All Products
AI Overview
“Little bird board” is a broad match in the catalogue—these are the most relevant Little Bird branded boards by use-case:
Microcontroller / programmable boards
- Uno R3 - Little Bird ($19.55) — Arduino Uno R3 compatible development board (shield-compatible layout).
- Little Bird Finch Board ATTiny85 ($7.80) — ATtiny85 tiny programmable board aimed at e-textiles / wearables.
- Little Bird Finch Board ATTiny85 x 5 ($36.05) — 5-pack of the Finch boards for classes/workshops.
- EagLED - Little Bird E-Textile Snapable Board ($27.20) — Arduino-compatible wearable board with LEDs, light sensor, push button, and battery holder.
- EagLED - Little Bird E-Textile Snippable Board with Buzzer ($34.35) — similar wearable board but snippable and includes a buzzer.
LED “boards” (add addressable RGB lighting)
- Little Bird Lorikeet WS2812B Rainbow Board ($2.00) — 5× WS2812B (NeoPixel-compatible) addressable LEDs.
- Little Bird Lorikeet WS2812B Rainbow Board with Right Angle Header ($3.50) — Lorikeet version with a right-angle header.
- Little Bird Macaw WS2812B Rainbow Board 3 LED ($1.30) — compact 3× WS2812B addressable LED board.
- Little Bird Toucan 8 x APA102 RGB LED ($11.65) — Raspberry Pi add-on with 8× APA102 smart LEDs.
Breakout / interface boards
- Little Bird Breakout Nest for Raspberry Pi ($26.35) — Raspberry Pi GPIO breakout for easier external wiring.
- Little Bird Breakout Board for XBee Module ($0.65) — simple XBee pin breakout to 0.1" headers.
Specialty input board
- ShakeUp Board Only ($38.60) — USB board that appears as a keyboard/mouse and lets you trigger inputs using alligator clips.
Which type of “Little Bird board” are you after?
Collections
Showing 1561-1580 of 1715 products
Coin Cell Battery Holder - 2xCR2032 (Enclosed)
An enclosed coin cell battery holder for two CR2032 batteries wired in series, delivering up to 6 V output. The holder features a built-in on/off slide switch and two 150 mm (6″) power leads (positive and negative). A secure screw-down enclosure with two Phillips head screws keeps batteries safel...
Inky wHAT (ePaper/eInk/EPD) Yellow/Black/White
The larger display opens up many more possibilities, with significantly more space to display information. Like Inky pHAT, the display is crisp and readable in bright sunlight.Use Inky wHAT as a detailed weather display, as a calendar, for daily news reports, to list household chores, or you coul...
Micro-HDMI to HDMI adapter for Raspberry Pi 4B
If you already have a dual HDMI cable for the Raspberry Pi 3B/3B+ and don't want to waste, you can purchase a Micro-HDMI to HDMI adapter. This adapter is small and does not take up space. The interface is made of 24K gold plated material and highly wear-resistant. It is the "good partner" of Rasp...
Sharp long distance sensor GP2Y0A02YK0F 2Y0A02
The Sharp GP2Y0A02YK0F is an infrared distance measuring sensor with a detection range of 20 to 150 cm. It uses triangulation — combining an infrared emitter (IRED) and a position-sensitive detector (PSD) — to output an analogue voltage proportional to the distance of the detected object. Becaus...
Raspberry Pi Zero 2 WH - with soldered headers
A Raspberry Pi Zero 2 W with a 40-pin GPIO header professionally soldered by our team in Sydney. All the power of the Pi Zero 2 W — ready to use with HATs, pHATs, and breadboards straight out of the box, no soldering required. The Raspberry Pi Zero 2 W features a quad-core 64-bit ARM Cortex-A53 ...
Yahboom Tiny:bit smart robot car for micro:bit
Tiny:bit is a robotic car for the micro:bit education market. It is compact, easy to assemble, and easy to move in tight spaces. The Tiny:bit smart car is based on the micro:bit development board design and uses the online code programming of MakeCode Editor. Rich sensor applications allow Tin...
Raspberry Pi Camera Cable Extension Cable 15cm
Raspberry Pi Camera Cable Extension Cable 15cm
Yahboom HelloBot micro:bit STEM smart robot car
The Yahboom HelloBot is a micro:bit-powered STEM robot car designed for learners aged 10 and up. It can be built in three different configurations — basic, clip, and lift — using simple screwdriver assembly and reverse-connection sockets that make wiring safe and straightforward. Program the Hel...
