Little Bird
Raspberry Pi Zero 2 W with 64GB Noobs
Get started quickly with the Raspberry Pi Zero 2 W bundled with a pre-loaded 64GB microSD card. The card comes with NOOBS (New Out Of Box Software), so you c...
Get started quickly with the Raspberry Pi Zero 2 W bundled with a pre-loaded 64GB microSD card. The card comes with NOOBS (New Out Of Box Software), so you can choose and install your preferred operating system on first boot — no separate computer required for setup.
The Pi Zero 2 W packs a quad-core 64-bit processor, Wi-Fi, and Bluetooth into the same compact form factor as the original Pi Zero, delivering significantly more performance for IoT projects, lightweight servers, and embedded applications.
Key Features
- Quad-Core CPU – 1 GHz 64-bit ARM Cortex-A53 for a major speed boost over the original Zero
- 512 MB RAM – LPDDR2 DRAM
- Wireless Connectivity – 802.11 b/g/n Wi-Fi and Bluetooth 4.2 / BLE
- HAT-Compatible – 40-pin GPIO header (unpopulated)
- Video Output – Mini HDMI port; composite video via solder test points
- Camera Support – CSI camera connector for Pi camera modules
- Compact Size – 65 × 30 mm, weighing just 10 g
Specifications
- SoC – Broadcom BCM2710A1 (quad-core Cortex-A53 @ 1 GHz)
- GPU – VideoCore IV
- Memory – 512 MB LPDDR2
- Wireless – 802.11 b/g/n, Bluetooth 4.2 / BLE
- Storage – microSD card slot
- Ports – Mini HDMI, USB 2.0 OTG (Micro USB), Micro USB power
- GPIO – 40-pin HAT-compatible header
- Dimensions – 65 × 30 × 5.2 mm
- Weight – 10 g
Ideal For
- IoT and home automation projects
- Lightweight headless servers (Pi-hole, media streaming)
- Embedded and wearable computing
- Learning Linux and programming
Package Contents
- 1× Raspberry Pi Zero 2 W
- 1× 64 GB microSD card with NOOBS pre-loaded
Resources
Jargon buster
Plain-language definitions for the technical terms used above.
- Arm Cortex-A53
- A 64-bit Arm processor core commonly used in Linux-capable embedded boards. It matters because it is suited to higher-level computing tasks such as networking, graphics, and running multiple applications.
- BLE
- BLE stands for Bluetooth Low Energy, a Bluetooth mode designed for lower power use and modern phone compatibility. It matters because BLE support can make the module easier to use with Apple devices and battery-powered projects, though it may behave differently from classic serial Bluetooth.
- GPIO
- General-purpose input/output pins are microcontroller pins you can set in software to read signals, switch devices on and off, or connect to peripherals. The number of GPIO pins matters because it limits how many buttons, LEDs, sensors, and other parts you can wire directly to the board.
- HDMI
- HDMI is a common digital video and audio connection used by computers, media players, and many displays. If a display kit has HDMI input, it is usually much easier to test with a single-board computer because it can act like a normal monitor.
- IoT
- Short for Internet of Things, meaning physical devices that connect to networks or the internet to send data or be controlled remotely. It matters if you want projects such as connected sensors, remote controls or classroom data-logging activities.
- microSD card
- A microSD card is a small removable memory card used to store files such as audio tracks. For this product, the card is where the sound files live, so its capacity and formatting can affect how many sounds you can use.
- RAM
- RAM is temporary memory used while a device is running, and its contents are lost when power is removed. A “Run in RAM” mode is useful for testing settings without permanently programming the module, but it may not support every feature.
Find this product in
Raspberry Pi
