All Products
Showing 1-20 of 27 products · 4 unavailable products hidden
Interface Cable SMA to U.FL
The Interface Cable SMA to U.FL is a connector cable that interfaces U.FL RF connectors to regular SMA connections. APPLICATIONS Connect Standard SMA Connector for SIM 908 GPS/GPRS/GSM Shield For Arduino SPECIFICATIONS Frequency Range:DC~12.4GHz VSWR:≤1.10+0....
Interface Cable SMA to U.FL
This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. Documents: Datasheet RF Connector Buying Guide
RTK Surveying Kit with ZED-F9P GNSS Receiver
·
This field-ready RTK kit is built for centimetre-level global positioning measurements using GNSS RTK. The RTK Surveyor is a Bluetooth® enabled multi-band GNSS receiver based on the ESP32 from Espressif and the ZED-F9P from u-blox, with 300mm approximate accuracy out of the box and 18mm accuracy ...
Interface Cable - SMA Female to SMA Male (25cm)
This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 25cm (9.8") long and has a 50Ω impedance that can handle frequencies up to 17 GHz. The SMA connectors at each end are small enough for most consumer GPS, cellular, and other RF applications and they use a threa...
Interface Cable U.FL to SMA
A U.FL to SMA (jack) bulkhead straight connector with a 1.32 mm diameter cable. Less than -2 dB cable insertion loss up to 6 GHz. Both connectors are gold-plated brass and the cable conductor is silver-coated copper. Includes: 1x U.FL to SMA cable 1x Locking Nut and Bulkhead Washer Features:...
Interface Cable - SMA Female to SMA Male (10m, RG58)
When experimenting with GPS or RF it can be very handy to have the antenna on the top of your house or outside with a clear view of the sky while you stay in doors and warm at your keyboard. This 10m (33') SMA extension does a great job of connecting your receiver or radio to a distant antenna wi...
Reinforced Interface Cable - SMA Male to TNC Male (10m)
This is a 10 meter (33 ft) long Male TNC to Male SMA cable with injection molded stress-relief boots. This is an excellent cable for connecting one of our RTK development boards to a high quality 'UFO' style GNSS antenna. It's long enough to connect to an antenna on the roof to one of our GNSS re...
Interface Cable - SMA Male to SMA Female Cable (1M, RG174)
This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 1M (39.3in.) long with RG174 housing. The SMA connectors at each end are small enough for most consumer GPS, cellular, and other RF applications and they use a threaded housing to create strong mechanical connecti...
Interface Cable - SMA Male to SMA Female (25cm, RG174)
A 25 cm (9.8″) SMA male-to-female extension cable with RG174 coaxial housing. Ideal for mounting an antenna on the outside of an enclosure while keeping the RF module or GPS receiver safely inside. The threaded SMA connectors provide a secure mechanical connection suitable for GPS, cellular, Wi-F...
Reinforced Interface Cable - SMA Male to TNC Male (300mm)
A 300mm (1 foot) SMA male to TNC male cable with injection-moulded stress-relief boots. Built with SYV-50-3 cable for an excellent balance of low signal loss and high flexibility — chosen over RG58 for superior performance at GNSS frequencies. Ideal for connecting RTK development boards to high-...
SMA Male to SMA Male Adapter
·
This compact RF adapter has standard-polarity male SMA connectors on both ends, making it useful when you need to change a female SMA connection into a male one.It can be screwed onto the female end of an SMA female-to-male interface cable to make a short SMA male-to-male cable assembly.It is par...
IPEX4 to SMA Wireless Communication Female Connector Cable for LattePanda 3 Delta / 2 Alpha / 2 Delta (20cm)
·
The IPEX4 to SMA Female Connector Cable is a 200 mm adapter designed for single-board computers equipped with an IPEX4 (MHF4) wireless interface, including the LattePanda 3 Delta, LattePanda 2 Alpha, and LattePanda 2 Delta. It converts the onboard IPEX4 connector to a standard SMA female port (ex...
WAVEGO, 12-DOF Bionic Dog-Like Robot, Open Source for ESP32 And PI4B, Facial Recognition, Color Tracking, Motion Detection
WAVEGO, 12-DOF bionic dog-like robot, open source for ESP32 and PI4B, facial recognition, color tracking, motion detectionHigh-DOF bionic quadruped robotPowered by ESP32 sub controller & Raspberry Pi 4B host controllerThe WAVEGO is a high-DOF bionic dog-like robot which features 2.3kg.cm large to...
IPEX to SMA Male Cable (Inner Needle)
A gold-plated IPEX (U.FL) to SMA male (inner needle) pigtail cable for connecting wireless modules to external antennas. The gold-plated connectors have passed 48-hour salt spray testing for long-lasting corrosion resistance. Built with RG1.13 wire and a high-density shielding layer, this cable ...
Interface Cable - RP-SMA Male to RP-SMA Female (25cm, RG174)
A 25cm RP-SMA male-to-female extension cable with RG174 coaxial housing. Ideal for repositioning an antenna to the outside of an enclosure while keeping your electronics neatly inside, this cable provides a reliable RF connection for GPS, cellular, Wi-Fi, and other RF applications. The RP-SMA (R...
GPS/GNSS Magnetic Mount Antenna SMA - 3m
This GPS/GNSS magnetic mount antenna is designed for multi-constellation reception, supporting both GPS and GLONASS satellite systems. The magnetic base allows easy mounting on any metal surface such as a vehicle roof or ground plate, and the 3 m cable with standard SMA connector provides flexibl...
Gravity Air780E 4G CAT1 IoT Module for China, India & SEA
·
Add LTE CAT1 connectivity to IoT projects and development boards with this Air780E communication module from DFRobot. It supports LTE-FDD B1/B3/B5/B8 and LTE-TDD B34/B38/B39/B40/B41 bands, making it suitable for deployments in China, India, Southeast Asia and other supported regions.The module pr...
Air780EU 4G Cat 1 IoT Module for EMEA & Thailand
·
The Air780EU is a 4G Cat 1 communication module for IoT projects that need cellular connectivity across Europe, the Middle East, Russia, Thailand, Africa and other supported regions. It operates on LTE-FDD B1/B3/B7/B8/B20/B28 bands and provides up to 10Mbps downlink and 5Mbps uplink.It brings the...
SparkFun GPS-RTK-SMA Kit
The SparkFun GPS-RTK-SMA Kit provides everything you need to get started with centimetre-level GPS accuracy using the u-blox ZED-F9P module. Capable of 10mm three-dimensional positioning accuracy with RTK corrections, this kit is ideal for precision navigation, surveying, and autonomous vehicle a...
Adafruit Si5351A Clock Generator with STEMMA QT - 8KHz to 160MHz
The Adafruit Si5351A Clock Generator with STEMMA QT lets you generate precise, arbitrary clock frequencies from 8 kHz to over 150 MHz using a simple I2C interface. This updated version adds STEMMA QT / Qwiic connectors for solderless hookup alongside the traditional breadboard headers. With a pr...
