All Products

SKU: EC-DIS00008R

This compact 8" portable LCD monitor features a 1280×800 IPS display in a durable aluminium alloy shell, measuring just 195 × 127 × 14 mm. It connects via Mini HDMI and is USB-powered, so it works with power banks, PCs, or wall adapters — no separate power brick required. Built-in speakers provi...

SKU: AF-3658

A comprehensive 420-piece white nylon screw and standoff set in M2.5 thread — the standard mounting size for most breakout boards, development boards, and single-board computers including Raspberry Pi, Feather, and similar platforms. Comes in a snap-open storage box. Nylon hardware is non-conduc...

SKU: AF-4288

Here's a hand-held-size rechargeable battery pack for your Raspberry Pi (or Metro, or anything else that uses 5V!). This pack is intended for providing a lot of power to a smartphone, tablet, etc, but we found it does a really good job of powering other miniature computers and micro-controller...

SKU: WS-7965

A USB to TTL serial adapter cable with an embedded PL2303 converter chip. This 1-metre cable provides a simple way to add serial communication to your projects, connecting a standard USB-A port to 3.3V TTL-level UART signals via a 4-pin 2.54mm header. Ideal for accessing serial consoles on singl...

SKU: AF-4994

Keep unused HDMI ports clean and dust-free with these soft silicone dust cover inserts. They slip neatly into any standard HDMI socket on computers, displays, Raspberry Pi boards, capture cards, and other devices. The pack of 10 gives you plenty of covers for multi-port setups, with spares in ca...

SKU: DF-FIT0855

This HDMI to RJ45 Ethernet Cable Extender consisting of a transmitter and a receiver is designed to synchronously transmit audio and video signals up to 30m with zero latency.The module supports HD 1080P video signal transmission.Gold plated HDMI interface, anti-oxidation, not easy to rust.No pow...

SKU: WS-25076

The Waveshare UGV02 is a 6-wheel, 4WD off-road mobile robot chassis designed for robotics development and autonomous navigation projects. With flexible rubber tyres, independent suspension, and four driven wheels, it handles rough terrain, heavy loads, and shock absorption with ease. The chassis...

SKU: DF-TEL0161 · MPN: TEL0161

##Introduction The SIM7600G is an integrated wireless communication module. It features 4G CAT1 with an uplink speed of 5Mbps and a downlink speed of 10Mbps, and supports GNSS positioning (GPS, BD, GLONASS). The module is compatible with Raspberry Pi, Arduino, and LattePanda single-board computer...

SKU: AF-2082

The Timber Pibow is a layered wood enclosure from Pimoroni for the Raspberry Pi 1 Model B+. Crafted from high-quality wood with transparent acrylic top and base layers, it provides a natural, elegant look while protecting the board. An extension layer is included for stacking HATs or other access...

SKU: DF-DFR0849

A dual-output USB fast-charging buck module with wide 6–32V input range and adjustable 3–12V output. It supports multiple fast-charging protocols including Qualcomm QC 3.0, Huawei FCP/SCP, and Samsung AFC, making it compatible with 99% of smartphones on the market. Both USB channels operate indep...

SKU: LB-LR0309-36

A 120-piece M2.5 brass standoff kit with a mix of female-female spacers, male-female spacers, stainless steel screws, and nuts — all organised in a reusable plastic storage box. M2.5 is the standard mounting size for Raspberry Pi, many single-board computers, and PCB mounting applications. The k...

SKU: AF-5213

Soft silicone dust covers designed to fit Mini HDMI ports. They slip into the socket to keep dust and debris out when the port is not in use, helping to maintain reliable connections over time. Key Features Mini HDMI Fit – Sized specifically for Mini HDMI sockets Soft Silicone – Easy to inser...

SKU: AF-2910

This super slim, super tiny, and super cute Micro-B to USB on-the-go adapter is so slim, tiny, and cute that we'd pinch its cheeks if it was big enough to have cheeks.  At just ~15.5mm long, ~11.3mm wide, and ~2mm, this really is the tiniest little adapter we've probably ever seen.But d...

SKU: AF-2218

The TFP401 breakout is a compact HDMI/DVI decoder that outputs raw 24-bit colour pixel data to 40-pin TTL displays. It decodes unencrypted video at any resolution from 25–165 MHz pixel clock (up to 1080p) and includes a built-in backlight driver with PWM dimming control. Designed for use with si...

SKU: AF-4279

The Adafruit Ultimate GPS with USB brings plug-and-play GPS and GLONASS positioning to any computer, laptop, or embedded Linux device via a built-in CP2104 USB-to-Serial converter. Simply connect a Micro USB cable and start receiving location data at 9600 baud — no microcontroller required. Buil...

SKU: DF-SEN0308

The Gravity Analogue Waterproof Capacitive Soil Moisture Sensor from DFRobot measures soil moisture using capacitive sensing rather than resistive probes, offering significantly better corrosion resistance and longer lifespan. The sensor is fully waterproof and can operate even when completely su...

SKU: DF-FIT0819

A waterproof USB endoscope camera with a 3-in-1 connector (USB, Micro USB, and USB-C) for use with computers, Android phones, Raspberry Pi, NVIDIA Jetson, LattePanda, and other single-board computers. The 8 mm lens diameter and 5-metre semi-rigid cable let you inspect narrow, dark, and hard-to-re...

SKU: EC-DIS08001R

A portable 8″ IPS LCD monitor with 1280 × 800 resolution and 5-point capacitive touchscreen. The aluminium alloy shell keeps the display compact and durable, while the IPS panel delivers consistent image quality at wide viewing angles. Connects via Mini HDMI for video and USB for power and touch ...

SKU: DF-DFR1178 · MPN: DFR1178

The DFRobot 15.6" Portable 4K OLED Touch Display features a Samsung OLED panel with 3840×2160 resolution, delivering exceptional colour accuracy with 100% DCI-P3 and 100% Adobe RGB coverage. With 829 million self-luminous pixels, a 100,000:1 contrast ratio, and 550 nit peak brightness, it provide...

SKU: PL-1037

The 0.100″ (2.54 mm) 2×20-Pin Straight Female Header is a double-row, 40-pin socket strip designed to mate with standard 0.1″ pitch male headers. This is the standard GPIO header size used on Raspberry Pi and other single-board computers, making it an essential connector for SBC projects. The 2×...