Sensors & Input

SKU: DF-SEN0475 | Brand: DFRobot

Measure hydrogen fluoride concentration with a factory-calibrated electrochemical probe that supports analogue, I2C and UART output modes. It is designed for quickly building an HF concentration detector for industria...

SKU: DF-SEN0469 | Brand: DFRobot

This calibrated gas sensor measures ammonia concentration in the environment using an electrochemical probe. It supports three output modes — analogue, I2C and UART — so it can slot into a wide range of microcontrolle...

SKU: SF-GPS-23288 | Brand: SparkFun

Bring high-precision GNSS positioning to your project with the u-blox NEO-F9P engine and dual-band L1/L5 reception. L5 signals sit in the protected ARNS band, helping reduce RF interference and improve reliability in ...

SKU: SF-GPS-26620 | Brand: SparkFun

Built around the Quectel LG290P, this compact RTK GNSS breakout is designed for high-precision positioning projects that need quad-band, multi-constellation reception. It follows the same board dimensions, pin layout ...

SKU: SF-GPS-22693 | Brand: SparkFun

This high-precision GNSS breakout is built around the u-blox ZED-F9R, combining RTK positioning with Automotive Dead Reckoning (ADR) sensor fusion. It fuses a 3D IMU sensor, wheel ticks, a vehicle dynamics model, corr...

SKU: SF-GPS-28019 | Brand: SparkFun

This high-precision positioning breakout is built around the Quectel LG580P GNSS module, giving projects centimetre-level RTK positioning plus instantaneous heading when used with two GNSS antennas. Unlike systems tha...

SKU: SF-WRL-24738 | Brand: SparkFun

This UHF RFID reader brings long-range, multi-tag RFID reading and writing to embedded projects, desktop testing and inventory-style applications. Built around the JADAK M7E Hecto module, it works with standard EPCglo...

SKU: DF-SEN0704 | Brand: DFRobot

This flexible thin-film array gives robots, wearables and HCI projects a compact way to sense where pressure is being applied. It integrates 36 independent sensing points into a 15 x 15mm active area, enabling real-ti...

SKU: DF-SEN0646 | Brand: DFRobot

This ultra-compact dToF laser ranging sensor uses 940nm laser pulses to measure distance up to 7.8 metres with typical ±4cm accuracy. It is designed for precise, real-time ranging in compact robotics, drone, IoT and a...

SKU: SF-GPS-29469 | Brand: SparkFun

This SparkPNT Flex board combines Quectel's LG290P quad-band RTK GNSS receiver with the Feyman (FMI) IM19 IMU, providing centimetre-level positioning with tilt compensation and anti-jamming performance for demanding n...

SKU: SF-GPS-28997 | Brand: SparkFun

This GNSS Flex board combines a u-blox ZED-X20P all-band RTK GNSS receiver with a Feyman IM19 IMU, giving compatible carrier boards centimetre-level positioning plus compensated attitude data for demanding navigation ...

SKU: SF-GPS-29363 | Brand: SparkFun

This swappable GNSS Flex board pairs a Septentrio mosaic-G5 P3 GNSS receiver with a Feyman IM19 IMU for high-precision positioning, attitude measurement and dead reckoning in compact systems. It is suited to autonomou...

SKU: SF-SEN-30942 | Brand: SparkFun

Built around DYscan's DE2290D module, this SparkFun breakout brings 1D and 2D barcode scanning to USB and embedded projects. It uses CMOS image recognition with a 300,000-pixel global shutter camera, giving it the abi...

SKU: DF-TEL0163 | Brand: DFRobot

The A7670G is a global 4G CAT1 communication module that brings cellular connectivity to your IoT projects. With support for LTE-FDD, LTE-TDD, and GSM bands worldwide, it provides reliable data transmission at up to 1...

SKU: EC-DPI32110W | Brand: Elecrow

ESP32-S2-WROVER and ESP32-S2-WROVER-I use ESP32-S2 chip. The ESP32-S2 chip is equipped with an Xtensa® 32-bit LX7 single-core processor with a working frequency of up to 240 MHz. The user can turn off the power of the...

SKU: EC-CRF16500R | Brand: Elecrow

This product has been used in building intercom and access control products for many years, it has high stability and strongest anti-interference ability. The ATMEGA8 of this module is a high- performance AVR MCU of A...

SKU: EC-CCF32323S | Brand: Elecrow

The ESP32S is a WiFi and Bluetooth combo module built around the Espressif ESP32 dual-core processor. It supports 802.11 b/g/n WiFi with speeds up to 150 Mbps and Bluetooth v4.2 (both Classic and BLE), making it a ver...

SKU: EC-CCW08266F | Brand: Elecrow

ESP-12F WiFi module is a security technology developed by Letter to the module integrated core processor ESP8266 smaller package size tensilica L106 industry-leading ultra low power 32-bit MCU micro, with the 16 co...

SKU: EF-EF03081 | Brand: ElecFreaks

The NFC/RFID breakout based on PN532, which is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and...

SKU: SF-SEN-14351 | Brand: SparkFun

The SparkFun AS7263 breakout brings near-infrared (NIR) spectroscopy to your microcontroller projects. The sensor measures six discrete NIR wavelengths, allowing you to characterise how different materials absorb and ...