All Products
AI Overview
“Little bird board” is a broad match in the catalogue—these are the most relevant Little Bird branded boards by use-case:
Microcontroller / programmable boards
- Uno R3 - Little Bird ($19.55) — Arduino Uno R3 compatible development board (shield-compatible layout).
- Little Bird Finch Board ATTiny85 ($7.80) — ATtiny85 tiny programmable board aimed at e-textiles / wearables.
- Little Bird Finch Board ATTiny85 x 5 ($36.05) — 5-pack of the Finch boards for classes/workshops.
- EagLED - Little Bird E-Textile Snapable Board ($27.20) — Arduino-compatible wearable board with LEDs, light sensor, push button, and battery holder.
- EagLED - Little Bird E-Textile Snippable Board with Buzzer ($34.35) — similar wearable board but snippable and includes a buzzer.
LED “boards” (add addressable RGB lighting)
- Little Bird Lorikeet WS2812B Rainbow Board ($2.00) — 5× WS2812B (NeoPixel-compatible) addressable LEDs.
- Little Bird Lorikeet WS2812B Rainbow Board with Right Angle Header ($3.50) — Lorikeet version with a right-angle header.
- Little Bird Macaw WS2812B Rainbow Board 3 LED ($1.30) — compact 3× WS2812B addressable LED board.
- Little Bird Toucan 8 x APA102 RGB LED ($11.65) — Raspberry Pi add-on with 8× APA102 smart LEDs.
Breakout / interface boards
- Little Bird Breakout Nest for Raspberry Pi ($26.35) — Raspberry Pi GPIO breakout for easier external wiring.
- Little Bird Breakout Board for XBee Module ($0.65) — simple XBee pin breakout to 0.1" headers.
Specialty input board
- ShakeUp Board Only ($38.60) — USB board that appears as a keyboard/mouse and lets you trigger inputs using alligator clips.
Which type of “Little Bird board” are you after?
Collections
Showing 1381-1400 of 1715 products
IR Remote Control Kit For Arduino
A compact infrared wireless remote control kit for Arduino projects. The kit includes an ultra-thin 20-key IR remote and a 38 kHz IR receiver module, providing a simple way to add wireless control to robots, interactive displays, and other Arduino-based builds. The IR receiver module decodes sta...
Yahboom Micro:bit camera platform
This camera platform mainly consists of two 180-degree servos, a WIFI camera, and an acrylic platform holder. As long as you have the ability to drive two 5v servos and a WIFI camera serial port, you can use this camera platform. It is a DIY product that supports a variety of expansion boards or ...
Raspberry Pi 3 Case Aluminum Case
This Little Bird Aluminum Case is a silver coloured, hard and sturdy protective case with a matt finish, designed for the Raspberry Pi 3!It's not just easy-to-assemble, but also has plenty of air holes for ventilation and to keep the Raspberry Pi cool.
Gesture recognition sensor module
A gesture recognition sensor module capable of detecting nine distinct hand gestures including directional swipes, rotation, and waving. The module communicates via I²C and features both normal and game modes for different gesture speed sensitivities, making it a versatile input device for intera...
Arduino Mega 2560 Enclosure -Blue
A blue ABS enclosure designed specifically for the Arduino Mega 2560 board. This snap-fit case provides protection for your board while allowing access to all ports and connectors. Key Features Custom Fit – Designed specifically for the Arduino Mega 2560 ABS Construction – Durable acrylonitri...
Scroll Bot - Pi Zero W Project Kit
Scroll Bot is a desk-friendly robot kit built around the Raspberry Pi Zero W and the Scroll pHAT HD LED matrix. Once assembled, it scrolls messages, news, weather, or social media feeds through its 17×7 bright white LED "mouth" — all powered by the Pi Zero W's built-in Wi-Fi. The kit includes ev...
Break-Away Header Pin Snapper Tool
A handy tool for cleanly snapping break-away header pins to the exact length you need. Insert the header strip, align to the numbered markings (1–16 pins), and bend the exposed pins to snap them off. Works with both straight and right-angle headers by flipping the tool over. Key Features 1–16 ...
