All Products

SKU: SF-COM-22001 · MPN: COM-22001

A compact surface-mount Zener diode for adding voltage regulation or protection to space-constrained designs.It comes in an SOD-323 package, making it well suited to small PCBs and repairs where board space is limited. Use it for simple reference, clamping, and protection tasks within its rated l...

SKU: SF-COM-17994 · MPN: COM-17994

This 220 Ohm through-hole resistor is a handy general-purpose component for breadboards, perf boards and other prototype builds.It is a 1/4 Watt PTH axial resistor with ±5% tolerance, made with carbon film construction. The leads are a more breadboard-friendly thickness than the previous version,...

SKU: SF-COM-29201 · MPN: COM-29201

This compact TCXO is a temperature-compensated crystal oscillator designed to provide a stable 26.0MHz reference in a tiny surface-mount footprint.It uses a clipped sine wave output and runs from a 1.8V supply, making it suited to space-constrained RF, timing and embedded electronics designs that...

SKU: SF-CAB-28303 · MPN: CAB-28303

This flat flexible cable is a compact 22-pin FPC lead for joining compatible boards and peripherals where space is tight. It has a 0.5mm pitch and a 100mm length, making it suitable for short internal connections.The cable is A-B style, so pin one on one end matches pin one on the other end. Use ...

SKU: SF-CAB-19289 · MPN: CAB-19289

This simple adapter cable makes it easy to connect between 3-pin JST and 3-pin Molex connectors in your electronics project.It has a 3-pin Molex connector on one end and a 3-pin JST connector on the other, both with 0.1" spacing. The three-wire cable is handy for adapting sensors, boards or small...

SKU: SF-CAB-09215 · MPN: CAB-09215

This handy AVR programming cable combines the common 10-pin and 6-pin ISP programming interfaces in one lead, making it useful when your programmer and target board use different AVR ISP header formats.The cable is about 12 inches long and mates with pins on 1/10in centres, suiting standard 0.1 i...

SKU: SF-CAB-29325 · MPN: CAB-29325

This short mini coax lead links U.FL-equipped RF submodules and other RF devices to carrier boards. At 50mm long, it is designed to be long enough to make the connection while staying tidy inside compact builds.The 50-ohm impedance makes it well suited to almost all SparkFun RF products, includin...

SKU: SF-COM-27909 · MPN: COM-27909

This compact module provides a USB to serial UART interface using the FT231X family, making it a straightforward way to add USB connectivity to UART-based projects.It supports full modem control and works as a USB to UART bridge for embedded boards, prototypes and test setups that need reliable s...

SKU: SF-CEL-29622 · MPN: CEL-29622

Improve the signal performance of your cellular project by moving the antenna outside the enclosure. This LTE hinged external antenna helps reduce interference from internal electronics, giving your modem a cleaner signal path and a more stable connection.Designed for broad cellular compatibility...

SKU: SF-COM-28379 · MPN: COM-28379

This colour TFT touchscreen is a compact display module for adding high-resolution graphics to compatible maker projects. It provides a 320x240 pixel display area in a 2.8 inch format, using the ILI9341 controller.The display is recommended for use with Teensy 3.2 through to Teensy 4.1, making it...

SKU: SF-GPS-28997 · MPN: GPS-28997

This GNSS Flex board combines a u-blox ZED-X20P all-band RTK GNSS receiver with a Feyman IM19 IMU, giving compatible carrier boards centimetre-level positioning plus compensated attitude data for demanding navigation and surveying projects.It is designed for the SparkPNT GNSS Flex ecosystem, with...