All Products
Showing 1-20 of 57 products · 3 unavailable products hidden
Gravity: 8-Digital LED Segment Display Module (Green)
Gravity: I2C Triple Axis Accelerometer - LIS2DH
Gravity: 0-10V 15-bit High-Precision Dual-Channel ADC Module
MPN: DFR1184
Gravity: Digital Adjustable Infrared Proximity Sensor for Arduino (0~200 cm)
Gravity: Arduino PIR (Motion) Sensor
Gravity: Digital Capacitive Touch Sensor For Arduino
Gravity: Haptic Motor Driver for LRA Motors
MPN: DRI0056
Gravity: I2C SD2405 RTC Module
Gravity: GNSS GPS BeiDou Positioning Module with RTC - I2C&UART
MPN: DFR1103
Gravity: VL53L0X ToF Laser Range Finder
Gravity: 4-Digital LED Segment Display Module (Green)
DFRobot Gravity Industrial Analog EC Meter Kit (K=1, IP68)
MPN: SEN0451
Gravity: Infrared Light Photo Interrupter Module (Wavelength 940nm)
MPN: DFR1129
Gravity: WiFi IoT Module for Science Data Acquisition (SCI DAQ)
MPN: TEL0180
Gravity: Arduino LPG Gas Sensor (MQ5)
Gravity: Analog 20A Current Sensor
Gravity: I2C VEML7700 Ambient Light Sensor (0~120Klx)
Gravity: Geiger Counter Module Ionizing Radiation Detector
DFRobot GP8630N 16-bit I2C/PWM to ±10V & 4-20mA DAC Module
MPN: DFR1230
Gravity: Non-contact Arduino Water / Liquid Level Sensor
Gravity: 8-Digital LED Segment Display Module (Green)
An 8-digit green LED segment display module with I2C communication, part of the DFRobot Gravity sensor and module range. It provides a clear, bright numerical display with 16 levels of adjustable brightness, making it easy to show sensor readings, counters, clocks, and other numerical data in you...
Gravity: I2C Triple Axis Accelerometer - LIS2DH
DFRobot presents the ultra low-power Arduino triple axis accelerometer! This device is based around a MEMS LIS2DH chip solution and has high-performance ultra-low power mode. The module is fitted with a Gravity I2C interface for easy plug and play integration in to your projects. The build in...
Gravity: 0-10V 15-bit High-Precision Dual-Channel ADC Module
·
The Gravity 0–10V ADC Module is a high-precision dual-channel analogue-to-digital converter designed to interface industrial-grade 0–10V sensors with microcontrollers and Linux-based systems. Built on the Texas Instruments ADS1115, it delivers 15-bit resolution (0.375 mV per step) with ±2 mV accu...
Gravity: Digital Adjustable Infrared Proximity Sensor for Arduino (0~200 cm)
A digital infrared proximity sensor with adjustable detection range from 0 to 200 cm. Outputs a simple digital signal — HIGH when an obstacle is detected, LOW when clear. The detection threshold is adjustable via a rear-mounted screw, making it easy to tune for different applications. Features t...
Gravity: Arduino PIR (Motion) Sensor
A passive infrared (PIR) motion sensor from DFRobot's Gravity series. It detects infrared radiation from people and animals in motion and outputs a digital HIGH signal when movement is detected — ideal for security systems, occupancy sensing, and automated lighting projects. The sensor operates ...
Gravity: Digital Capacitive Touch Sensor For Arduino
A digital capacitive touch sensor from DFRobot's Gravity series. It detects touch through the same capacitive sensing technology used in smartphones — even through thin cloth or paper. The sensor outputs a digital high/low signal, making it a simple drop-in replacement for mechanical buttons in A...
Gravity: Haptic Motor Driver for LRA Motors
·
This Gravity haptic driver module is built for Linear Resonant Actuators (LRAs), turning simple I2C commands into crisp tactile feedback for interactive projects. It is powered by the TM6605 driver chip and supports LRA resonant frequencies from 140Hz to 220Hz.The module includes 44 built-in vibr...
Gravity: I2C SD2405 RTC Module
A high-precision I2C real-time clock (RTC) module from DFRobot's Gravity series, based on the SD2405AL chip. It features an internal rechargeable battery that keeps time for 5–8 years without external power, making it ideal for data logging, alarm clocks, and any project that needs reliable timek...
