All Products

SKU: AF-936

A panel-mount USB extension cable with a USB-B female jack on one end and a Mini-B male plug on the other. The jack features two mounting ears with pre-installed M3 screws, making it easy to add an external USB port to project enclosures for devices with Mini-B USB connections. Key Features Pa...

SKU: AF-3651

The Adafruit TFT FeatherWing is a 3.5" colour display with a 480×320 resolution, bright 6-LED white backlight, and a built-in resistive touchscreen. It plugs directly into any Adafruit Feather board, giving you a high-resolution colour display with touch input and a microSD card slot for image st...

SKU: AF-899

A compact 6" (approx. 15cm) USB Type-A to Mini-B cable for USB 1.1 and 2.0 connections. Ideal for keeping on the bench when you need a short, tidy cable to connect to Teensy boards, USB LiPo chargers, or other Mini-B devices. Black finish. Key Features Connectors – USB Type-A to Mini-B Length...

SKU: AF-501

This 5V 1A USB power supply provides clean, regulated power for microcontrollers, development boards, and USB-charged devices. It accepts 110–240V AC input and outputs via a USB Type-A port, so you simply plug in whatever USB cable your project needs. The supply is intentionally designed to outp...

SKU: AF-2870

Put on your sunglasses before wiring up this LED matrix — 64 eye-blistering RGBW LEDs adorn the NeoPixel NeoMatrix for a blast of configurable colour and white. Arranged in an 8×8 matrix, each pixel is individually addressable with just one microcontroller pin, delivering 32-bit colour (8-bit PWM...

SKU: AF-2871

Put on your sunglasses before wiring up this LED matrix — 64 eye-blistering RGBW LEDs adorn the NeoPixel NeoMatrix for a blast of configurable colour and white. Arranged in an 8×8 matrix, each pixel is individually addressable with just one microcontroller pin, delivering 32-bit colour (8-bit PWM...

SKU: AF-3975

Drive up to 8 strands of NeoPixels simultaneously with DMA — no more blocking your code to push pixel data. The NeoPXL8 Friend is a standalone level-shifting breakout board that converts 3.3 V logic to 5 V for 8 independent NeoPixel outputs, with a breadboard-friendly form factor that works with ...

SKU: SF-SEN-14844

It’s time to say hip hip array for this IR Breakout! The MLX90640 SparkFun IR Array Breakout is equipped with a 32x24 array of thermopile sensors creating, in essence, a low resolution thermal imaging camera. With this breakout you can detect surface temperatures from many feet away with an accur...

SKU: SF-SEN-14843

It’s time to say hip hip array for this IR Breakout! The MLX90640 SparkFun IR Array Breakout is equipped with a 32x24 array of thermopile sensors creating, in essence, a low resolution thermal imaging camera. With this breakout you can detect surface temperatures from many feet away with an accur...

SKU: AF-4677

The ESP-PSRAM64H is a 64 Mbit (8 MB) serial pseudo SRAM chip in a compact SOIC-8 package. It provides fast, unlimited read/write external memory for microcontrollers like the ESP32 and Teensy 4.1, which have dedicated PSRAM pads or memory-mapping support for seamless integration. Unlike flash or...

SKU: AF-4732

The 64×64 RGB LED Matrix with 3mm pitch features 4096 bright RGB LEDs in a 192×192mm panel. This high-density display offers a good balance between pixel density and panel size, suitable for indoor signage and video wall applications. This panel uses a non-standard 5-address (ABCDE) multiplexing...

SKU: AF-4763

These little chips are like miniature SSD drives for your electronics. When you don't need something with as much storage as a micro SD card, but an EEPROM is too small, SPI (or QSPI) Flash chips give you on-the-order-of megabytes, with little cost and complexity. We use these chips all the time ...

SKU: AF-4741

The Adafruit Grayscale 1.5" OLED Display delivers 128×128 pixels with 16 levels of grayscale on a crisp, high-contrast OLED panel. Driven by the SSD1327 controller, it connects via I²C or SPI and includes STEMMA QT / Qwiic connectors for solderless I²C hookup. An on-board 3.3V regulator and 12V b...

SKU: AF-5297

The Adafruit Monochrome 1.12" OLED Display packs a 128×128 pixel resolution into a compact screen with the high contrast and crisp readability that OLED technology is known for. Each of the 16,384 white pixels is individually addressable, producing sharp text and graphics with no backlight requir...

SKU: AF-5362

The 64×64 RGB LED Matrix Panel with 2mm pitch packs 4096 bright RGB LEDs into the most pixel-dense panel in the 64×64 range. With the tightest spacing available, this panel produces exceptionally sharp, detailed images for very close-up indoor viewing. This panel uses a non-standard 5-address (A...

SKU: AF-5407

The 64×64 RGB LED Matrix Panel with 45° Curb-Cut corners and 2.5mm pitch features 4096 bright RGB LEDs in an ultra-high-density panel. The curb-cut corners are angled at 45°, allowing multiple panels to be assembled into LED video cubes or rectangular enclosures with seamless edges. This panel u...

SKU: AF-5409

PIXIE CHROMA is a dual-5x7 character display for Arduino that can be easily chained to create easy-to-use displays as long or tall as you'd like!Each PCB features 70 addressable WS2812-compatible RGB LEDs in two side-by-side 5x7 grids that can display numbers and characters. Each Pixie Chroma ca...

SKU: AF-5708

The Adafruit CAN Pal is a CAN bus transceiver breakout for microcontrollers that have a native CAN peripheral. It converts 3.3V logic-level CAN TX/RX signals to the differential signalling required for the CAN bus. This is a transceiver only — it does not include a CAN controller, so your microco...

SKU: PH-105560 · MPN: 105560

A USB-C to Micro-USB cable for connecting Micro-USB development boards and devices to modern USB-C laptops and chargers. Ideal for programming boards like the Raspberry Pi Pico, Teensy 4.1, Circuit Playground Express, DFRobot Beetle, Maker UNO, and other Micro-USB devices. Specifications Conne...