All Products
Collections
Showing 61-80 of 100 products
Kitronik Compact Motor Driver Board for the BBC micro:bit
A compact motor driver board for the BBC micro:bit that drives two DC motors or one stepper motor. The integrated edge connector lets the micro:bit slot in directly, with built-in protection against short circuits, overcurrent, and overheating. Power is supplied via terminal block or servo conne...
PD Stepper NEMA 17 USB-C PD Driver and Controller
·
Stepper motor builds often need a microcontroller, a separate driver, a 12V or 24V supply and plenty of wiring. This compact controller from Things by Josh brings that stack together in one unit designed to mount directly to the back of a standard NEMA 17 stepper motor.Power comes in via USB-C Po...
M0601 Direct-Drive Hub Motor, Right Orientation
·
The M0601 is a compact direct-drive hub motor for intelligent mobile robots, AGVs and AMRs. It combines a brushless DC motor, servo driver and high-precision encoder in a single 102mm hub, reducing the need for external motor drivers and complex wiring.Motion control is handled with advanced FOC ...
M0601 Direct-Drive Hub Motor - Left, Integrated FOC Servo
·
The M0601 is a compact direct-drive hub motor for intelligent robots, AGVs, AMRs and other mobile platforms. It combines a brushless DC motor, servo driver and high-precision encoder into a 102mm diameter unit, reducing the need for external drivers and complex wiring.Motion control is handled wi...
DC Gearbox Motor - TT Motor - 200RPM - 3 to 6VDC
These plastic gearbox motors, also known as TT motors, are a simple and affordable way to get a small robot or wheeled project moving.This DC gearbox motor uses a 1:48 gear ratio and includes pre-attached wires with breadboard-friendly 0.1" male connectors, making it easy to plug into a breadboar...
Hobby Motor with Encoder - Plastic Gear (Red)
·
Add motion and feedback to small robotics builds with this single DC gearmotor and integrated Hall effect speed encoder. Instead of simply driving a motor open-loop, your microcontroller can count encoder pulses to track wheel rotation and speed for more accurate navigation and speed control.The ...
12V DC Motor 350RPM w/Encoder (12kg*cm)
A 12V DC gear motor with an integrated quadrature encoder, ideal for mobile robot platforms and closed-loop motor control. The 34:1 gearbox provides a no-load speed of 350 RPM with a stall torque of 12 kg·cm, and the encoder delivers 374 pulses per revolution of the output shaft for precise speed...
2x1A DC Motor Shield for Arduino
The DFRobot 2×1A DC Motor Shield uses the L293 motor driver chip to control two 7–12 V DC motors at up to 1 A per channel. It stacks directly onto Arduino Uno and Arduino Mega boards, using pins 4, 5, 6, and 7 for motor control with PWM speed support. Key Features Dual Motor Drive – Control tw...
Gravity: DC Micro Metal Gear Motor w/Driver - 50:1
INTRODUCTION An ordinary DC motor requires an H Bridge to work with a microcontroller such as an UNO. For newcomers to electronics, the process of finding the right motor driver, connecting it to the MCU and learning the relevant electronic theory can be confusing an...
Gravity: Arduino DC Micro Metal Gear Motor w/Driver - 30:1
INTRODUCTION An ordinary DC motor requires an H Bridge to work with a microcontroller such as an UNO. For newcomers to electronics, the process of finding the right motor driver, connecting it to the MCU and learning the relevant electronic theory can be confusing and frustrating when you ju...
Turbo Metal Gear Worm Motor (12V 40RPM 8kg.cm)
This turbo worm gear motor delivers high torque through a durable metal gearbox with a 1:150 reduction ratio. The worm drive mechanism provides a self-locking output shaft that cannot be back-driven, making it ideal for applications where the load must hold position when the motor is off. Rated ...
TT Motor with Encoder (6V 160RPM 120:1)
INTRODUCTION This is the DFRobot TT Micro DC geared motor with encoder. It is a motor with a 120:1 gearbox and an integrated quadrature encoder that provides a resolution of 16 pulse single per round giving a maximum output of 1920 within one round. With an Arduino cont...
TT Geared Motor with Encoder (6V 160RPM 120:1 L Shape)
INTRODUCTION This is the DFRobot TT Micro DC geared motor with encoder. It is a motor with a 120:1 gearbox and an integrated quadrature encoder that provides a resolution of 16 pulse single per round giving a maximum output of 1920 within one round. With an Arduino controller and motor drive...
Gravity: 130 DC Motor Module
INTRODUCTION This DC motor has an integrated transistor built in to the board, eliminating the need for a motor driver. Use PWM to control it for all your DIY project needs. It uses the 3 pin "gravity" interface saving lots of messy wiring. SPECIF...
Brushless DC Motor with Encoder 12V 159RPM
INTRODUCTION This is a motor revolution: a new DC brushless motor with built-in motor driver. It can be conncected to Arduino directly without external motor driver. Whatsmore, the motor comes with directional control, PWM speed control and speed feedback output, which make this motor t...
Stepper motor - NEMA-17 size - 200 steps/rev, 12V 350mA
A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified to have a max current of 350mA so that it could be driven easily with an Adafruit motor shield for Arduino (or other motor driv...
Stepper Motor: Bipolar, 200 Steps/Rev, 42x38mm, 2.8V, 1.7 A/Phase
A NEMA 17 hybrid bipolar stepper motor with a 1.8° step angle (200 steps per revolution). Each phase draws 1.7 A at 2.8 V, delivering a holding torque of 3.7 kg·cm. Four colour-coded wires with bare leads connect to two coils: black/green for one coil, red/blue for the other. Best driven with a ...
Flotilla - Motor
The Motor module is a 298:1 ratio motor that has full speed control, and is bi-directional. It's perfect for driving robots, as a tiny fan, or in LEGO® projects. We have a LEGO® compatible axle adaptor available too! Features 298:1 ratio motor DRV8830 motor driver ci...
TT Motor All-Metal Gearbox - 1:90 Gear Ratio
These durable (but affordable!) gearbox motors (also known as 'TT' motors) are an easy, low-cost way to get your projects moving. This is a TT DC All-Metal Gearbox Motor with a gear ratio of 1:90 about double of the 'standard' 1:48 ratio. That gives them higher torque but slower...
TT Motor Bi-Metal Gearbox - 1:90 Gear Ratio
These durable (but affordable!) gearbox motors (also known as 'TT' motors) are an easy, low-cost way to get your projects moving. This is a TT DC Bi-Metal Gearbox Motor with a gear ratio of 1:90 about double of the 'standard' 1:48 ratio. That gives them higher torque but slower ...
