All Products
Showing 81-100 of 100 products
CR123A Li-ion Battery Holder for micro: Maqueen
This compact rechargeable power module is designed for micro:bit-based Maqueen educational robots. It holds a single CR123A 3.6V lithium rechargeable battery and provides a tidy power solution for classroom robotics, STEM workshops and small mobile robot projects.A built-in lithium battery chargi...
IR Remote Controller (2-Key)
This compact 2-key infrared remote controller provides a simple ON/OFF wireless input for your projects. Using the standard NEC protocol at 38 kHz, it transmits reliably over 8 metres with a 60° beam angle — perfect for activating robots, toggling devices, or triggering actions from across the ro...
Super Bright Green 5mm LED (25 pack)
·
A pack of 25 super-bright clear green 5 mm LEDs with a narrow 20° beam angle and 8 000 mcd typical brightness. Ideal for indicator lights, breadboard projects, and anywhere a focused, high-intensity green LED is needed. Specifications Quantity – 25 LEDs Diameter – 5 mm Colour – Green (520 nm...
Crack the Code Take-home Set (WITHOUT Uno Board)
The Crack the Code Take-Home Set is an Arduino-compatible electronics kit designed for students to continue learning at home. With the included components, students can build light and sound projects using LEDs, a speaker, sensors, and a breadboard. This kit is ideal as a per-student take-home p...
2x1.2A DC Motor Driver with Gravity Connector (TB6612FNG)
The DFRobot 2×1.2A DC Motor Driver with Gravity Connector is a compact dual-channel motor driver based on the TB6612FNG IC. This version features standard DFRobot Gravity connectors for plug-and-play wiring with Gravity-compatible expansion boards — no soldering or breadboard needed. Each channe...
2x1.2A DC Motor Driver (TB6612FNG)
The DFRobot 2×1.2A DC Motor Driver is a compact dual-channel motor driver based on the TB6612FNG IC. It requires only four GPIO pins to control two DC motors, using the same control logic as the DFRobot L298N motor driver — making existing L298N code directly compatible. Each channel delivers up...
3×AA Battery Holder(PH2.0-2P)
This battery holder connects 3× AA batteries in series, providing approximately 4.5V from alkaline cells. It features a PH2.0-2P connector with a 15cm wire lead, making it compatible with DFRobot boards and other devices that use the PH2.0 power interface. Key Features 3× AA Series Configurati...
DFRobot SEN0704 6x6 Flexible Tactile Pressure Sensor - UART
·
This flexible thin-film array gives robots, wearables and HCI projects a compact way to sense where pressure is being applied. It integrates 36 independent sensing points into a 15 x 15mm active area, enabling real-time pressure distribution mapping instead of a single force reading.The bendable ...
DFRobot 24V 750kg·cm IP65 Brushless Servo with Magnetic Encoder
·
Built for demanding robotics and automation, this industrial servo combines a high-voltage brushless motor, hardened steel gearing and non-contact magnetic encoder feedback for strong, repeatable motion control.At 24V it provides up to 750 kg·cm stall torque, with standard PWM control from 500–25...
Yahboom Uno R3 robot drive expansion board compatible with Arduino
This expansion board is specially designed for the Uno board and can be plugged directly into the Uno board without a cable. Equipped with 4 motor interfaces, 4 servos interface, wifi camera interface, IIC interface, various sensor sockets, etc. It also expand all the pins of Uno board, which is ...
micro:Maqueen Plus V2 (Ni-MH) with Mechanic and micro:bit V2
·
This DFRobot bundle brings together the micro:Maqueen Plus V2 AA robot platform, the micro:Maqueen Mechanic kit and a micro:bit V2 board, giving students a ready-to-build STEM robot set for classroom projects, after-school activities and robot competitions. Batteries are not included.Maqueen Plus...
LED - Basic Yellow 5mm x 100
A standard 5 mm yellow LED — the essential building block for power indicators, status lights, sensor circuits, and blinking displays. Specifications Colour – Yellow Size – 5 mm (T-1 3/4) Forward Voltage – 2.0V typical Forward Current – 20 mA rated Lens – Yellow diffused Ideal For Power...
Yahboom Uno sensor expansion board compatible with Arduino
The Yahboom Uno Sensor Expansion Board is designed to simplify connecting sensors and modules to your Arduino Uno. It plugs directly into the Uno's headers and breaks out all pins to convenient PH2.0 anti-reverse sockets, greatly reducing the chance of incorrect wiring while keeping your setup cl...
Yahboom OmiBox programmable cute robot car compatible with Scratch3.0 and LEGO
This is a programmable robot with a unique box shape, the size is about 100mm*87mm*70mm. The whole vehicle is composed of three PCB boards and three acrylic plates. Two wheels, the universal wheel and the PCB driver board are fixed by rivets, no need screw, no need welding. The three PCB boards a...
Mini Bread Board Self Adhesive - Red
A compact 170-point solderless breadboard with a self-adhesive backing for mounting to project enclosures, robot chassis, or proto shields. The red board measures 46 × 36 mm (1.8 × 1.4″) and is compatible with the Arduino Proto Shield. Key Features 170 Tie Points – 17 × 5 × 2 point layout Sel...
4 x AA Battery Holder with Premium Jumper Header Wires
·
A 4×AA battery holder with premium jumper header wires that plug directly into a breadboard. No stripping or soldering required — just insert the header pins into your breadboard rails and start prototyping with portable battery power. Delivers approximately 4.8V with NiMH rechargeable batteries...
Explorer pHAT
Explorer pHAT is the perfect prototyping side-kick for your Raspberry Pi! A more diminutive version of our popular Explorer Hat Pro, it's cheaper and designed to fit perfectly on a Raspberry Pi Zero! We've added a heap of useful input and output options that will take your ...
4x8 Flexible Tactile Pressure Sensor with UART
·
This flexible tactile pressure sensor gives your project a compact 4 x 8 pressure matrix for mapping contact across a small surface. It integrates 32 independent sensing points in a 20 x 10mm active area, making it useful for robotic grippers, electronic skin, wearable electronics, human-machine ...
Robot Tank Chassis Kit With Motors for Arduino
This DIY Robot Tank Chassis with built-in Shock absorption the perfect base for your next robotics project. Specifications: Motor: 260 Voltage: 3V-9V Weight: 550g Track Width: 2.3cm Size: 30cm x 15cm x 7.6cm Notes: Batteries not included! This may come in the green or brown version Packag...
Gravity: Intermediate(advanced) Kit for Arduino
The DFRobot Gravity Intermediate Kit for Arduino takes you beyond the basics with a comprehensive set of sensors, modules, and an Arduino-compatible board. Starting with simple LED projects and progressing to more complex builds like a mini electronic drum kit, sound-activated LED, and digital di...
