All Products
AI Overview
Here are strong matches for a broad “AI” search, grouped by what you’re trying to build.
AI cameras & vision (edge inference / computer vision)
- For Raspberry Pi vision with on-sensor inference: 12.3MP Sony IMX500 Raspberry Pi AI Camera - 12.3MP Sony IMX500 ($172.10) or the more budget-friendly Raspberry Pi AI Camera ($124.43).
- For “teach it by clicking” object/face/line/color recognition via UART/I2C: Gravity: HUSKYLENS - An Easy-to-use AI Vision Sensor ($98.10).
- For an ESP32-based smart camera with 160° IR night vision + mic/speaker and voice-interaction projects: ESP32-S3 AI Camera Module (Edge Image Recognition, Night Vision, ChatGPT Voice Interaction) ($40.15).
AI dev boards & accelerators (run models locally)
- For a low-cost edge AI/HMI platform with Wi‑Fi 6: FireBeetle 2 ESP32-P4 AI Development Kit with Wi-Fi 6 ($34.20).
- For higher-performance robotics/ROS edge AI: 10 TOPS D-Robotics RDK X5 AI Developer Kit - 8GB, 10 TOPS ($418.00) or D-Robotics RDK X5 AI Developer Kit for ROS - 4GB, 10 TOPS ($286.00).
- For adding a dedicated accelerator to a host via M.2 2280 with 25 TOPS: DX-M1 AI Accelerator M.2 Module - 4GB LPDDR5, 25 TOPS ($341.75).
Bundles & learning kits (fast start)
- For a ready-to-run Raspberry Pi 5 setup with accelerator + camera: Raspberry Pi 5 AI & Vision Kit ($759.00).
- For a structured beginner→advanced AI + IoT learning path: UNIHIKER K10 + M10 AI & IoT Learning Kit ($226.38).
- For learning resources focused on practical circuits and experiments: Robotics, Mechatronics, and Artificial Intelligence : Experimental Circuit Blocks for Designers ($113.30).
Voice/Audio AI add-on for Raspberry Pi
- For Raspberry Pi 4 ML projects with built-in audio I/O (incl. stereo mics) and display: Adafruit BrainCraft HAT - Machine Learning for Raspberry Pi 4 ($90.35).
Ultra-compact AI camera dev
- For a small Kendryte K210-based AI camera platform: M5StickV K210 AI Camera (Without Wifi) ($36.05).
What kind of “AI” project are you shopping for?
Collections
Showing 81-100 of 698 products
DIP Sockets Solder Tail - 14-Pin 0.3
A 14-pin DIP IC socket with solder-tail pins and 300 mil (0.3″) row spacing. Solder these into your PCB or perfboard to make DIP ICs easily removable — saving you from desoldering when swapping or replacing chips. Specifications Pin Count – 14 Row Spacing – 300 mil (0.3″ / 7.62 mm) Contact T...
Pixie - 3W Chainable Smart LED Pixel
·
NeoPixels are plenty bright, suuuure. BUT ARE THEY 3 WATTS BRIGHT? No! They are not! That's why you need a Pixie. These chainable smart LEDs are not only super-smart, they are ridonkulously bright with 3W total, compared to 0.2W of a 'standard' NeoPixel. Designed by Ytai Ben-Tsvi, these a...
DIP Sockets Solder Tail - 16-Pin 0.3
A 16-pin DIP IC socket with solder-tail pins and 0.3" (300 mil) row spacing. Solder the socket to your PCB and swap ICs without desoldering — essential for prototyping and development work. Specifications Pin Count: 16 Row Spacing: 0.3" (300 mil) Type: Solder tail Pin Pitch: 0.1" (2.54 mm) ...
Pig-Tail Cables - 0.1 2-pin - 4 Pack
·
You'll find these handy 2-pin 0.1" spacing pig-tails to be quite helpful when wiring up your project. The connector end snaps cleanly into 0.1" spaced header (and fits neatly side by side on 0.1" spacing as well). We think this would be especially useful when paired with our PWM driver breakou...
DIN Rail Generic PCB Holder - 50x80mm
·
This generic DIN rail holder lets you mount PCBs and small modules up to 50 × 80 mm onto standard 35 mm DIN rail. The snap-on design assembles in under a minute and locks securely in place with the included yellow plastic clip. The plastic casing is easy to machine, drill, or cut for custom modi...
Alligator Clip with Pigtail (10 Pack)
A 10-pack of cables with an alligator clip on one end and a bare hookup pigtail (male pin) on the other. These cables make it easy to connect alligator clips directly into breadboards, development boards, and any standard 0.1" pin header. Key Features Alligator Clip to Male Pigtail – Clip one ...
