SparkFun
210-Piece Brass Standoff Kit
· MPN: KIT-24115
Keep your electronics bench ready for the next enclosure, PCB stack or prototype with this 210-piece brass standoff kit. It covers two common PCB hardware si...
Get notified when back in stock
Keep your electronics bench ready for the next enclosure, PCB stack or prototype with this 210-piece brass standoff kit. It covers two common PCB hardware sizes, M3 and M2.5, with a mix of standoff heights, nuts, screws and washers.
The assortment includes both female/female and male/female standoffs, making it useful for spacing boards, mounting modules, building layered assemblies or tidying up a project inside a case.
It is a handy addition to a benchtop organiser, tool drawer or lab kit when you need the right spacer or fastener without hunting through loose parts.
Specifications:
- M3 30mm F/F Standoffs: 10 x 30mm F/F Standoffs
- M3 30mm M/F Standoffs: 10 x 30mm M/F Standoffs
- M3 20mm F/F Standoffs: 10 x 20mm F/F Standoffs
- M3 20mm M/F Standoffs: 10 x 20mm M/F Standoffs
- M3 10mm M/F Standoffs: 10 x 10mm M/F Standoffs
- M3 Nuts: 60 x Nuts
- M3 5mm Screws: 20 x 5mm Screws
- M2.5 10mm M/F Standoffs: 10 x 10mm M/F Standoffs
- M2.5 Brass Nuts: 10 x Brass Nuts
- M2.5 5mm Brass Screws: 10 x 5mm Brass Screws
- M2.5 Nuts: 20 x Nuts
- M2.5 10mm Screws: 10 x 10mm Screws
- M2.5 Brass Washers: 20 x Brass Washers
Jargon buster
Plain-language definitions for the technical terms used above.
- M2.5
- A metric screw thread size with a 2.5 mm nominal diameter. It matters for mounting because screws, standoffs, and holes must use the same size to fit securely without damaging the board.
- PCB
- A printed circuit board (PCB) is a board, usually rigid, with etched copper tracks that connect electronic components together without loose wiring. Components are mounted on the board and signals route between them through the copper layout.
Find this product in
Supplier page — sparkfun.com
Supplier Description · 581.2 KB · Click any page to view full size
