Raspberry Pi

SKU: SF-COM-28236 | Brand: SparkFun

This add-on board solves a common Raspberry Pi Pico HAT problem: fixed orientation. It takes the standard pinout for a Raspberry Pi Pico development board and flips it as if the Pico had been physically rotated over, ...

SKU: DF-DFR0767-2 | Brand: DFRobot

This compact kit provides a networking carrier platform for the Raspberry Pi Compute Module 4 series, suited to embedded routing, gateway and edge networking projects. It is designed for dual-gigabit networking using ...

SKU: DF-DFR0767-3 | Brand: DFRobot

This kit bundles DFRobot’s compact Compute Module 4 IoT Router Carrier Board Mini with a metal cooling case and heat sink, a 5V@3A USB power supply (US Standard), and a USB 3.0 to Type-C cable. It is designed around t...

SKU: DF-DFR0767-4 | Brand: DFRobot

Turn a Raspberry Pi Compute Module 4 into a compact dual-Gigabit router, gateway or IoT platform with this mini carrier board kit from DFRobot. The board connects a Gigabit network card over PCIe, giving the CM4 two f...

SKU: DF-DFR0767-1 | Brand: DFRobot

This pack combines a Compute Module 4 IoT Router Carrier Board Mini with a metal cooling case and heat sink, giving you a compact platform for building a Raspberry Pi CM4-based router, gateway or IoT hub.The carrier b...

SKU: DF-SEN0705 | Brand: DFRobot

This flexible tactile pressure sensor gives your project a compact 4 x 8 pressure matrix for mapping contact across a small surface. It integrates 32 independent sensing points in a 20 x 10mm active area, making it us...

SKU: DF-SEN0704 | Brand: DFRobot

This flexible thin-film array gives robots, wearables and HCI projects a compact way to sense where pressure is being applied. It integrates 36 independent sensing points into a 15 x 15mm active area, enabling real-ti...

SKU: DF-SEN0651 | Brand: DFRobot

This compact AI camera module brings on-board vision inferencing to Raspberry Pi projects using the Sony IMX500 Intelligent Vision Sensor. It combines a 12.3-megapixel CMOS image sensor with integrated AI processing, ...

SKU: DF-SEN0671 | Brand: DFRobot

Instead of measuring just one dot, the TF-NOVA projects a wide 14° by 1° curtain of laser light to create a continuous line of detection. At 1 metre, that line covers 25cm x 1.7cm, helping automated machines spot thin...

SKU: DF-SEN0646 | Brand: DFRobot

This ultra-compact dToF laser ranging sensor uses 940nm laser pulses to measure distance up to 7.8 metres with typical ±4cm accuracy. It is designed for precise, real-time ranging in compact robotics, drone, IoT and a...

SKU: DF-DFR0910 | Brand: DFRobot

This 10.1-inch capacitive touchscreen is a Raspberry Pi-based industrial screen packaged for use in Linux-driven industrial environments. It supports LVDS multi-touch with a 1280*800 image resolution and a 16:9 format...

SKU: SF-PRT-30977 | Brand: SparkFun

This cover is a dedicated mounting accessory for compatible Akasa fanless Raspberry Pi enclosures. It replaces or supplements the standard enclosure panel so the case can be attached to the back of a display or anothe...

SKU: SF-CAB-28269 | Brand: SparkFun

This single-port 30W PoE+ injector lets you send power and data to a PoE-enabled Raspberry Pi over one Ethernet cable. It is intended for Raspberry Pi single board computers from the Raspberry Pi 3B+ onwards, excludin...

SKU: SF-PRT-29327 | Brand: SparkFun

Build a neater, sturdier Raspberry Pi stack with this hardware kit for mounting a standard Pi HAT. It is designed for Raspberry Pi 3, 4 and 5 boards, including builds where a larger cooling fan or heat sink needs extr...

SKU: SF-WRL-19959 | Brand: SparkFun

Built around the Raspberry Pi RP2040, this development board adds 2.4 GHz WiFi connectivity via the WizFi360, making it a compact platform for IoT solution development.The board is pin compatible with the Raspberry Pi...

SKU: SF-CAB-28303 | Brand: SparkFun

This flat flexible cable is a compact 22-pin FPC lead for joining compatible boards and peripherals where space is tight. It has a 0.5mm pitch and a 100mm length, making it suitable for short internal connections.The ...

SKU: SF-PRT-21570 | Brand: SparkFun

This tall 2x20 female header is designed to extend the reach of boards using the standard 2x20 GPIO pin footprint, including Raspberry Pi, Google Coral and NVIDIA Jetson boards.It can also be soldered onto Pi HATs tha...

SKU: SF-PRT-28765 | Brand: SparkFun

This aluminium hex standoff is a compact threaded spacer for stacking and mounting small boards. It is 16.0mm long, measures 4.5mm across the flats, and is tapped through for an M2.5-0.45 screw.It is well suited to mo...

SKU: AF-6449 | Brand: Adafruit

Add reliable real-time clock and programmable power control to a Raspberry Pi with this HAT+ add-on board. Witty Pi 5 can define your Raspberry Pi’s on/off sequence, trigger power actions based on temperature or volta...

SKU: AF-6049 | Brand: Adafruit

Add digital audio input to a capable microcontroller or single-board computer with this tiny breakout for the TDK ICS43434 I2S MEMS microphone. MEMS microphones detect sound like classic electret mics, but are much sm...