Rubber Wheel for A4WD and A2WD (Pair)
This wheel is used in our most popular A4WD Mobile Platform and 2WD Arduino Mobile Robot Platform. Mounted directly on micro gear motors. Sold in pair. SPECIFICATIONS Outer Diameter: 65mm(2.6'') Wheel Width:26 mm(1'') Hub:6mm(0.2'') DOCUMENTS Gool...
Straight Cross-Lock ESD-Safe Tweezers
·
These straight cross-locking tweezers are designed for precise handling of very small electronic parts. Unlike traditional tweezers, the tips remain closed until you squeeze them open, helping hold components securely while you work.The very fine tip makes them well suited to surface-mount compon...
Crowtail Starter Kit for Raspberry Pi
This Crowtail-Starter Kit for Raspberry Pi will be one of the best kits for you to get started with Raspberry Pi and Python! This kit includes a Crowtail-Base Shield for Raspberry Pi and more than 22 modules like RGB LED, ultrasonic ranging sensor, IR and etc. In addition, this kit provides ri...
Rainbow LED Strip for ring:bit car v2
Ring:bit car V2 lights-bar module is the dedicated module which designed for Ring:Bit Car V2. It brings you beautiful mutiple color with simple assemble.Come with 8 Rainbow full color LEDs. You can update your ring:bit car to a car with headlights and rainbow lights. FeaturesInput voltage 3V...
12-Pin 0.1in Male Straight PTH Header
·
This is a simple 12-pin male straight header for plated through-hole (PTH) connections. It is handy for adding pins to PCBs, breakout boards and other projects that use the standard 0.1 inch header spacing.If you do not need the full 12-pin length, the header can be broken apart into smaller sect...
E-Textiles Rainbow 7 LEDs (6 colours)
The E-Textiles Rainbow LED strip contains seven LilyPad-style sewable LEDs in six colours, connected in a snap-apart strip. Break off individual LEDs as needed and sew them into clothing, accessories, or craft projects using conductive thread. Each LED board has its colour printed on the back fo...
Enviro + Air Quality for Raspberry Pi
Monitor your world with Enviro and Enviro + Air Quality for Raspberry Pi! There's a whole bunch of fancy environmental sensors on these boards, and a gorgeous little full-colour LCD to display your data. They're the perfect way to get started with citizen science and environmental monitoring! ...
.jpg)
RDK X5 Stereo AI Vision Camera Module
·
This binocular depth camera module is designed for the RDK X5 development board, giving AI and robotics projects stereo vision for depth perception, navigation and 3D environment sensing.It uses dual cameras with depth algorithms accelerated by the RDK X5 BPU, helping offload depth computation fr...
Tube - Stainless (1OD x 8.0L x 0.88ID)
An 8″ stainless steel tube for structural support in robotics builds and mechanical projects. The hollow centre allows wires and cables to be routed through the tube, keeping your build tidy. Designed for use with mating tube clamps from the Actobotics system for versatile, adjustable structural...
Strain Gauge Load Cell - 4 Wires - 1Kg
·
A strain gauge is a type of electronic sensor used to measure force or strain (big surprise there). They are made of an insulating flexible backing with a metallic foil pattern. The resistance of a strain gauge changes when force is applied and the object is deformed along with the foil and this ...
3-Pin Male Straight Header - 0.1in PTH
·
This is a straightforward 3-pin male through-hole header for adding standard pin connections to a PCB, breakout board or prototype.The pins use the common 0.1" spacing, making the header suitable for breadboard-friendly layouts and many maker electronics projects.If you do not need all three posi...
3-Pin Male Straight Header - 0.1in PTH
·
A compact straight pin header for adding a simple 3-position male connection to a through-hole PCB or prototyping layout. The pins use the common 0.1" spacing, making it easy to match with many standard electronics projects and mating connectors.If you do not need all three positions, the header ...
Strain Gauge Load Cell - 4 Wires - 5Kg
·
A strain gauge is a type of electronic sensor used to measure force or strain (big surprise there). They are made of an insulating flexible backing with a metallic foil pattern. The resistance of a strain gauge changes when force is applied and the object is deformed along with the foil and this ...
Rainbow Acrylic Case For Raspberry Pi 5
Openings For 40PIN GPIO, PCIe, DSI/CSI Interfaces And Airflow Vents On The Top And For RTC Battery Connector/UART Header On The Side, With Power On/Off Button. Easy To Pull & Plug TF Card On The Bottom Product Show * for reference only, please refer to the Package Content for detailed ...
