Elecrow
RFID Reader Module
All Products
Breakouts
New Arrivals
NFC & RFID Sensors
Sensors
Arduino
Brands and Manufacturers
Elecrow
NFC & RFID
Sensors & Modules
Sensors & Input
Connectivity
Prototyping & Wiring
$14.63
|
In stock
This product has been used in building intercom and access control products for many years, it has high stability and strongest anti-interference ability. Th...
Estimated Delivery
Arrives
Disclaimer
Secure checkout
This product has been used in building intercom and access control products for many years, it has high stability and strongest anti-interference ability. The ATMEGA8 of this module is a high- performance AVR MCU of AVR family. It’s easy to use and small enough to be embedded into your system. It will perform well in your projects.
Features
- Wiegand 26/34 optional
- Wiegand data output and the uart ID output simultaneously, baud rate 9600/19200 optional.
- Four mounting holes, can be installed on your product (can be customized according to customer size).
- The coil can swap, in the actual use, the replacement device does not require effort to dismantle the coil.
- Use an external crystal
- Lighting instructions
- A square coil, more suitable for use in building intercom, access control and other products.
- SMT machine batch processing.
Specification
- Support card type: Read-only ID card (EM4100 / 4001, etc.)
- Support card Frequency: 125K
- Read Range: 3-10CM
- Reader Time: Less than 0.2 seconds
- Output interface: Wiegand 26/34 optional; UART serial output, TTL level (selectable baud rate)
- Relative Humidity( Work): 20% -90% RH
- Relative Humidity(Storage): 10% -90% RH
- Environmental temperature requirements:-55℃ - 125℃
- Standard size: 29MM * 62MM
- Coil size: 35MM * 54MM
- Coil lead: 10CM
Jargon buster
Plain-language definitions for the technical terms used above.
- AVR
- AVR is a family of 8-bit microcontrollers used in many classic Arduino-style boards. If a USB host library mentions AVR support, it suggests the examples or compatibility may be aimed at those older microcontroller boards.
- baud
- Baud is the signalling rate of a serial connection, often used as the speed setting for UART communication. Matching the baud rate matters because both connected devices must use the same setting for readable data.
- UART
- UART is a simple serial connection that sends data over separate transmit and receive wires, often labelled TX and RX. It matters because this module is designed to replace a wired UART cable with a wireless link while keeping the same serial data format.
Find this product in
Brands
Sensors & Input
Related Tutorials
Free guides on learn.littlebird.com.au
