All Products
Showing 1-20 of 60 products
SparkFun Qwiic Shield for Teensy - Extended
An extended Qwiic shield that adds four Qwiic connectors to Teensy 4.1, Teensy 3.6, and Teensy 3.5 boards. Connects the I²C bus (GND, 3.3 V, SDA, SCL) to two horizontal and two vertical Qwiic ports for easy daisy-chaining of I²C sensors and actuators. Includes a PROG button that mirrors the Teen...
SparkFun Qwiic / Stemma QT FeatherWing (Shield for Thing Plus)
The SparkFun Qwiic FeatherWing (Shield for Thing Plus) provides an easy-to-assemble way to add the STEMMA QT / Qwiic connect ecosystem to any development board with Feather/Thing Plus Footprint. It connects the I2C bus (GND, 3.3V, SDA, and SCL) on your Feather to four SparkFun Qwiic / Stemma QT c...
SparkFun Qwiic Shield for Thing Plus
The SparkFun Qwiic Shield for Thing Plus adds four Qwiic connectors (two horizontal, two vertical) to any Thing Plus or Adafruit Feather-format development board. It breaks out the I²C bus (GND, 3.3 V, SDA, SCL) to standard 1 mm pitch JST connectors for solderless daisy-chaining of Qwiic-compatib...
SparkFun Qwiic Kit for Raspberry Pi
The SparkFun Qwiic Kit for Raspberry Pi provides everything you need to start using I2C sensors and displays with your Raspberry Pi via the Qwiic connector system. The kit includes a Qwiic HAT that adds four Qwiic connectors to your Pi's GPIO header, along with three sensor/display breakouts and ...
SparkFun Qwiic SHIM for Raspberry Pi
The SparkFun Qwiic SHIM for Raspberry Pi is a small, easily removable breakout that easily adds a Qwiic connector to your Raspberry Pi. The SHIM design allows you to plug directly to the Pi's I2C bus with no soldering required and the thin PCB design allows for it to be sandwiched on your Pi GPIO...
SparkFun Qwiic Shield for Teensy
The SparkFun Qwiic Shield for Teensy adds four Qwiic (I2C) connectors to your Teensy board, providing quick access to the SparkFun Qwiic ecosystem of sensors, actuators, and displays. Sized to fit the Teensy 4.0, Teensy 3.2, and Teensy LC footprints. The shield connects GND, 3.3V, SDA, and SCL f...
Raspberry Pi 4 Basic Kit - 2GB
·
This starter kit is built around the Raspberry Pi 4 Model B with 2 GB of RAM, giving you the core board and essential accessories needed to get a Pi 4 project running.The Raspberry Pi 4 uses Micro HDMI for display output and USB Type-C for power, so the kit includes a Micro HDMI to HDMI cable and...
TFT FeatherWing - 2.4 320x240 Touchscreen For All Feathers
A 2.4" TFT touchscreen display shield for the Adafruit Feather ecosystem. Featuring a 320×240 pixel display with 16-bit colour, a resistive touchscreen, and a built-in microSD card slot, this FeatherWing adds a full interactive display to any Feather board via SPI. Comes fully assembled with dua...
Raspberry Pi 4 Desktop Kit - Without Raspberry Pi
·
Got a Raspberry Pi 4 ready to go? This bring-your-own-Pi kit bundles the accessories needed to turn an HDMI monitor into a Raspberry Pi desktop PC or media centre, without including the Raspberry Pi board itself.The kit includes a blank 64GB microSD card with adapter, selected for smooth Raspberr...
SparkFun Qwiic WiFi Shield - DA16200
Ultra. Low. Power. Arguably the best three words in the IoT world. SparkFun has teamed up with ARM and Dialog to provide you with this Qwiic WiFi Shield based around the DA16200 module. The DA16200 is a fully integrated WiFi module with a 40MHz crystal oscillator, 32.768KHz RTC clock, RF Lumped R...
SparkFun Qwiic pHAT V2.0 for Raspberry Pi
The SparkFun Qwiic pHAT V2.0 for Raspberry Pi provides you with the quickest and easiest way to enter into SparkFun’s Qwiic ecosystem while still using that Raspberry Pi that you’ve come to know and love. The Qwiic pHAT connects the I2C bus (GND, 3.3V, SDA, and SCL) on your Raspberry Pi to an ...
NB-IoT / Cat-M(eMTC) / GNSS HAT for Raspberry Pi, Globally Applicable
Prohibited by the module manufacturer SIMCOM, we're not allowed to ship this product, or to provide any tech support, to the following countries/regions: Iran, North Korea, Cuba, Sudan, Syrian. NB-IoT/Cat-M(eMTC)/GNSS HAT for Raspberry Pi, Based on SIM7080G, Globally Applicable Overview ...
SparkFun Qwiic Shield for Arduino
The SparkFun Qwiic Shield is an easy-to-assemble board that provides a simple way to incorporate the Qwiic Connect System with your Arduino-based device. This shield connects the I2C bus on your Arduino to a series of SparkFun Qwiic connectors and provides the circuitry to convert the 5V giv...
Pico Add-On Flipper for XRP
·
This add-on board solves a common Raspberry Pi Pico HAT problem: fixed orientation. It takes the standard pinout for a Raspberry Pi Pico development board and flips it as if the Pico had been physically rotated over, facing down.That makes it useful when your Pico needs to stay in a particular or...
SparkFun Raspberry Pi 4 Hardware Starter Kit - 4GB
The Raspberry Pi 4 Hardware Starter Kit provides a solid set of parts and instruction for working with the Raspberry Pi 4 in a more hardware-centric manner. While the Raspberry Pi isn't typically considered a go-to for hardware projects, its I/O pins hold a lot of benefits that you can use for a ...
Gravity: AI Visual Gesture and Face Tracking Sensor (5 Gestures, Range 3m)
·
##Introduction The AI Visual Gesture and Face Tracking Sensor is a high-performance, offline AI recognition module designed for non-contact interaction. With advanced facial tracking and gesture recognition capabilities, it detects up to five distinct gestures and tracks human presence within a r...
Button SHIM
Button SHIM gives you five handy, physical buttons and an RGB status LED, and it's HAT and pHAT-compatible! Our SHIM-format boards are designed to slip neatly onto your Pi's GPIO pins and still allow you to use HATs and pHATs at the same time. Or solder the included female header onto Button S...
SparkFun Qwiic HAT for Raspberry Pi
The SparkFun Qwiic HAT for Raspberry Pi is the quickest and easiest way to enter into SparkFun’s Qwiic ecosystem while still using that Raspberry Pi that you’ve come to know and love. The Qwiic HAT connects the I2C bus (GND, 3.3V, SDA and SCL) on your Raspberry Pi to an array of Qwiic connectors...
Adafruit FeatherWing OLED - 128x64 OLED Add-on For Feather - STEMMA QT / Qwiic
The Adafruit FeatherWing OLED 128x64 adds a crisp 1.3-inch monochrome OLED display and three tactile user buttons (A, B, C) to any Feather board. The 128×64 white OLED pixel array is self-emissive — no backlight needed — delivering high contrast and excellent readability in a compact form factor....
MY1690X-16S Serial MP3 Player Shield for Arduino
·
Add stand-alone audio playback to an Arduino project with this serial MP3 player shield based on the MY1690X decoder IC. It can play MP3 and WAV files from a standard microSD card, making it handy for music, voice prompts and sound effects.The shield is controlled over a serial UART command set a...
