All Products
Showing 1-20 of 60 products
12V Low noise DC Motor 146RPM w/Encoder
Rubber Wheel Motor Kit
20.4:1 Metal Gearmotor 25Dx50L mm HP 12V with 48 CPR Encoder
Metal DC Geared Motor w/Encoder - 12V 122RPM 38Kg.cm
34:1 Metal Gearmotor 25Dx52L mm HP 12V with 48 CPR Encoder
99:1 Metal Gearmotor 25Dx54L mm MP 12V with 48 CPR Encoder
Metal DC Geared Motor w/Encoder - 12V 83RPM 45Kg.cm
227:1 Metal Gearmotor 25Dx56L mm MP 12V with 48 CPR Encoder
Direct Drive Servo Motor DDSM315 – Low Noise, Wide Speed, RC Car & Robot Compatible
MPN: 31266
Metal Gearmotor with Encoder - 12V (9.7:1)
HCR - Mobile Robot Platform (Support Kinect)
Hobby Motor with Encoder - Plastic Gear (Pair, Red)
MPN: ROB-24053
Metal DC Geared Motor w/Encoder - 12V 251RPM 18Kg.cm
12V GA25-370 DC Gear motor with Speed Encode 280 RMP
40kg.cm Metal Serial Bus Servo, High Precision And Large Torque, With Programmable 360 Degrees Magnetic Encoder and Brushless Motor
N20 Motor With Encoder and Cable (Pair) - SparkFun Electronics
MPN: ROB-28633
N20 DC Motor with Magnetic Encoder - 6V with 1:50 Gear Ratio
N20 DC Motor with Magnetic Encoder - 6V with 1:298 Gear Ratio
High Torque Waterproof Digital Servo with Magnetic Encoder (35KG, 360°, IP54)
MPN: SER0067
20kg.cm Bus Servo Motor, 106PRM High Speed, Large Torque, With 360 Degrees High Precision Magnetic Encoder
12V Low noise DC Motor 146RPM w/Encoder
The DFRobot 12V Low Noise DC Motor (Model 28PA51G) is a quiet, high-torque geared motor with a built-in two-phase hall encoder. Designed for applications where noise is a concern, it produces approximately 57–68 dBA under no-load conditions — making it well suited for indoor robotics and equipmen...
Rubber Wheel Motor Kit
This is a quality pack for indoor robots especially our Home Care Robot platform, comes with 12V Low noise DC Motor 146RPM, Encoder and Rubber Wheel 136x24mm (Pair). 12V Low noise DC Motor 146RPM w/Encoder One of our favourite customized high quality DC motor. Low noise, high torque ou...
20.4:1 Metal Gearmotor 25Dx50L mm HP 12V with 48 CPR Encoder
A high-power 12V brushed DC gearmotor with a 20.4:1 metal spur gearbox and integrated 48 CPR quadrature encoder. The encoder on the motor shaft provides 979.62 counts per revolution of the gearbox output shaft, enabling precise speed and position control for robotics applications. The cylindrica...
Metal DC Geared Motor w/Encoder - 12V 122RPM 38Kg.cm
This is a Gear Motor w/Encoder, model No. GB37Y3530-12V-90EN. It is a powerful 12V motor with a 90:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 16 counts per revolution of the motor shaft, which corresponds to 1440 counts per revolution of the gearbox's ou...
34:1 Metal Gearmotor 25Dx52L mm HP 12V with 48 CPR Encoder
A high-power 12V brushed DC gearmotor in the Pololu 25D form factor (25mm diameter) with a 34.014:1 metal spur gearbox and an integrated 48 CPR quadrature encoder. The encoder provides 1632.67 counts per revolution of the gearbox output shaft, enabling precise speed and position control for robot...
99:1 Metal Gearmotor 25Dx54L mm MP 12V with 48 CPR Encoder
A medium-power 12V brushed DC gearmotor with a 98.78:1 metal spur gearbox and an integrated 48 CPR quadrature encoder on the motor shaft. The encoder provides 4741.44 counts per revolution of the gearbox output shaft, enabling precise closed-loop speed and position control. The cylindrical motor...
Metal DC Geared Motor w/Encoder - 12V 83RPM 45Kg.cm
This 12 V DC geared motor (model GB37Y3530-12V-83R) pairs a powerful brushed motor with a 131:1 metal gearbox and an integrated Hall-effect quadrature encoder. The encoder provides 16 counts per revolution on the motor shaft — equivalent to 2096 counts per revolution on the gearbox output — givin...
