All Products

SKU: DF-FIT0210

A pack of 50 crimp pins for 2.54 mm (0.1″) pitch female housing connectors. Use these pins with a crimping tool and compatible housings to create custom cables that mate with standard 2.54 mm male header pins. Specifications Pitch – 2.54 mm (0.1″) Type – Female crimp pin for DuPont-style hous...

SKU: PL-2669

This triple-row, 120-pin (3×40) right-angle male header strip with 0.1" (2.54mm) pitch is a versatile connector for electronics projects. The breakaway design lets you snap or cut it into any triple-row length you need, and the right-angle orientation is ideal for low-profile connections where ve...

SKU: PL-2705

This single-row, 5-pin right-angle female header with 0.1" (2.54mm) pitch is designed to mate with standard 0.1" male headers. The right-angle orientation routes connections parallel to the board surface, making it ideal where vertical clearance is limited. The compact 5-pin length is commonly u...

SKU: PL-2706

This single-row, 6-pin right-angle female header with 0.1" (2.54mm) pitch is designed to mate with standard 0.1" male headers. The right-angle orientation routes connections parallel to the board surface, making it ideal where vertical clearance is limited. The 6-pin length is commonly used for ...

SKU: AF-2222

Connect your own PCB to a Raspberry Pi B+ with this normal-height female header.  The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has 3mm of pins, compared with our stacking version which is the same base height but ...

SKU: AF-1542

These single-row right-angle female headers with 0.1" (2.54mm) pitch are an essential building block for electronics projects. Use them to add right-angle socket connections to perfboards, PCBs, and prototyping setups — they accept 22AWG wire or standard male header pins. Each header is 36 pins ...

SKU: AF-3859

A 4×AA battery holder with premium jumper header wires that plug directly into a breadboard. No stripping or soldering required — just insert the header pins into your breadboard rails and start prototyping with portable battery power. Delivers approximately 4.8V with NiMH rechargeable batteries...

SKU: AF-3893

The JST PH 3-Pin to Male Header Cable converts a JST PH 3-pin connector into three individual colour-coded wires, each terminated with a 0.1" (2.54 mm) male header pin. It's ideal for extending sensor or LED connections to a breadboard or development board. At 200 mm long, this cable provides en...

SKU: AF-3955

This 200 mm cable converts a JST PH 4-pin connector into four individual wires with 0.1″ (2.54 mm) male header pins on the end. It's designed for connecting STEMMA and Grove I²C boards to breadboards, socket headers, or any standard 0.1″ pitch connection. Key Features JST PH to Male Headers – ...

SKU: AF-3907

A colour-coded 2×20 pin header for the Raspberry Pi Zero and Zero W that makes it easy to identify pin functions at a glance. Each pin group is colour-coded so you can quickly find power, ground, and GPIO pins without counting or consulting a pinout diagram. Colour Coding Red – 5 V Yellow – 3...

SKU: PR-PP210029

A handy tool for cleanly snapping break-away header pins to the exact length you need. Insert the header strip, align to the numbered markings (1–16 pins), and bend the exposed pins to snap them off. Works with both straight and right-angle headers by flipping the tool over. Key Features 1–16 ...

SKU: LB-2x40-BLUE

This double-row, 80-pin (2×40) straight male header strip with 0.1" (2.54mm) pitch is a versatile connector for electronics projects. The breakaway design lets you snap or cut it into any dual-row length you need. The blue colour makes it easy to colour-code sections of your project. Standard 0....

SKU: LB-LR0293-12

A 40-pin ribbon of female-to-male (F/M) jumper wires, 30cm long, in ten rainbow colours. The wires fit standard 0.1″ (2.54mm) pitch headers and can be kept as a ribbon for neat harnesses or separated into individual jumpers. Key Features Female-to-Male (F/M) – 0.1″ female header on one end, ma...

SKU: LB-LR0293-11

A 40-pin ribbon of female-to-female (F/F) jumper wires, 30cm long, in ten rainbow colours. The wires fit standard 0.1″ (2.54mm) pitch headers and can be kept as a ribbon for neat harnesses or separated into individual jumpers. Key Features Female-to-Female (F/F) – 0.1″ female header contacts o...

SKU: SF-DEV-11021

The Arduino Uno R3 is the most popular Arduino board and an ideal starting point for learning electronics and programming. Built around the ATmega328 microcontroller, it offers a robust platform for prototyping, interactive projects, and connecting to sensors, actuators, and other hardware. The ...

SKU: LB-LR0293-13

A 40-pin ribbon of male-to-male (M/M) jumper wires, 30cm long, in ten rainbow colours. The wires fit standard 0.1″ (2.54mm) pitch headers and can be kept as a ribbon for neat harnesses or separated into individual jumpers. Key Features Male-to-Male (M/M) – 0.1″ male header pins on both ends 4...

SKU: LB-00349

The Raspberry Pi Zero W Basics Kit includes the Pi Zero W single-board computer along with essentials to get started. The Pi Zero W adds built-in WiFi and Bluetooth to the compact Pi Zero form factor, making it ideal for lightweight IoT projects, headless servers, and embedded applications. Key ...

SKU: PR-PIM557

This SHIM provides a convenient way of powering your Raspberry Pi Pico from a LiPo/LiIon battery. You can recharge the battery easily by providing power to the Pico's USB port. Solder this neat little square to the pins on the back of your Pico, plug in a suitable lithium-ion/polymer battery ...

SKU: LB-00160

A 40-pin ribbon of male-to-male (M/M) jumper wires, 15cm long, in ten rainbow colours. The wires fit standard 0.1″ (2.54mm) pitch headers and can be kept as a ribbon for neat harnesses or separated into individual jumpers. Key Features Male-to-Male (M/M) – 0.1″ male header pins on both ends 4...

SKU: PR-PIM374

This crisp 1.12″ monochrome OLED breakout features a 128×128 pixel white-on-black display, ideal for adding graphing, readouts, and basic icons to your project. OLEDs deliver excellent contrast and brightness, and this compact module fits easily into space-constrained builds. The breakout connec...