Gravity: GNSS GPS BeiDou Positioning Module with RTC - I2C&UART
·
##Introduction The Gravity GNSS Positioning & Timing Module integrates satellite positioning functionality and a real-time clock (RTC). The module automatically obtains satellite time based on a preset calibration period and accurately calibrates the onboard RTC chip. This calibration effectively...
Gravity: VL53L0X ToF Laser Range Finder
The VL53L0X laser range finder is a high-precision distance sensor that based on new Time-of-Flight (ToF) principle. VL53L0X provides accurate distance measurement whatever the target reflection unlike traditional technology. It can measure absolute distances up to 2m.DFRobot has introduced VL...
Gravity: 4-Digital LED Segment Display Module (Green)
The Gravity 4-Digital LED Segment Display Module features a bright green 7-segment display with four digits, perfect for showing numbers, time, sensor readings, and other data in your projects. It communicates over I2C for simple two-wire connectivity with Arduino, Raspberry Pi, and other microco...
DFRobot Gravity Industrial Analog EC Meter Kit (K=1, IP68)
·
This industrial Gravity kit measures electrical conductivity in aqueous solutions, helping you evaluate water quality by tracking dissolved content or salinity. It is suited to hydroponics, aquaculture and environmental water monitoring where long-running measurements are needed.The pro probe is ...
Gravity: Infrared Light Photo Interrupter Module (Wavelength 940nm)
·
##Introduction The Gravity: Photo Interrupter Module integrates a high-performance ITR9608 photoelectric switch. Its compact design and easy operation make it an ideal choice for electronic projects and applications. Whether for robotics, automation equipment, or counting systems, this module pro...
Gravity: WiFi IoT Module for Science Data Acquisition (SCI DAQ)
·
The Gravity: WiFi IoT Module is a companion accessory for the Gravity: Science Data Acquisition (SCI DAQ) Module, enabling wireless sensor data transmission to IoT platforms without any programming required. Simply connect sensors to the SCI DAQ module and start uploading data instantly. Operati...
Gravity: Arduino LPG Gas Sensor (MQ5)
The Gravity MQ5 gas sensor is highly sensitive to LPG, natural gas, and town gas, with lower sensitivity to alcohol, cooking fumes, and cigarette smoke. The analogue output is proportional to gas concentration, and sensitivity can be adjusted via the on-board potentiometer. Gravity interface for ...
Gravity: Analog 20A Current Sensor
The Gravity Analog 20A Current Sensor measures both AC and DC current using the Hall effect, outputting a proportional analog voltage to your microcontroller. With high-voltage isolation built into the circuit design and a non-conductive acrylic base plate, it's designed for safe use in automatio...
Gravity: I2C VEML7700 Ambient Light Sensor (0~120Klx)
The Gravity VEML7700 is a high-accuracy digital ambient light sensor that outputs readings directly in lux (lx) over an I²C interface. Built around the Vishay VEML7700 IC, it features a 16-bit ADC, a high-sensitivity photodiode, and a low-noise amplifier — delivering precise light measurements wi...
Gravity: Geiger Counter Module Ionizing Radiation Detector
This Gravity Geiger Counter Module detects ionising radiation — including nuclear radiation, X-rays, and cosmic rays — using a large M4011 Geiger-Müller tube. When ionising particles pass through the tube, the module outputs a digital pulse that can be counted by any microcontroller to calculate ...
DFRobot GP8630N 16-bit I2C/PWM to ±10V & 4-20mA DAC Module
·
This Gravity DAC module converts I2C or PWM digital signals into stable analogue voltage or current outputs for control and automation projects. Built around the GP8630N chip, it supports output modes such as ±10V, 0-5V, 0-10V and 4-20mA, with 16-bit resolution available in I2C mode.The symmetric...
Gravity: Non-contact Arduino Water / Liquid Level Sensor
A non-contact liquid level sensor that detects the presence of liquid through a container wall — no direct contact with the liquid required. Using advanced signal processing via the XKC-Y25-T12V chip, it works through most non-metallic containers including plastic, glass, and ceramic. This makes...