227:1 Metal Gearmotor 25Dx56L mm MP 12V with 48 CPR Encoder
This medium-power 12V brushed DC gearmotor features a 226.76:1 metal spur gearbox and an integrated 48 CPR quadrature encoder on the motor shaft, providing 10,884.47 counts per revolution of the gearbox output shaft for precise position and speed feedback. The gearmotor has a cylindrical form fa...
Direct Drive Servo Motor DDSM315 – Low Noise, Wide Speed, RC Car & Robot Compatible
· MPN: 31266
The DDSM315 is a direct drive servo motor from Waveshare that combines a brushless outer rotor motor (PMSM), encoder, and servo driver into a single compact unit. By eliminating a traditional gearbox reducer, it achieves zero-backlash positioning with ultra-low noise (≤50 dB), making it well suit...
Metal Gearmotor with Encoder - 12V (9.7:1)
This 12V brushed DC gearmotor features a 9.68:1 metal spur gearbox and an integrated 48 CPR quadrature encoder on the motor shaft, providing 464.64 counts per revolution of the gearbox output. The two-channel Hall effect encoder senses a magnetic disk on the motor shaft, delivering speed and dire...
HCR - Mobile Robot Platform (Support Kinect)
The HCR (Home Care Robot) Mobile Robot Platform is a two-wheel-drive robot chassis with a three-level structure, designed for building indoor service and research robots. The kit includes two DC motors with integrated encoders, two rubber wheels, an omni-directional caster wheel, three collision ...
Hobby Motor with Encoder - Plastic Gear (Pair, Red)
· MPN: ROB-24053
These DG01D-E hobby motors come as a matched pair, each with a built-in hall effect speed encoder and a 1:48 plastic gearbox. The hall sensor detects the magnetic plate's polarity — south pole outputs high, north pole outputs low — giving you precise speed and position feedback for closed-loop mo...
Metal DC Geared Motor w/Encoder - 12V 251RPM 18Kg.cm
This is a Gear Motor w/Encoder, model No.GB37Y3530-12V-251R. It is a powerful 12V motor with a 43.8:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 16 counts per revolution of the motor shaft, which corresponds to 700 counts per revolution of the gearbox's outp...
12V GA25-370 DC Gear motor with Speed Encode 280 RMP
The GA25-370 is a compact 12V DC gear motor with metal gears and a built-in speed encoder for closed-loop control. Running at 280 RPM, it provides a good balance of speed and torque for small robotics and automation projects. Key Features Built-In Speed Encoder – Real-time speed feedback for P...
40kg.cm Metal Serial Bus Servo, High Precision And Large Torque, With Programmable 360 Degrees Magnetic Encoder and Brushless Motor
The Waveshare ST3025 is a high-performance metal serial bus servo featuring a brushless motor, steel gearbox, and 360° programmable magnetic encoder. With up to 40 kg·cm of torque at 12V, it is built for demanding robotics applications requiring precise position and speed control. Controllable v...
N20 Motor With Encoder and Cable (Pair) - SparkFun Electronics
· MPN: ROB-28633
A pair of compact N20 gearmotors with built-in encoders, ideal for small-scale robotics projects. These popular motors pack power and precision into a tiny 12×10mm gearbox profile, making them perfect for differential drive robots, mini rovers, and space-constrained builds. Each motor includes a...
N20 DC Motor with Magnetic Encoder - 6V with 1:50 Gear Ratio
This N20 micro geared DC motor includes a built-in magnetic encoder wheel and two Hall effect sensors, providing speed and direction feedback without additional wiring. The compact N20 form factor makes it well suited for small robotics projects requiring precise motor control. The motor runs on...
N20 DC Motor with Magnetic Encoder - 6V with 1:298 Gear Ratio
This N20 micro DC gearmotor includes a built-in magnetic encoder with two Hall effect sensors, providing both speed and direction feedback without additional wiring. The compact N20 form factor makes it ideal for small robotics projects where precise motor control is needed. The magnetic encoder...
High Torque Waterproof Digital Servo with Magnetic Encoder (35KG, 360°, IP54)
· MPN: SER0067
This high-torque waterproof digital servo delivers up to 35 kg·cm of torque at 7.4V and features a 12-bit magnetic encoder for precise absolute position control across a full 360° range. Built for demanding robotics and automation applications, it combines reinforced steel gears, dual ball bearin...
20kg.cm Bus Servo Motor, 106PRM High Speed, Large Torque, With 360 Degrees High Precision Magnetic Encoder
A high-performance 20kg·cm bus servo motor (model ST3215-HS) with 360-degree high-precision magnetic encoder and UART serial bus control. It supports both servo mode (precise angle control) and motor mode (continuous rotation), making it versatile for robotics applications from robotic arms to wh...
