedly old school LED matrix display board, made up of six LED matrices each 5x7 pixels (for an effective display area of 30x7) plus a deci...
View full details
This handy Three Wire Display Stand is made for Raspberry Pi, but also can adapt to other tablet PC, such as iPad. It is great for general elect...
View full details
These displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x64 ind...
View full details
The Lite-On LTP-305 LED matrices have quite a heritage! They were first developed in 1971 by Texas Instruments, but subsequently have been manufact...
View full details
This is the lovely little 16 x 3 character LCD we use on Display-O-Tron.A super-slim alternative to the classic industrial character displays. This...
View full details
Comes with a built-in 16 character by 2 line LCD display with backlight, this six push button keypad allows you to create a user friendly interfa...
View full detailsThe 96x96 resolution SHARP Memory LCD is no longer made, but we have a higher-resolution 168x144 display available in the shop at https://www.ad...
View full details
This VGA Shield V2.0 Expansion Board For Raspberry Pi means you can have VGA interface via GPIO and still have access to the HDMI connector. How to...
View full details
Description Bring a little bit of Times Square into your home with this sweet 32 x 32 square RGB LED matrix panel. These panels are normally u...
View full details
The Raspberry Pi Display Adapter is a simple Raspberry Pi adapter designed to provide a convenient interface to attach 4D Systems display modules t...
View full detailsLED Matrix with Bright-Red and Bright-Green LEDs. This medium matrix has 64 Red/Green LEDs built into one common cathode housing. Unit comes with...
View full detailsThis is a fully assembled simple breakout board for the surface mount 3-way switch. These switches are commonly found on handheld devices like MP3 ...
View full details
Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is a ni...
View full details
Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is a ni...
View full details
The cute PiTFT got even more adorable with this little primary display for Raspberry Pi in HAT form! It features a 2.2" display with 320x240 ...
View full details
A TFT panel connected to a Raspberry Pi without the use of an HDMI decoder? What is this sorcery??? It's the DPI Kippah from Adafruit! This HAT-...
View full details
So you have a Teensy and a RGB LED Matrix Panel and you want an easy way to add graphics to your matrix without having to toss aside your Teensy...
View full details
This is the breakout board for the thumb joystick. Pins are broken out to a 0.1" header and includes 4 mounting holes in the corners.
A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 ...
View full details
This kit contains all the components you need to start Arduino, Raspberry Pi. It has more than 200 pcs components, comes with a precision potent...
View full detailsThis LED Christmas Tree is a great kit to learn to solder. It uses through hole components for ease of construction and everything is clearly la...
View full details
This package includes 50 5mm LEDs, 5 different colours. Green, red, yellow, blue & white. It is ideal for your Arduino phototype projects o...
View full details
This lean-to-solder Lamp Kit allows you to create a USB light with switch. It can then be used to create your own Lamp design around it. Take adv...
View full details
This learn to solder kit is a fun little project for someone wanting to work on their soldering skills. Follow along with the video and you will...
View full detailsHuge 10mm through-hole LEDs. Mood-light an entire wall! Features: 3.0-3.4VDC Forward Voltage 80mA Forward Current 30 degree viewing angle 16,000-2...
View full detailsIntroducing our bright and eye-catching Yellow 5mm LED Flashing! This round, diffused LED light is perfect for adding a pop of color and excitement...
View full detailsMost common used electronic components pack. Resistor 2.2Ω*10 10Ω* 10 47Ω*10 100Ω*10 680Ω*10 1kΩ*10 10kΩ*10 22kΩ*10 68kΩ*1...
View full detailsCheck out these big 10mm through-hole LEDs! The clear epoxy package causes these LEDs to have a bright glow. Features: Forward Voltage (R/G/B):...
View full details
IntroductionThis is a colorful strip based on WS2812B beads, it can display the color of RGB and support multiple cascade at the same time.Characte...
View full details
We all know that you can never get too many LEDs. Don’t worry, we’ve got you covered. This is a pack of basic red, yellow, blue and green 5mm LEDs ...
View full detailsThe Little Bird Lorikeet is an RGB LED strip 5 programmable LEDs. This Australian made board uses the WS2812B LED (better known as NeoPixels). ...
View full details
These red flexible LED filament bulbs are perfect for creating unique lighting effects. With a length of 130mm, they provide plenty of light while ...
View full details
These are a 5mm IR Transmitter and Receiver pair to build object sensors, colour sensors, line sensors, distance sensors, etc. These sensors are p...
View full details
OMG WATCH OUT! This 100mm diameter arcade button with a 10mm deep plastic base is so massive and inviting it may collapse upon itself and form ...
