All Products
AI Overview
“Little bird board” is a broad match in the catalogue—these are the most relevant Little Bird branded boards by use-case:
Microcontroller / programmable boards
- Uno R3 - Little Bird ($19.55) — Arduino Uno R3 compatible development board (shield-compatible layout).
- Little Bird Finch Board ATTiny85 ($7.80) — ATtiny85 tiny programmable board aimed at e-textiles / wearables.
- Little Bird Finch Board ATTiny85 x 5 ($36.05) — 5-pack of the Finch boards for classes/workshops.
- EagLED - Little Bird E-Textile Snapable Board ($27.20) — Arduino-compatible wearable board with LEDs, light sensor, push button, and battery holder.
- EagLED - Little Bird E-Textile Snippable Board with Buzzer ($34.35) — similar wearable board but snippable and includes a buzzer.
LED “boards” (add addressable RGB lighting)
- Little Bird Lorikeet WS2812B Rainbow Board ($2.00) — 5× WS2812B (NeoPixel-compatible) addressable LEDs.
- Little Bird Lorikeet WS2812B Rainbow Board with Right Angle Header ($3.50) — Lorikeet version with a right-angle header.
- Little Bird Macaw WS2812B Rainbow Board 3 LED ($1.30) — compact 3× WS2812B addressable LED board.
- Little Bird Toucan 8 x APA102 RGB LED ($11.65) — Raspberry Pi add-on with 8× APA102 smart LEDs.
Breakout / interface boards
- Little Bird Breakout Nest for Raspberry Pi ($26.35) — Raspberry Pi GPIO breakout for easier external wiring.
- Little Bird Breakout Board for XBee Module ($0.65) — simple XBee pin breakout to 0.1" headers.
Specialty input board
- ShakeUp Board Only ($38.60) — USB board that appears as a keyboard/mouse and lets you trigger inputs using alligator clips.
Which type of “Little Bird board” are you after?
Collections
Showing 861-880 of 1715 products
USB C to 3.5mm Audio Headphone Jack - Android Version
USB C to 3.5mm Audio Headphone Jack DAC Adapter OverviewThe USB C to 3.5mm Audio Headphone Jack DAC Adapter is your go-to solution for connecting traditional 3.5mm audio devices to modern USB-C devices without a headphone jack. Whether you're listening to music, taking calls, or using your favori...
Robot Chassis base with 2 wheels with AA-Battery Pack
Looking for a Robot Chassis? Check out our 2 Wheel Robot Chassis. Perfect for adding your own electronics to. It comes with two motors which can be connected to your Arduino, Micro:Bit or Raspberry pi to get your project moving!
Short USB-C to Micro USB data cable 30cm for MicroBit
This short data cable connects a USB-C equipped computer, power bank or other device to a Micro USB device such as a micro:bit.At just 30 cm long, it is handy for classroom kits, maker benches and travel cases where a full-length cable would get in the way.Use it for transferring projects and cod...
Arduino Compatible Lithium Battery USB Charger Module
This compact TP4056-based module charges a single lithium cell from a 5V USB supply. With charge state LEDs and both mini-USB and solder tab inputs, it's an easy way to add rechargeable battery capability to your projects. Pair it with a DC-to-DC boost converter to create a device that runs on a...
10M Ohm 0.25 Watt Carbon Film Resistors - Pack of 500
A bulk pack of 500 × 10MΩ (10 megaohm) carbon film resistors rated at 0.25W (¼W) with 1% tolerance. Ideal for production runs, classroom kits, or stocking up the parts bin. This very high resistance value is commonly used in high-impedance input buffers, electrostatic discharge protection, and le...
KCD4 Rocker Switch ON-OFF 2 Position 4 Pins 16A 250VAC
A KCD4 panel-mount rocker switch with ON/OFF two-position operation and four-pin DPST (double pole, single throw) configuration. Rated for 16 A at 250 V AC, it is suitable for power switching in equipment, appliances, and DIY electronics projects. Specifications Type – KCD4 rocker switch Posi...
Blue 50cm Micro USB cable with Data Line for Micro:bit
This handy blue Micro USB cable includes the data lines needed for connecting compatible boards to a computer, not just charging.At 50cm long, it is a compact choice for use on a desk, in a classroom kit, or with a laptop when programming boards such as the micro:bit and Raspberry Pi Pico.Specifi...
