All Products
Showing 4761-4780 of 11445 products
GPIO Terminal Block Breakout Board Module for Raspberry Pi
This terminal block breakout module comes fully assembled and soldered, ready for use with Raspberry Pi boards.It is compatible with Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, and Pi Zero W.The module features 2.54 mm (0.1″) pitch terminal blocks su...
GPRS/GSM + GPS A9G Pudding/SMS/Voice/Wireless Data Transmission + Positioning IOT Development Board
The A9G development board is a compact IoT module combining GPRS/GSM cellular connectivity with GPS/BDS dual-mode positioning. Based on the A9G module, it supports voice calls, SMS, GPRS data networking, and real-time location tracking — all on a single board. Packed with peripherals including a...
GPS Active Antenna (3m Plug Series Connector)
This is a GPS Active Antenna which can make you received the GPS form indoor. Its cable is 3m. It can be used with our GPS Shield to make the GPS Shield can be used in the home or somewhere don't have GPS signal.Specification Frequency: 1575.42MHZ Voltage: 3.0-5.0V Size: 3.9 x 5.0cm Cable Length:...
GPS Antenna - External Active Antenna - 3-5V 28dB 5 Meter SMA
·
Give your Ultimate GPS V3 a boost with this external active antenna. This GPS antenna draws about 10mA and will give you an additional 28 dB of gain. It's got a 5 meter long cable so it will easily reach wherever you need it to. The antenna is magnetic so it will stick to the top of a car or truc...
GPS Antenna Ground Plate
Many magnetic mount GPS antennas rely on being mounted on a car or other large metallic object to provide a good ground plane. But what if you want to use an antenna not on a car? The GPS Antenna Ground Plate is the solution! This plate significantly increases the performance of GPS and GNSS ante...
GPS + BDS BeiDou Dual Module
A compact multi-constellation GNSS positioning module based on the AT6558 chip with 32 tracking channels. It simultaneously receives signals from six satellite navigation systems: GPS, BeiDou, GLONASS, Galileo, QZSS, and SBAS (WAAS, EGNOS, GAGAN, MSAS) for accurate joint positioning. The module ...
GPS External Amplified Ceramic Antenna
·
Enhance your positioning accuracy with our high-performance GPS External Antenna, designed with an integrated amplifier and superior ceramic technology for optimal signal capture and amplification. Suited for a multitude of positioning and navigational applications, this antenna is the perfect ac...
GPS/GNSS Embedded Antenna SMA - 1m
This tri-band GNSS antenna is ideal for GPS L1, GLONASS L1, and Beidou B2 reception. At 45x45mm it is a large ceramic antenna with an incredible 38dB LNA gain.This antenna works well with the GPS-RTK providing reception of Beidou satellites where other more basic GPS antennas cannot. We’ve chosen...
GPS/GNSS Magnetic Mount Antenna SMA - 3m
This GPS/GNSS magnetic mount antenna is designed for multi-constellation reception, supporting both GPS and GLONASS satellite systems. The magnetic base allows easy mounting on any metal surface such as a vehicle roof or ground plate, and the 3 m cable with standard SMA connector provides flexibl...
GPS Module - GP1818MK (56 Channel)
The GP-1818MK is a low-cost - high performance GPS module with built in antenna. It can provide position, velocity, and accurate timing through the standard NMEA-0183 protocol. Being low power and compact in design, the GP-1818MK is perfect for basic tracking and positioning, especially with resp...
GPS Module with Enclosure
You must have used a GPS receiver. It is easy to be found in most places, such as smartphones, cars, and computers. They are used to track your loaction all over the globe. GPS Receiver for Arduino is a unit embedding GPS module and antenna in a small foot-print enclosure. By using TinyGPS li...
GPS Receiver for Arduino (Model A)
This GPS Receiver is Discontinued Now, We recommend other best selling GPS Sensor as a suitable replacement. GPS receivers can be easily found in daily life, such as smartphones, cars, and tablets. They are used to track the loaction all over the globe. This GPS Receiver for A...
GPS Receiver - GP-735 (56 Channel)
The GP-735 is a slim, ultra-high performance, easy to use GPS smart antenna receiver. With -162dBm tracking sensitivity and only 29 second cold start time, the GP735 is a tiny, yet powerful, piece of tech. The slim design makes it ideal for applications where you don’t have a lot of space to work...
GPS-RTK Board - NEO-M8P-2 (Qwiic)
·
Built around the u-blox NEO-M8P-2, this breakout brings high-accuracy GNSS and GPS positioning with RTK support to the Qwiic ecosystem. It’s designed for applications where standard GPS accuracy isn’t enough, with RTK positioning down to 25mm so you can track the location of a device, robot or ve...
GPS-RTK Dead Reckoning Breakout - ZED-F9R (Qwiic)
·
This high-precision GNSS breakout is built around the u-blox ZED-F9R, combining RTK positioning with Automotive Dead Reckoning (ADR) sensor fusion. It fuses a 3D IMU sensor, wheel ticks, a vehicle dynamics model, correction data and GNSS measurements to provide accurate and continuous positioning...
GPS-RTK Dead Reckoning Kit (ZED-F9R, SMA)
·
Get started with high-precision RTK GNSS and dead reckoning using u-blox's ZED-F9R module. This kit combines a sensor-fusion GPS breakout, a multiband SMA antenna and a USB cable so you have the core hardware needed for a rover setup.The ZED-F9R fuses GNSS measurements with a 3D IMU sensor, wheel...
GPS Shield With Antenna
The GPS Shield is based on the u-blox NEO-6M receiver module and plugs directly into Arduino UNO, Mega, and compatible boards. It provides GPS positioning data via a serial port connection (pins configurable to D0–D7) and includes a micro SD card slot for data logging. An active IPC antenna is i...
Grabber Bot
Think of this as an analogue robot. Wood and string combine to make a precision grabbing device. The builder controls the bot with levers and string making a very satisfying and ingenious kit.14x13x2" box.Fun, hands-on learning at its best. Building models decreases stress, increases focus, or...
Graphic Equalizer Display Filter - MSGEQ7
The MSGEQ7 is a CMOS graphic equaliser IC that divides the audio spectrum into seven frequency bands: 63 Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.25 kHz, and 16 kHz. Each band is peak-detected and multiplexed to provide a DC output representing the amplitude — ideal for driving LED audio visualisers...
Graphic LCD 128x64 STN LED Backlight
A framed 128 × 64 pixel graphical LCD with LED backlight. This STN-type display provides clear, high-contrast graphics and text output using the widely supported KS0108B parallel interface chipset. The module includes negative voltage generation circuitry onboard, simplifying integration. Key Fe...
