All Products

SKU: SF-WRL-28767 · MPN: WRL-28767

The Taoglas FXP895 is a compact flexible PCB antenna for ISM and LoRa applications, designed to fit into small connected devices where space is tight.Its wideband 860 to 928MHz coverage suits regional ISM/LoRa frequency bands, helping one antenna design support multiple markets. The flexible PCB ...

SKU: WS-19297 · MPN: 19297

This 5G omni-directional antenna provides 18dBi gain across a wide 600–6000MHz frequency range, covering 5G, 4G, 3G, and GNSS bands. The omni-directional radiation pattern delivers consistent signal quality in all directions without needing to orient the antenna toward a specific tower. It conne...

SKU: SF-CAB-14911

This 1-metre interface cable converts between N-type and RP-SMA connectors, making it ideal for connecting larger LoRa antennas (such as 915MHz antennas with N-type connectors) to devices with RP-SMA ports. The RG316 coaxial cable supports frequencies up to 3GHz. Specifications Connector A: N-...

SKU: AF-920

This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. Unfortunately they are not compatible! This adapter solves the problem with an SMA jack on one end and an RP-SMA Plug on the other. We ...

SKU: SF-CAB-27480 · MPN: CAB-27480

This 1 metre RF coaxial cable adapts an SMA male connection to a BNC male connection, making it handy for test gear, antennas, RF modules and lab setups that use mixed connector types.It uses RG316-style coax shielding, which is suited to applications that need stable performance in higher-temper...

SKU: SF-GPS-29363 · MPN: GPS-29363

This swappable GNSS Flex board pairs a Septentrio mosaic-G5 P3 GNSS receiver with a Feyman IM19 IMU for high-precision positioning, attitude measurement and dead reckoning in compact systems. It is suited to autonomous platforms, robotics and portable surveying tools where size, weight and power ...

SKU: DF-FIT0957 · MPN: FIT0957

The IPEX4 to SMA Female Connector Cable is a 200 mm adapter designed for single-board computers equipped with an IPEX4 (MHF4) wireless interface, including the LattePanda 3 Delta, LattePanda 2 Alpha, and LattePanda 2 Delta. It converts the onboard IPEX4 connector to a standard SMA female port (ex...

SKU: SF-TOL-20687 · MPN: TOL-20687

Make U.FL connector handling a little less nerve-racking with this compact extraction jig. It is designed to help connect and withdraw tiny U.FL connectors from a seated position, reducing the chance of tearing a surface-mount connector off your board.The L-shaped bending portion hooks onto the c...

SKU: SF-WRL-12861

This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 25cm (9.8") long and has a 50Ω impedance that can handle frequencies up to 17 GHz. The SMA connectors at each end are small enough for most consumer GPS, cellular, and other RF applications and they use a threa...

SKU: SF-GPS-27500 · MPN: GPS-27500

The u-blox ANN-MB2 is a high-precision multi-band active GNSS antenna designed for centimeter-level positioning accuracy. Supporting L1/L2/L5/E6/B3 frequency bands across multiple satellite constellations, this antenna is ideal for demanding precision applications like RTK surveying, autonomous v...

SKU: SF-GPS-30975 · MPN: GPS-30975

Built around the u-blox ZED-F9T-20B receiver, this breakout is made for projects where precise time matters as much as location. Under clear skies it can provide five nanoseconds of timing accuracy without requiring external GNSS correction data, making it suitable for 5G IoT networks, distribute...

SKU: SF-GPS-00177

This embedded GPS antenna with built-in LNA (Low Noise Amplifier) is designed for small, mobile applications. Its compact, unpackaged form factor makes it ideal for creating truly small GPS prototypes. Comes with a 5-inch cable terminated with a standard male SMA connector. Works well out of the...

SKU: SF-CEL-00290

A Quad-band antenna for embedded cellular devices. This antenna will allow you to connect your cellular module to the outside world. Operates on four frequencies. Comes with a 3M adhesive backing for mounting. Standard male SMA terminated. Key Specifications: Quad-band: 850/900/1800/1900MHz a...

SKU: SF-GPS-29362 · MPN: GPS-29362

Build high-precision positioning into your GNSS Flex setup with this swappable ZED-X20P module. It uses the u-blox X20 engine, the successor to the F9 generation, for demanding navigation, control, robotics and vehicle applications.The module connects to a GNSS Flex pHAT carrier board via standar...

SKU: DF-DFR1022

DTOF Ranging MethodThanks to the DTOF (Direct Time-of-Flight) technology developed by SLAMTEC, RPLIDAR S2 guarantees consistent ranging resolution. Even in longer distance, the resolution always keeps the same. Also, DTOF allows RPLIDAR S2 to detect almost ANY thing with different material types,...

SKU: SF-GPS-23288 · MPN: GPS-23288

Bring high-precision GNSS positioning to your project with the u-blox NEO-F9P engine and dual-band L1/L5 reception. L5 signals sit in the protected ARNS band, helping reduce RF interference and improve reliability in challenging environments such as dense city streets.The breakout provides five s...

SKU: SF-GPS-25071 · MPN: GPS-25071

The u-blox ANN-MB5 multi-band (L1/L5/E5a/B2a/NavIC) active GNSS antenna is designed for the new generation of multi-frequency, multi-constellation standard precision GNSS technology, which can achieve the most accurate, reliable, and robust positioning even in challenging environments. ANN-MB5’s ...

SKU: SF-WRL-18712 · MPN: WRL-18712

Built for field deployments well beyond WiFi and mobile coverage, this compact tracker combines an Iridium 9603N Short Burst Data modem with the Arduino-compatible Artemis module. It can send and receive short satellite messages for remote sensing, asset tracking, high-altitude ballooning, ocean ...

SKU: SF-WRL-29361 · MPN: WRL-29361

The Maxtena M1621HCT-P-SMA is a compact, passive Iridium antenna designed for reliable data communication over the Iridium satellite network. It is well suited to satellite IoT builds using the RockBLOCK 9704 module.Its precision-tuned helical design provides consistent performance across the ful...

SKU: SF-GPS-29891 · MPN: GPS-29891

Build high-accuracy GNSS projects on a Raspberry Pi with this GNSS Flex pHAT and matched LG290P plus IM19 module. It combines Quectel's quad-band LG290P RTK receiver with the Feyman IM19 IMU for centimetre-level positioning, tilt compensation and improved navigation through brief GNSS outages.The...