HDMI compatible Adapter Male To Female Right 90 degree
This HDMI right angle adapter is perfect for connecting your HDMI device to your TV or monitor in tight spaces. The 90 degree design ensures a snug fit, while the male to female connectors provide a reliable connection. This adapter is compatible with all HDMI devices, making it a must-have for y...
4K HDMI Capture Card for Streaming Full HD 1080P 60FPS
A USB 3.0 HDMI capture card that records and streams video at up to 1080p at 60 fps, with 4K HDMI passthrough. Connect any HDMI source — camera, game console, computer, or media player — and capture the video output directly to your computer for streaming or recording. The compact aluminium allo...
10DOF Module MPU6050 HMC5883L BMP180 GY87 Sensor Module
The GY-87 is a 10 degrees-of-freedom (10DOF) sensor module that combines three chips on a single compact board: the MPU6050 (3-axis gyroscope + 3-axis accelerometer), HMC5883L (3-axis magnetometer), and BMP180 (barometric pressure sensor). All ten axes of data are accessible over a single I2C bus...
5 inch LCD HDMI Touch Screen Display for Raspberry Pi 3
This 5-inch HDMI TFT LCD touch screen plugs directly onto a Raspberry Pi via the GPIO header and HDMI connector, providing an 800×480 resolution display with SPI-based touch input. It draws power from the Pi's GPIO pins, so no separate power supply is needed. The display connects via HDMI for vi...
5 inch LCD HDMI Touch Screen Display for Raspberry Pi 4
This 5-inch HDMI TFT LCD touch screen is designed for Raspberry Pi 4, plugging directly onto the GPIO header with an HDMI connection for an 800×480 resolution display with SPI-based touch input. It draws power from the Pi's GPIO pins, so no separate power supply is needed. The display uses HDMI ...
Bulk Alligator Test Leads - 10 x 10 Pack (100 in total)
Alligator clips (or Crocodile clips, if you prefer) are likely to be the most useful thing on your workbench besides the workbench itself.This is a bulk pack of 10 lots with 10 in each = 100 in total! Whether you’re just trying to make a few quick connections to test your circuit or having tr...
22 in 1 Smart Cell Mobile Phone Opening Pry Repair Tool
This 22-in-1 repair tool kit provides everything you need to open and disassemble smartphones, tablets, and other small electronics. Whether you're replacing a cracked screen, swapping a battery, or simply exploring what's inside, this kit has the right tools for the job. Key Features 22-Piece...
Micro B USB In-line Power Switch Cable (Female to Male)
This microUSB extender has a female microUSB at one and and male microUSB at the other end. You can use the inline switch to power on or off your device without having to keep unplugging it.This works with the Raspberry Pi MicroUSB power supply that is used for the 3B+ and Zeros. Length: 28...
Five Direction Navigation Button Rocker Joystick Module
Five-Direction Navigation Button Switch — Game On, Maker Style!Ready to level-up your next Arduino or microcontroller project? The Five-Direction Navigation Button Switch Module is your ticket to classic game controls, menu navigation, or anything else that demands precise, tactile feedback. Just...
ABS Black Case Enclosure For Raspberry Pi Zero / Zero W
A lightweight ABS plastic case to protect your Raspberry Pi Zero or Zero W from damage. Simple snap-together design with mounting screws included. Key Features ABS Plastic – Durable and lightweight protection Compatible – Fits Raspberry Pi Zero and Zero W Port Access – Cut-outs for cables an...
USB-C to 3.5mm Audio Headphone Jack - iPhone Compatible
USB C to 3.5mm Audio Headphone Jack DAC AdapterOverviewThe USB C to 3.5mm Audio Headphone Jack DAC Adapter is your go-to solution for connecting traditional 3.5mm audio devices to modern USB-C devices without a headphone jack. Whether you're listening to music, taking calls, or using your favorit...
Learn to Solder - DIY Ultrasonic Ranging Electronic Kit
A DIY soldering kit that builds into a functional ultrasonic distance meter. Using an HC-SR04 ultrasonic sensor, STC89C52 microcontroller, and 3-digit 7-segment display, this kit measures distances from 5cm to 4m with a built-in buzzer alarm when objects get too close. The microcontroller comes ...
