All Products

SKU: AF-6449 · MPN: ADA6449

Add reliable real-time clock and programmable power control to a Raspberry Pi with this HAT+ add-on board. Witty Pi 5 can define your Raspberry Pi’s on/off sequence, trigger power actions based on temperature or voltage thresholds, and help reduce overall energy consumption in remote or battery-c...

SKU: SF-KIT-24115 · MPN: KIT-24115

Keep your electronics bench ready for the next enclosure, PCB stack or prototype with this 210-piece brass standoff kit. It covers two common PCB hardware sizes, M3 and M2.5, with a mix of standoff heights, nuts, screws and washers.The assortment includes both female/female and male/female stando...

SKU: SF-LCD-29766 · MPN: LCD-29766

Add a bright 2.8-inch colour display to your Raspberry Pi Pico project with this Pimoroni display pack. It uses a 320×240 pixel IPS LCD driven by an ST7789V controller, giving you a generous active screen area for menus, status displays, dashboards and simple graphics.The board includes four tact...

SKU: SF-PRT-28385 · MPN: PRT-28385

This is a simple single-row female header socket with 14 holes, suitable for standard 0.1 inch prototyping layouts.Use it for removable connections on perfboard, custom PCBs, breakout boards, shields or other maker projects that use 2.54 mm pitch headers.Specifications:Connector type: Female head...

SKU: SF-PRT-28386 · MPN: PRT-28386

This single-row female header socket provides 24 holes for making removable connections on PCBs, stripboard or other maker projects.It uses the common 0.1 inch (2.54 mm) spacing found across many development boards, modules and pin header connections.Specifications:Pin count: 24 pinsNumber of hol...

SKU: SF-PRT-21505 · MPN: PRT-21505

This 12-position screw terminal block is a simple way to make secure wire connections on a PCB or prototyping board. Each position uses a screw clamp, making it handy for bringing external wiring into a circuit without soldering the wire directly to the board.The 3.5mm pitch is designed to line u...

SKU: SF-SPX-21226 · MPN: SPX-21226

This handy kit gives you a simple way to compare and tune the brightness of your own LEDs, helping you avoid a project full of mismatched indicator lights. It was originally designed for side-by-side LED testing and is especially useful when choosing resistor values or learning how brightness cha...

SKU: SF-PRT-28765 · MPN: PRT-28765

This aluminium hex standoff is a compact threaded spacer for stacking and mounting small boards. It is 16.0mm long, measures 4.5mm across the flats, and is tapped through for an M2.5-0.45 screw.It is well suited to mounting pHATs onto Raspberry Pi boards, giving the add-on board a neat, supported...

SKU: SF-PRT-28005 · MPN: PRT-28005

This spacer board gives your FPGA stack a little extra breathing room. It adds 5.6mm of space between stacked boards, helping make room for the included heatsink.It is also handy when you need clearance for cables between the Ft and port 1 on the Hd, keeping your stacked Alchitry setup easier to ...

SKU: SF-PRT-28007 · MPN: PRT-28007

Add a bit of protection and a cleaner finish to your Alchitry board with this standoff hardware. It is designed for use with compatible Alchitry boards, helping lift the PCB off your work surface or enclosure base.The bolts protrude about 2mm below the board, which is just further than the lowest...

SKU: SF-PRT-27882 · MPN: PRT-27882

This adapter lets you use new Alchitry V2 boards with older Alchitry V1 add-on boards. It is designed as a bridge between the updated V2 connector layout and the original V1-style add-on ecosystem.The board has the new style connectors on the bottom for the V2 board, and the old style connectors ...

SKU: SF-PRT-25464 · MPN: PRT-25464

This threaded hex standoff is a simple hardware spacer for mounting circuit boards, panels and small electronics assemblies.It is 0.750 in (19.05 mm) long between boards and tapped for a #4-40 screw, making it useful for lifting a PCB off a workbench or securing it inside an enclosure.Made from a...

SKU: SF-PRT-18704 · MPN: PRT-18704

This compact pure copper heatsink is designed to help draw heat away from small boards and ICs in tight electronics builds.The self-adhesive backing makes it straightforward to attach to a suitable flat component or board area without extra mounting hardware.Features:Self-adhesive: Designed for s...

SKU: AF-2841 · MPN: ADA2841

Add individually addressable RGB plus white lighting to your project with this flexible NeoPixel strip. Each pixel combines red, green, blue and white elements, giving you colourful effects plus a dedicated white channel for brighter white tones.This version is a 1 metre strip with 60 LEDs per me...

SKU: AF-2846 · MPN: ADA2846

Add individually addressable RGB plus white lighting to your project with this flexible NeoPixel strip. Each pixel contains red, green, blue and white LEDs, giving you colourful effects plus a dedicated white channel for brighter, cleaner white output.This version has 60 LEDs per metre, a clear w...

SKU: AF-6016 · MPN: ADA6016

This ultra-high-density NeoPixel strip packs 180 miniature RGB LEDs into a 1 metre length, with a milky silicone bead coating that helps create a smoother, more continuous colour gradient than classic pixel strips.The strip is 10mm wide and supplied on a reel with three 10cm colour-coded wires, a...

SKU: AF-2839 · MPN: ADA2839

Add individually addressable colour and white light to your project with this flexible NeoPixel RGBW LED strip. Each 5050-sized pixel contains red, green, blue and white LED elements, giving you colourful effects plus a dedicated white channel for brighter, cleaner white lighting.This is the 60 L...

SKU: AF-2836 · MPN: ADA2836

Add individually addressable red, green, blue and white pixels to costumes, signs, props and ambient lighting projects. Each NeoPixel contains separate RGB and white emitters, so you can create colourful effects as well as cleaner white highlights from the same flexible strip.This version has a w...

SKU: SF-TOL-20687 · MPN: TOL-20687

Make U.FL connector handling a little less nerve-racking with this compact extraction jig. It is designed to help connect and withdraw tiny U.FL connectors from a seated position, reducing the chance of tearing a surface-mount connector off your board.The L-shaped bending portion hooks onto the c...

SKU: SF-TOL-25937 · MPN: TOL-25937

This wood surfacing cutter is made for CNC work where you want to flatten a wasteboard or put a clean finish on end grain timber projects. Its razor-sharp, indexable carbide tips are suited to making light work of lumber on compatible machines.Each bit comes with 4 indexable inserts, so the cutti...