All Products

SKU: DF-SEN0657 · MPN: SEN0657

This all-in-one weather station sensor brings seven key environmental measurements into a single outdoor unit: wind speed and direction, temperature, humidity, atmospheric pressure, light intensity and rainfall.It uses ultrasonic wind sensing, so there are no moving parts in the wind sensor, and ...

SKU: DF-SEN0671 · MPN: SEN0671

Instead of measuring just one dot, the TF-NOVA projects a wide 14° by 1° curtain of laser light to create a continuous line of detection. At 1 metre, that line covers 25cm x 1.7cm, helping automated machines spot thin or awkward obstacles that a single-point sensor may miss.Built on Pulse Time-of...

SKU: DF-FIT0924 · MPN: FIT0924

This compact PH2.0-4P cable is a short female-to-female lead for linking modular electronics hardware without messy excess wiring. It is designed for tidy connections between sensors, actuators and controller boards in close-spaced builds.Each end has a keyed PH2.0-4P female connector to help pre...

SKU: DF-FIT0902 · MPN: FIT0902

This 3-pin PH2.0 male-to-male cable pack provides compact, tidy connections for modular electronics builds. It is designed for use with Boson modules and the UNIHIKER development board, helping you connect sensors, peripherals and expansion modules without soldering.Each cable has keyed PH2.0 3-p...

SKU: DF-DFR1093-868 · MPN: DFR1093-868

Build a private LoRaWAN network for EU868 regions with local processing, dashboarding and automation built in. This indoor gateway combines a Semtech SX1302 8-channel LoRaWAN concentrator with a quad-core Cortex-A35 processor, making it suitable for collecting data from multiple long-range sensor...

SKU: DF-DFR1093-915 · MPN: DFR1093-915

Build a private LoRaWAN IoT network for home automation, environmental monitoring or maker projects without relying on an external cloud service. This indoor gateway includes a built-in SIoT local server and pre-installed Node-RED, so sensor data can be processed locally for dashboards, rules and...

SKU: DF-DFR1120-868 · MPN: DFR1120-868

Build remote monitoring and control systems around a single DIN-rail RTU for EU868 LoRaWAN networks. This 868MHz control terminal is designed for industrial IoT, smart agriculture, building automation and environmental monitoring where long-range wireless telemetry and local device control are ne...

SKU: DF-DFR0767-4 · MPN: DFR0767-4

Turn a Raspberry Pi Compute Module 4 into a compact dual-Gigabit router, gateway or IoT platform with this mini carrier board kit from DFRobot. The board connects a Gigabit network card over PCIe, giving the CM4 two full-speed Gigabit Ethernet ports with lower CPU usage and improved long-running ...

SKU: DF-DFR0767-3 · MPN: DFR0767-3

This kit bundles DFRobot’s compact Compute Module 4 IoT Router Carrier Board Mini with a metal cooling case and heat sink, a 5V@3A USB power supply (US Standard), and a USB 3.0 to Type-C cable. It is designed around the Raspberry Pi Compute Module 4 series for building small, capable network appl...

SKU: DF-DFR0767-1 · MPN: DFR0767-1

This pack combines a Compute Module 4 IoT Router Carrier Board Mini with a metal cooling case and heat sink, giving you a compact platform for building a Raspberry Pi CM4-based router, gateway or IoT hub.The carrier board adds two full-speed gigabit network ports by using PCIe for the second netw...

SKU: DF-DFR1195 · MPN: DFR1195

This ESP32-S3 development board is built for long-range IoT prototyping using LoRa, LoRaWAN and Meshtastic. It can be used for one-to-one LoRa links, one-to-many LoRa communication, standard LoRaWAN networks, or Meshtastic mesh networking.The board is designed to be approachable for makers and de...

SKU: SF-WRL-30678 · MPN: WRL-30678

Built around Espressif’s ESP32-C5-WROOM-1 module, this Thing Plus board gives IoT projects a compact microcontroller platform with dual-band WiFi 6, Bluetooth 5 LE, Zigbee and Thread connectivity. It pairs a 32-bit RISC-V single-core microprocessor with 8MB Flash and 8MB PSRAM for connected proje...

SKU: SF-WRL-17381 · MPN: WRL-17381

Built around Espressif’s ESP32-WROOM-32UE module, this Thing Plus board gives you a compact foundation for connected projects that need WiFi, Bluetooth and a flexible antenna setup. The onboard U.FL connector lets you attach a suitable external antenna for installations where a PCB antenna is not...

SKU: SF-WRL-26060 · MPN: WRL-26060

This development board is designed to make building a LoRaWAN® IoT end node much less fiddly. It combines Digi X-ON™ onboarding with the SparkFun Qwiic ecosystem, so you can connect supported Qwiic sensors and get data moving to the cloud quickly.The board ships with firmware installed that can c...

SKU: SF-KIT-16468 · MPN: KIT-16468

Classroom electronics kits take a beating, especially when they are shared across lessons, workshops and makerspaces. This refill pack is designed to replace the small, commonly lost or worn parts from the SparkFun Inventor's Kit without needing to replace an entire kit.Inside the included protec...

SKU: AF-5603 · MPN: ADA5603

Add a bright numeric display to your project without giving up a pile of microcontroller pins. This assembled Adafruit LED backpack pairs an ultra-bright green 4-digit, 0.56 inch seven-segment display with a driver board that handles the multiplexing for you.The onboard driver chip includes its o...

SKU: DF-SEN0253 · MPN: SEN0253

This compact Gravity module combines a Bosch BNO055 absolute orientation sensor with a BMP280 barometric pressure and temperature sensor to create a 10DOF AHRS module for motion, heading and environmental sensing.The BNO055 integrates a triaxial 14-bit accelerometer, triaxial 16-bit gyroscope, tr...

SKU: DF-FIT0916-MM · MPN: FIT0916-MM

This 5 pack of labelled 4-pin male-to-male DuPont cables is designed to make wiring Gravity modules, breadboards and development boards clearer during prototyping. Each 30 cm cable includes printed I2C and UART pin tags on the wires, helping you identify power, ground and signal lines without rel...

SKU: DF-FIT0898 · MPN: FIT0898

This pack gives you 10 handy 30cm Gravity sensor cables for connecting 4-pin PH2.0 modules to breadboards, IO boards or standard DuPont-style headers.Each cable has a 4-pin PH2.0 plug connector on one end and DuPont male connectors on the other, making it useful for I2C or UART wiring in maker pr...

SKU: DF-FIT0897 · MPN: FIT0897

This pack includes ten 30 cm Gravity analogue sensor cables, each with a 3-pin PH2.0 plug on one end and DuPont male connectors on the other.The cables are compatible with breadboard and DuPont wire spacing, making them handy for connecting DFRobot analogue sensors to an IO Expansion Shield or IO...