View full detailsThe 0.96" OLED Display Module offers crisp visuals in a compact package, perfect for microcontroller-based projects. With a 128x64 resolution and a...
View full details
This is an 16x2 LCD display screen with with I2C interface. It is able to display 16x2 characters on 2 lines, white characters on blue backgroun...
View full details
The LCD Keypad Shield is arduino compactible boards,to provide a user-friendly interface that allows users to display what they want to and make...
View full detailsThis 0.96" OLED Screen Module is perfect for your electronics projects. It has four pins: GND, 3.3V, Serial Clock (SCL), and Serial Data (SDA). Th...
View full details
2" LCD Display Module For Pico Embedded ST7789VW Driver, Using SPI Bus Comes with Raspberry Pi Pico C/C++ and MicroPython Demo Size: 2" Reso...
View full details
Strap yourself in, we're launching in T-minus 10 seconds...Destination? A new Class M planet called MACROPAD! M here stands for Microcontroller ...
View full details
This 1.14" LCD Display Module is designed for the Raspberry Pi Pico and features an embedded ST7789 Driver and SPI bus connection. It has a reso...
View full details
13.3inch 2K AMOLED Touch Display, 2560×1440, HDMI/Type-C Display Interface, 100% sRGB and 100% DCI-P3 Color Gamut, Optical Bonding Toughened Glas...
View full details
1.5inch OLED display Module, 128x128 pixels, 16 gray scale, SPI/I2C interface Overview This is a general OLED display Module, 1.5inch diagonal, ...
View full detailsThis 5 inch HDMI TFT LCD touch screen is specially designed for Raspberry Pi and is compatible with the Raspberry Pi 4 Features: 800×480 reso...
View full details
Triple LCD HAT For Raspberry Pi, Onboard 1.3inch IPS LCD Main Screen and Dual 0.96inch IPS LCD Secondary Screens, With 40PIN GPIO Header, Compat...
View full details
1.5inch OLED Display Module, 128×128 Resolution, SPI / I2C Communication, Black / White Display Color 1.5in...
View full details
This is a 20x4 Arduino compatible LCD display module with high speed I2C interface. It is able to display 20x4 characters on two lines, white ch...
View full details
1.8inch LCD Display Module for Raspberry Pi Pico, 65K RGB Colors, 160×128 pixels, SPI Interface 1.8" LCD Display Module for Pico embedded ST7735...
View full detailsThis is the Little Bird Electronics 7" LCD HDMI Touch Screen for Raspberry Pi It has 800 x 480 HD resolution and Capacitive touch control. It sup...
View full details
This is a 5-inch HDMI-Compatible capacitive touch monitor with 800*480 resolution.It has a headphone port and speaker interface, users can choose t...
View full details
3.5" Touch Display for Raspberry Pi Size: 3.5" Resolution: 480×320 Display Interface: SPI Panel Type: IPS Viewing Angle: 160° To...
View full details
The 7” Touchscreen Monitor for Raspberry Pi gives users the ability to create all-in-one, integrated projects such as tablets, infotainment syst...
View full details
13.3inch 2K AMOLED Touch Display, 2560×1440, HDMI/Type-C Display Interface, 100% sRGB and 100% DCI-P3 Color Gamut, Optical Bonding Toughened Glas...
View full details
10.1inch Capacitive Touch Display, Optical Bonding Toughened Glass Panel, 1280×800, IPS, HDMI Interface 10.1″ Touch Display HD Resolution | Mul...
View full detailsThis 5 inch HDMI TFT LCD touch screen is specially designed for Raspberry Pi and is compatible with the Raspberry Pi 4 Features: 800×480 reso...
View full details
10.1inch Capacitive Touch Display, Wide Color Gamut, 1280×800, Optical Bonding Toughened Glass Panel, HDMI/Type-C Display Interface, 10-Point To...
View full detailsA high-resolution, high-speed 4.0" TFT display for your Raspberry Pi with optional capacitive multi-touch! HyperPixel 4.0 is the perfect way to ...
View full details
This 3.5" display features a resolution of 480 x 320 and a frame rate of 60 FPS or higher. Equipped with an HDMI interface, it's compatible with no...
View full details
8inch Capacitive Touch Display, Wide Color Gamut, 1280×800, Optical Bonding Toughened Glass Panel, HDMI/Type-C Display Interface, 10-Point Touch...
View full detailsIntroducing the TTGO T-Watch-2020, a cutting-edge wearable device that seamlessly combines technology and style. Powered by the ESP32 main chi...
