All Products

SKU: DF-SEN0233

A multifunction air quality monitor that measures particulate matter (PM2.5), formaldehyde concentration, temperature, and humidity. It uses laser scattering to detect suspended particles in the air, an electrochemical probe for formaldehyde detection, and an integrated sensor for temperature and...

SKU: SF-DEV-17514

The Alchitry Au+ is the upgraded version of the Alchitry Au, featuring the more powerful Xilinx Artix 7 XC7A100T FPGA with over 100,000 logic cells — nearly 3× the capacity of the standard Au. It also includes 256MB of DDR3 RAM, a Qwiic connector for I2C integration, and all the same expandabilit...

SKU: SF-DEV-27874 · MPN: DEV-27874

The Alchitry Au V2 is a powerful FPGA development board built around a Xilinx Artix 7 device. It is aimed at engineers, students and makers who are ready to move beyond microcontroller-style programming and into field-programmable gate arrays.The board breaks out 104 IO pins across two headers an...

SKU: SF-DEV-27876 · MPN: DEV-27876

The Br V2 is a simple breakout board for Alchitry boards, making the signal pins on the Alchitry headers easier to access for prototyping, wiring and soldered projects.All signal pins are brought out to 0.1" easy-to-solder holes, so you can connect jumper wires, headers or your own circuitry with...

SKU: SF-PRT-28008 · MPN: PRT-28008

This header set gives you the female headers needed to populate the prototyping area on an Alchitry Br Wide V2 Board. It includes four 2x14 headers and two 2x6 headers, all with 0.1"-spaced pins.The headers line up with the broken-out holes in the Br prototyping area, making it easier to connect ...

SKU: SF-DEV-27877 · MPN: DEV-27877

The Br V2 is a breakout board for Alchitry headers, giving you access to all the signal pins through solder-friendly 0.1" holes. It is designed to make wiring, prototyping and adding your own circuitry easier when working with an Alchitry board.This is the wide version, recommended for most uses ...

SKU: SF-DEV-16526

The Alchitry Cu is an affordable FPGA development board featuring the Lattice iCE40 HX with 7,680 logic cells. This SparkFun version adds a Qwiic connector for easy I2C sensor and actuator integration. It can be programmed using entirely open-source tools via Project IceStorm. The Cu provides 79...

SKU: SF-DEV-27875 · MPN: DEV-27875

The Alchitry Cu V2 is an accessible FPGA development board for getting started with field-programmable gate arrays without stepping up to a higher-power board. It keeps the Cu concept in the newer Alchitry V2 format, with a smaller board and updated connectors.At its core is a Lattice iCE40 HX FP...

SKU: SF-PRT-28006 · MPN: PRT-28006

Keep an FPGA board running cooler with this compact Alchitry Fn V2 cooling add-on. It uses a blower-style fan to force fresh air over the FPGA, helping manage heat in projects where the logic is working hard.The board also includes an oversized heatsink that attaches to the FPGA for extra thermal...

SKU: SF-DEV-17526

The Alchitry Ft is a high-speed Element board that adds a USB 3.0 interface to your Alchitry FPGA stack. It provides up to 200MB/s data transfer via its USB-C connector, enabling high-bandwidth communication between your FPGA and a host computer. The Ft Element features four 50-pin board-to-boar...

SKU: SF-DEV-27880 · MPN: DEV-27880

The Ft V2 is designed for Alchitry projects that need to move a lot of data in or out of a design. It is built around the FT600Q, which is capable of up to 200MB/s.In real-world use, bandwidth will be a little lower; the supplier notes they have achieved about 190MB/s from the Ft. This makes it a...

SKU: SF-DEV-27879 · MPN: DEV-27879

Add HDMI connectivity to your Alchitry Au or Pt FPGA setup with this expansion board. It provides two micro HDMI ports for video-related projects and FPGA experiments.Each HDMI port can be configured as either a source or a sink using solder jumpers, giving you flexibility when building display, ...

SKU: SF-DEV-27878 · MPN: DEV-27878

The Io V2 is an Alchitry Element Board designed for learning and experimenting with digital design on Alchitry Au and Cu FPGA development boards. It keeps the same beginner-friendly controls and indicators as the original Io, now in the Alchitry V2 form factor.On-board interactive hardware includ...

SKU: SF-DEV-27873 · MPN: DEV-27873

This is a platinum-tier FPGA development board designed for high-speed performance in compact builds. Its low-profile backside has no components taller than 1.5mm, enabling the use of high-speed 1.5mm stack-height DF40 connectors for GTP-capable interfaces such as PCIe 2.0.At the centre is a Xili...

SKU: SF-PRT-28005 · MPN: PRT-28005

This spacer board gives your FPGA stack a little extra breathing room. It adds 5.6mm of space between stacked boards, helping make room for the included heatsink.It is also handy when you need clearance for cables between the Ft and port 1 on the Hd, keeping your stacked Alchitry setup easier to ...

SKU: SF-PRT-28007 · MPN: PRT-28007

Add a bit of protection and a cleaner finish to your Alchitry board with this standoff hardware. It is designed for use with compatible Alchitry boards, helping lift the PCB off your work surface or enclosure base.The bolts protrude about 2mm below the board, which is just further than the lowest...

SKU: SF-PRT-27882 · MPN: PRT-27882

This adapter lets you use new Alchitry V2 boards with older Alchitry V1 add-on boards. It is designed as a bridge between the updated V2 connector layout and the original V1-style add-on ecosystem.The board has the new style connectors on the bottom for the V2 board, and the old style connectors ...

SKU: SF-SEN-08880

The MQ-3 is an alcohol gas sensor suitable for detecting alcohol concentration in the air, similar to a breathalyser. It provides an analog resistive output based on alcohol concentration, with high sensitivity and fast response time. The drive circuit is simple — just one resistor is needed, and...

SKU: PL-1634

The MQ-3 is a semiconductor gas sensor that detects alcohol vapour at concentrations from 0.04 mg/L to 4 mg/L — a range suitable for building a breathalyser. It provides a simple analog voltage output that requires only one analog input pin from your microcontroller. Key Features Alcohol Detec...

SKU: LB-LR0205

An alcohol sensor module for Arduino with both digital (TTL) and analog output. It detects alcohol vapour in the 10–1000 PPM range, with analog output voltage increasing proportionally with concentration. The module also responds to LPG, natural gas, city gas, and smoke. The board features a pow...