All Products

SKU: SF-BOB-13655

The SparkFun 8-Pin SOIC to DIP Adapter is a small PCB that lets you adapt SOIC packages into a DIP footprint. These tiny boards are useful for modding and upgrading devices that use 8-pin DIP ICs, when the upgraded IC is only available in a SOIC footprint. You can also use these adapters for p...

SKU: SF-BOB-00495

A simple breakout PCB that adapts a 20-pin SOIC package IC to standard 0.1″ DIP headers for easy breadboard prototyping. Solder your SOIC chip to the board and plug it straight into a breadboard or socket. Key Features SOIC to DIP Conversion – Use surface-mount ICs on breadboards 20-Pin Layou...

SKU: DF-FIT0323

This 100-piece assortment gives you a handy spread of common through-hole diodes for prototyping, repairs and general project builds. It covers small-signal diodes, standard rectifiers, fast-recovery diodes and Schottky types, making it a useful parts-bin staple.The through-hole format is easy to...

SKU: SF-PRT-08619

An empty canvas for electrical enthusiasts! Designed to fit the SFE project enclosures this project board gives you 8x10cm (3.15x3.94") of building space for through-hole components with 2.54mm (100mil) spaced holes. This is not your normal perf board! This board is much higher quality with pl...

SKU: SF-PRT-08811

A 2" (50 mm) square double-sided perfboard with standard 0.1" (2.54 mm) hole spacing. Features 4-40 (3 mm) mounting holes in the corners for easy installation in enclosures or stacking multiple boards. Specifications Size – 2" × 2" (50 × 50 mm) Hole Spacing – 0.1" (2.54 mm) standard pitch Si...

SKU: AF-2772

The Feather M0 Basic Proto is the no-frills member of the Feather M0 family, built around the ATSAMD21G18 ARM Cortex M0 processor with a built-in prototyping area for soldering on extra components. With 256KB of flash and 32KB of RAM, it provides significantly more processing power than ATmega-ba...

SKU: TB-HP9554

A versatile prototyping board with a doughnut-pad layout for building electronic circuits. Each pad is separated from its neighbours by approximately 0.5 mm, providing electrical isolation while making it easy to bridge solder across pads to create interconnections. The board features edge conne...

SKU: DF-FIT0203

This is a very basic double sided prototyping board with standard 0.1" spacing through holes and four 3mm diameter mounting holes. There are 22x26 holes in total. Great for quickly prototyping stackable circuits. SPECIFICATIONS Size:58mm x 78mm(2.28"x3.07") SHIPPING ...

SKU: AF-2671

These 2 mm pitch 40-pin break-apart male headers are designed for modules and boards that use 2 mm pin spacing instead of the standard 2.54 mm (0.1″) pitch. Each pack includes five 40-pin strips that can be easily snapped apart to your desired length. Gold-plated contacts ensure reliable connect...

SKU: AF-2670

Make your next project as you imagine it with prototyping perfboards that can easily be cut with scissors like these Bakelite Universal Perfboard Plates! We wanted a perfboard that was both customizable and durable and bakelite was the answer. Like most perfboards these plates come o...

SKU: DF-FIT0096-C

A compact 400 tie-point solderless breadboard in a crystal-clear transparent finish, with interlocking edges and self-adhesive backing. The half-size form factor (82 × 62mm) makes it ideal for small projects, and the removable power rails let you slim it down to just 35mm wide for fitting onto Ar...

SKU: DF-FIT0165

An 8-pin female stackable header with extended legs, designed for stacking Arduino shields and prototyping boards. The extra-long pins pass through one board and connect to the next, making it easy to build multi-layer shield stacks. Standard 0.1-inch (2.54mm) pin spacing ensures compatibility w...

SKU: DF-FIT0096

A compact 400 tie-point solderless breadboard with interlocking edges and self-adhesive backing. The half-size form factor (82 × 62mm) makes it ideal for small projects, and the removable power rails let you slim it down to just 35mm wide for fitting onto Arduino protoshields. Multiple boards ca...

SKU: AF-2314

The Adafruit Perma-Proto HAT for Pi Mini Kit with EEPROM is a full-sized prototyping daughter board for any Raspberry Pi with a 2×20 GPIO header. It provides a grid of 0.1″ soldering holes connected in a familiar breadboard pattern, plus a pre-soldered 24C32 I2C EEPROM for self-identifying HAT co...

SKU: PL-2765

The Adafruit Perma-Proto Quarter-Sized Breadboard PCB (3-Pack) provides three compact prototyping boards that bridge the gap between solderless breadboards and permanent soldered circuits. Each board has 15 rows of 5-hole connected pads divided into two blocks (just like a standard breadboard), p...

SKU: AF-2102

This 2×5 (10-pin) IDC breadboard helper makes it easy to connect standard 10-pin IDC ribbon cables to a breadboard or Perma-Proto board. The two-piece design consists of a pin-through socket that straddles the centre of a breadboard and a male header that plugs into the top of the socket. A prac...

SKU: AF-1606

The Adafruit Perma-Proto Full-Sized Breadboard PCB mirrors the layout of a standard full-size solderless breadboard, making it simple to transfer prototyped circuits to a permanent soldered board. With 60 rows of 5-hole connected pads, four power bus rails, and clear silkscreen labelling, your co...

SKU: LB-LR0272

Stock up your parts drawers with this bulk pack of 500 diffused 3mm LEDs. It includes 100 each of red, green, blue, white and yellow LEDs, giving you a handy mix for indicators, models, craft builds and general electronics projects.The diffused lens helps produce a softer, more even light output ...

SKU: AF-1492

Break out those tricky 0.5 mm pitch flex cable connections to breadboard-friendly 0.1" spaced headers with this FPC adapter board. The 50-pin connector on top accommodates most ZIF and snap-style FPC connectors, and each pin is broken out to a standard 0.1" × 0.1" header pad for easy prototyping....

SKU: AF-3904

Make your next project super-flexy with a biiiig prototyping board that can twist and shout– err, twist and bend! This passive flexible proto-PCB is about large as a piece of paper, but instead of dead-trees its made of very thin FR4. We're not bending the truth! This protoboard is only 0.4mm...