All Products
Showing 81-100 of 100 products
Mini Pushbutton Switch - SMD
A miniature surface-mount momentary pushbutton switch with a low-profile design. Ideal for use as a tactile reset button or general-purpose input on custom PCBs. Rated up to 50 mA. Key Features Surface Mount (SMD) – Low-profile for compact PCB designs Momentary Action – Normally open, closes ...
SparkFun RS232 Shifter SMD (No DB9)
A compact RS232-to-TTL level shifter board that converts both TX and RX lines bidirectionally. Powered from your target application's supply voltage, it automatically converts RS232 signals to match — run it at 5 V for 5 V TTL, or at 2.8 V for 2.8 V CMOS TTL levels. Includes TX and RX indicator L...
50 Channel GS406 Helical GPS Receiver - SMD Connector
This is a vertical 10-pin SMD connector designed for use with the GS406 helical GPS receiver module. It provides a surface-mount interface for connecting the GS406 to your custom PCB, enabling access to the module's serial data, power, and control pins. Key Features 10-Pin SMD – Vertical surfa...
Qwiic JST Connector - SMD 4-Pin (Vertical)
A surface-mount 4-pin JST connector in a vertical orientation, designed for the SparkFun Qwiic I2C ecosystem. This 1 mm pitch connector is used on all Qwiic-compatible boards and lets you build your own I2C devices that integrate seamlessly with the Qwiic system. The vertical mount profile is id...
micro:bit Edge Connector - SMD, Right Angle (40-pin)
The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 40, right angle, SMD pins. Add this part to your board to create a handy way to swap out micro:bits for programming, while still providing reliable conn...
JST-SH Horizontal 4-Pin SMD Connector - 1.0mm Pitch
·
This tiny four-pin connector is a compact option when you need a very small board-to-cable connection. It uses the smaller JST-SH style rather than the larger JST connectors commonly found on many breakout boards.The connector has a horizontal orientation and is intended for surface-mount install...
8-Position SMD DIP Switch
·
This compact surface-mount DIP switch provides 8 individual switch positions for adding simple, user-selectable controls to a PCB.Each position is an SPST slide switch, making it suitable for general control switching in embedded projects, configuration inputs, mode selection and similar low-curr...
DotStar Micro LEDs (APA102–2020)- Smart SMD RGB LED - 100 pack
·
These incredibly small surface-mount LEDs are an easy way to add a lot of very tiny (but bright!) colorful dots to your project. They're mini versions of our digital DotStart strips and matrices with full chainable 2-wire control. They are just mind-bogglingly small. They are a mere 2mm x...
Header - 4-pin Male (SMD, 0.1, Right Angle)
A 4-pin right-angle male header for surface-mount applications, with standard 0.1" (2.54 mm) pin spacing. Key Features 4-Pin Male Header – Right-angle, surface mount 0.1" (2.54 mm) Pitch – Standard spacing between pins and rows Package Contents 1× 4-pin right-angle male SMD header Resour...
JST SH Horizontal 6-Pin Connector - SMD
Here is a six pin horizontal 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST type connectors we use on most of our boards, but are actually the much smaller JST-SH type. Check the drawing below. Documents: Drawing
DC Barrel Power Jack/Connector (SMD)
A standard SMD (surface-mount) DC barrel power jack for use with common DC wall adapters. This is the same connector size used on most Arduino boards and many other development platforms. Key Features Surface-Mount (SMD) – Reflow-solderable for custom PCB designs Standard Size – 5.5 mm outer ...
Coin Cell Battery Holder - 12mm (SMD)
This is the SMD version of PRT-07948, which is the unit we like to use as RTC backup and SRAM backup for GPS units. Holds battery in place with friction. The metal housing connects to the positive side of the battery and the PCB pad underneath is connected to the negative side.
Tactile Button - SMD (6mm)
This is an SMD 6mm square SPST button. What we really like is the little button head and good tactile feel (it ‘clicks’ really well). This button is great for user input or a good reset button on a PCB. As this is an SMD component make sure you are well versed in soldering before attempting to in...
Smart SMD Tester
This smart SMD tester is essentially a pair of multimeter tweezers. This allows you to troubleshoot circuits with small SMD parts without having to fumble with large probes or long wires. Test resistors, capacitors and diodes one-handed!Features: Resistance Range: 300Ω/3KΩ/30KΩ/300KΩ ±(1.0%...
Arduino Uno - R3 SMD
This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf fil...
Header - 10-pin Male (SMD, 0.1)
A standard 0.1" (2.54 mm) pitch male header pin strip with 10 pins, designed for surface-mount applications where through-hole pins are not suitable. The SMD legs are staggered for stress relief during soldering. Key Features 10-Pin Male Header – Standard 0.1" (2.54 mm) pitch Surface Mount – ...
USB Mini-B SMD Connector
USB Type ‘Mini-B’ Female SMD connector. This is a 5-pin Mini-B surface mount connector commonly found in MP3 players, media/disk readers, USB hubs, pretty much anything small and USB.
Voltage Regulator - Adjustable LM1117 SMD
This is a 1A Adjustable SOT-223 voltage regulator capable of outputting 1.2V to 18V. The LM1117 uses the same pin-out and setup as the popular LM317 adjustable regulator, contained in a handy surface mount package. Requires two external resistors to function. Documents: FAN1117A.pdf SFE ...
JST SH Vertical 6-Pin Connector - SMD
A 6-pin vertical JST SH connector in a surface-mount (SMD) package. With a 1.0mm pitch, this is a compact connector ideal for space-constrained PCB designs where a small, reliable connection is needed. This is the JST SH type (1.0mm pitch), which is smaller than the standard JST PH (2.0mm) conne...
Triple Output LED RGB - SMD
This is the very popular RGB combo but in SMD form. These units have four pads with a common anode configuration. Use this one LED for three status indicators or pulse width modulate all three and get mixed colors! Simple breakout board available below. Iv (Typical): Red: 81mcd Green: 130mcd B...