PLA Filament 1.75mm, 1Kg Roll - Transparent Red
We've finally found the best Transparent Red PLA filament in Australia! This is a 1kg reel of 1.75mm Transparent Red PLA (polylactic acid) plastic filament for 3D printing. PLA is a bioplastic and makes for a great general-purpose filament with smooth surface finish. This filament is very easy to...
ABS Filament 1.75mm, 1Kg Roll - Fluorescent Red
A 1 kg (2.2 lb) reel of 1.75 mm fluorescent red ABS (acrylonitrile butadiene styrene) filament for 3D printing. ABS is a strong, durable general-purpose material suitable for prototypes, functional parts, and enclosures. Key Features High Strength – Durable prints suitable for functional parts...
Raspberry Pi Power Supply (5V 1 Amp) USB Micro
A 5vdc 1A Australian Micro USB power supply is manufactured specifically for use with the Raspberry Pi device. It offers a highly efficient output meeting the latest CEC Stage 2 requirements and is saftey approved. This unit has fixed Australian pins and features short circuit and over ...
Silk-Like PLA Filament 1.75mm, 1Kg Roll - Green
We've finally found the best Reflective Green PLA filament in Australia! This is a 1Kg reel of 1.75mm Reflective Green PLA (polylactic acid) plastic filament for 3D printing. PLA is a bioplastic and makes for a great general-purpose filament with smooth surface finish. This filament is very ...
Yahboom LED:bit dot matrix module for micro:bit
This is a module that integrates two 8x8 dot matrix screens, supporting the display of letters, expressions, patterns, and more. The 4Pin alligator clip interface is designed on the bottom of the dot matrix, the 4Pin pin header interface is designed on the back, and the 4Pin DuPont line interface...
Rainbow PLA Filament 1.75mm, 1Kg Roll - Rainbow
We've finally found the best multi-coloured PLA filament in Australia! This is a 1Kg reel of 1.75mm multi-coloured PLA (polylactic acid) plastic filament for 3D printing. PLA is a bioplastic and makes for a great general-purpose filament with smooth surface finish. This filament is very easy...
Large Alligator Test Leads - 10 Pack 45mm Clip
A pack of 10 large alligator clip test leads with 45 mm spring-loaded clips — bigger than standard clips for easier handling and a more secure grip. Each lead is 50 cm long with a rubber-shrouded alligator clip on each end. The larger clip size works particularly well with the micro:bit edge conn...
Mini 2-Inch 4Ohm 3W Full Range Portable Speaker
Introducing our 2-Inch 4-Ohm 3W Full Range Mini Speaker for Stereo Loudspeaker Box DIY Enthusiasts Unleash the power of crystal-clear sound with our 2-inch 4-ohm 3W Full Range Mini Speaker, the ultimate DIY accessory for audio enthusiasts. Specifications: Impedance: 4 ohms Power Hand...
Arduino Compatible 2 X 16 LCD Controller Module
This Arduino-compatible LCD shield combines a 16×2 character LCD display with a six-button keypad on a single board. The backlit display and built-in navigation buttons (up, down, left, right, select, and reset) make it easy to create user-friendly menus and interfaces for your Arduino projects. ...
ABS Filament 1.75mm, 1Kg Roll - Raw (no pigment)
A 1 kg (2.2 lb) reel of 1.75 mm raw (unpigmented) ABS (acrylonitrile butadiene styrene) filament for 3D printing. This natural, uncoloured filament is ideal when you plan to paint or dye your finished prints. ABS is a strong, durable general-purpose material suitable for prototypes, functional pa...
Yahboom Omniduino smart robot with Mecanum Wheel
Omniduino is a mini omnidirectional robot car with ATmega328P chip as the processor, which can easily achieve 360 ° movement in any direction. 5 pairs of infrared obstacle avoidance sensors are distributed around and in front of it, so that it can identify obstacles in the blind zone, thereby ach...
Arduino Compatible Motor Servo Controller Module
This versatile motor and servo controller shield for Arduino drives up to 4 bidirectional DC motors or 2 stepper motors, plus 2 servos — all from a single board. The 4 onboard H-bridges provide 0.6A per channel (1.2A peak) with thermal protection, and the dedicated servo ports use the Arduino's h...