View full detailsThis is the Little Bird Electronics 7" LCD HDMI Touch Screen for Raspberry Pi It has 800 x 480 HD resolution and Capacitive touch control. It sup...
View full details
CrowPanel ESP32 Display 2.8-inch SPI module is a powerful HMI touch screen with a 320*240 resolution LCD display. It uses the ESP32-WROOM-32 module...
View full details
This 10.1 inch portable monitor supports 1920x1080 resolution max, the image is colorful and crystal clear. IPS LED technology brings a subversive ...
View full details
The 2.4 inch TFT Touch Screen Module with micro SD card slot is now available as a SHIELD for Arduino UNO. It has a four wire resistive touch sc...
View full detailsNOTE: These devices are not recommended for the PI5 which uses USB-C PD to supply more power than a PI4This device is perfect for turning on and o...
View full detailsThis battery enclosure (with switch) for the BBC micro:bit is the perfect way to power your micro:bit on the go. Specifications: 2x AAA Batter...
View full details
We use these little buttons on everything! These Miniature Single Pole Single Throw switches have a good click to them and are breadboard friend...
View full details
The rocker switch is a classic and this one is a great size for an unobtrusive on/off switch.It can be panel mounted and has two tabs for connectin...
View full details
Medium-sized clicky momentary switches are standard input "buttons" on electronic projects. These work best in a PCB but can be used on a solder...
View full details2N2222A NPN Transistor Specifications Type of Transformer BJT Transistor Package TO-92 Transistor Polarity NPN Power Dissipation at 25°...
View full details
These nice switches are perfect for use with breadboard and perfboard projects. They have 0.1" spacing and snap in nicely into a solderless brea...
View full details
This microUSB extender has a female microUSB at one and and male microUSB at the other end. You can use the inline switch to power on or off your ...
View full detailsWe use these little buttons on everything! These Miniature Single Pole Single Throw switches have a good click to them and are breadboard friend...
View full details
OMG WATCH OUT! This 100mm diameter arcade button with a 10mm deep plastic base is so massive and inviting it may collapse upon itself and form ...
View full detailsThis single-pole, double-throw (SPDT) rocker switch makes a great on/off power switch. It is rated for 10 A at 125 VAC and 6 A at 250 VAC.
This or that, one or the other, perhaps or perhaps not! So hard to make decisions these days without feeling like you're just going back and ...
View full details
This is a panel mount pushbutton. It has a nice dome shaped button that has a smooth momentary feel.The button is normally open, when pressed the c...
View full detailsBAM! This 60mm diameter arcade button is large and inviting and ready for all sorts of pressing and pushing. We've seen these on some games of skil...
View full details
It’s the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes wi...
View full details
This kit contains all the components you need to start Arduino, Raspberry Pi. It has more than 200 pcs components, comes with a precision potent...
View full detailsComes as a standard 10K ohm linear potentiometer with 0.1" spacing it works great for prototyping. It has a nice feel, tweaking it is quite satisf...
View full details
This potentiometer is a two-in-one, good in a breadboard or with a panel. It's a fairly standard linear taper 10K ohm potentiometer, with a grip...
View full details
An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, ...
View full details
KCD4 Rocker Switch ON-OFF 2 Position 4 Pins 16A 250VAC
The knob is designed to set directly on the potentiometer's ridges so it's an easy & secure fit. It has a nice feel, with a solid grip, twea...
View full details
The DFRobot 360 degree rotary encoder module is based and designed on the EC11 rotary encoder button. The module has three signal terminals: te...
View full details
This Panel Mount 10K Dual Linear Potentiometer w/ On-Off Switch is a two-in-one, you get a dual-ganged potentiometer and an on-off switch. For t...
View full detailsThere are lots of trimpots out there. Some are very large, some so small they require a screwdriver. Here at Little Bird, we just needed a simple o...
View full details
The 50K Potentiometer is an essential component for adjusting resistance in your electronic projects. With a linear response curve (T...
View full details
The knob is designed to set directly on the potentiometer's ridges so it's an easy & secure fit. It has a nice feel, with a rubbery grip, tw...
View full details
A switch is a switch, and an LED is an LED, but this LED illuminated button is a lovely combination of both! It's a medium sized button, large enou...
View full details
This is a 12-step rotary encoder with a nice ‘clicking’ feel. It’s breadboard friendly, and has a pretty handy select switch (by pushing in on t...
View full details
These are our favorite trim pots, perfect for breadboarding and prototyping. They have a long grippy adjustment knob and with 0.1" spacing, they...
View full details
These compact and luxurious machined knobs look fantastic and have a nice feel, a perfect way to upgrade your rotary encoder or potentiometer. We h...
View full details