Raspberry Pi Zero 2 WH Starter Kit
LIMIT 1 per person - if you buy more than 1 they will be refunded less transaction fees.The Raspberry Pi Zero 2 WH Starter Kit has everything you need to get started on your Raspberry Pi Zero 2 project.With coloured headers already soldered on you can get straight into adding Hats or jumper w...
Blue Light Duty Hook-up Wire - 25m
Now everyone can afford to have a roll of each colour hook- up wire by their work bench. Quality 13 x 0.12 tinned hook- up wire on plastic spools. Specifications Wire Category Hook up / power ...
Alligator Clip SMALL - 26MM - Pk.2
A pair of small 26mm alligator clips in red and black — perfect for compact prototyping, testing, and making quick temporary connections where standard-sized clips are too bulky. Specifications Length: 26mm Type: Alligator clip (spring clamp) Colours: 1× red, 1× black Ideal For Compact ci...
Raspberry Pi Arduino Shield Add-on
Overview Compared to Arduino, it's hard to find the shields and electronic brick customized for Raspberry Pi. This RPI Arduino Shield Add-on has extended 32pin connector of RPI to Arduino pins, which will facilitate connections to all kinds of arduino shields. Meanwhile, two groups of elect...
Raspberry Pi 4 Black Case with Fan
This Raspberry Pi 4 with Fan is made from aluminum and has exhaust hole surface for perfect heat dissipation. All ports and slots of the case can match with Raspberry Pi perfectly. Note: Raspberry Pi board is not included.
Wonder Workshop Dot Creativity Kit
Discover the Dot Creativity Kit!Dot is a clever little robot with multiple sensors and a quirky personality that powers the Do-It-Yourself projects in the new Dot Creativity Kit. Kids will learn about robotics and develop fundamental coding and problem-solving skills while having fun. Dot's ...
M5StickC+ Development Kit with Hat
The M5StickC is a compact ESP32-based development board from M5Stack, designed for portable IoT prototyping. Despite its tiny size, it packs a 0.96-inch LCD, 6-axis IMU (MPU6886), microphone, IR transmitter, red LED, and an 80 mAh LiPo battery — all accessible via USB Type-C. This kit includes t...
2:1 3mm Heatshrink Tubing 5m Black
A 5-metre roll of 2:1 ratio heatshrink tubing in black, with a 3 mm pre-shrink diameter. Shrinks to half its original size when heated, providing insulation, strain relief, and protection for solder joints, wire splices, and cable connections. Supplied in a neat box for workshop storage. Shrink ...
20/130W Soldering Iron Starter Kit
A complete soldering starter kit with everything a hobbyist needs to get started. The kit centres around a 240V turbo soldering iron with switchable 20W/130W power, along with a spare tip, solder, desoldering pump, and a basic stand. Key Features 20/130W Turbo Iron – Switchable power for delic...
Maker Essentials - LEDs Resistors
A starter pack of over 50 LEDs in three sizes and five colours, bundled with a selection of through-hole resistors. The current-limiting resistors protect the LEDs and let you control brightness — everything you need to add indicators, status lights, and visual feedback to your projects. Kit Con...
Edison Robot - EdPack1 Meet Edison
There is a new version - available here Meet EdisonThe super affordable, programmable robot. Your stepping stone into the exciting world of science and technology!Why Edison?Have you ever wanted to get into robotics, but found it too difficult or expensive?Meet Edison... Affordable – Less than US...
Mood Light - Pi Zero W Project Kit
A complete project kit for building a modern, internet-connected mood light powered by a Raspberry Pi Zero W and the Unicorn pHAT's 32 programmable RGB NeoPixel LEDs. The pendant-style stand and diffuser cast beautifully soft, colourful light — perfect for a bedside table, bookcase, or desk. Set...
Maker Essentials - Various Headers
If you're going to be adding and removing wires to a project, these 2.54 pitch headers are an ideal way to make it easy and reliable. This box has a useful selection. Maker Essentials are components and useful bits for everyday electronics and tech projects. Kit contains 2x male 2.54mm ...
