Adafruit
TFT FeatherWing - 2.4 320x240 Touchscreen For All Feathers
A 2.4" TFT touchscreen display shield for the Adafruit Feather ecosystem. Featuring a 320×240 pixel display with 16-bit colour, a resistive touchscreen, and ...
Get notified when back in stock
A 2.4" TFT touchscreen display shield for the Adafruit Feather ecosystem. Featuring a 320×240 pixel display with 16-bit colour, a resistive touchscreen, and a built-in microSD card slot, this FeatherWing adds a full interactive display to any Feather board via SPI.
Comes fully assembled with dual sockets — plug your Feather straight in with no soldering required. Includes a reset button, an on/off switch (connected to the Feather Enable pin), and four mounting holes for secure attachment.
Key Features
- 2.4" TFT Display – 320×240 pixels, 16-bit colour
- Resistive Touchscreen – Built-in, uses one additional SPI pin
- microSD Card Slot – Store and display images from SD card
- SPI Interface – Fast communication, compatible with all Feather boards
- 4 White LED Backlight – Bright, even illumination
- Dual Sockets – Plug in your Feather and tap into pins for wiring
- Reset Button & On/Off Switch – Connected to Feather Enable pin
- 4 Mounting Holes – Easy to secure in enclosures
- Fully Assembled – No soldering required
Ideal For
- Adding a touchscreen UI to Feather projects
- Portable data displays and dashboards
- Image viewers and photo frames
- Interactive IoT interfaces
Package Contents
- 1× TFT FeatherWing 2.4" Touchscreen (fully assembled with sockets)
Resources
Jargon buster
Plain-language definitions for the technical terms used above.
- FeatherWing
- A FeatherWing is an add-on board made to plug into the Feather microcontroller board layout. Knowing a product is a FeatherWing helps you check whether it will physically and electrically fit your Feather-style mainboard.
- IoT
- Short for Internet of Things, meaning physical devices that connect to networks or the internet to send data or be controlled remotely. It matters if you want projects such as connected sensors, remote controls or classroom data-logging activities.
- LED
- A light-emitting diode (LED) is a small electronic component that emits light when current flows through it in the correct direction. Because it only conducts one way, its polarity matters, and a through-hole LED must be soldered the correct way around to light up.
- microSD card
- A microSD card is a small removable flash memory card used to store data such as audio, images, logs or program files. Its capacity and formatting (often FAT32 or exFAT) affect how much can be stored and whether the card needs preparing before use.
- Shield
- An add-on board that plugs into a main controller board to give it extra features such as sensing, motor control or communication. Knowing a product supports shields helps you judge whether it can connect neatly into an existing maker-board setup.
- SPI
- A fast serial communication bus often used for displays, memory cards, and sensors. It matters because SPI devices need specific pins for clock and data, plus a separate chip-select line for each device.
- TFT
- A thin-film transistor display is a common type of colour LCD used for graphics screens. Knowing a product is for TFTs helps you check that the driver board matches the display’s connector, resolution, backlight, and signalling method.
Find this product in
Brands
Displays & Screens
Related Tutorials
Free guides on learn.littlebird.com.au
