SparkFun
Tall 2x20 Female GPIO Header (PTH, 0.1in)
· MPN: PRT-21570
This tall 2x20 female header is designed to extend the reach of boards using the standard 2x20 GPIO pin footprint, including Raspberry Pi, Google Coral and N...
This tall 2x20 female header is designed to extend the reach of boards using the standard 2x20 GPIO pin footprint, including Raspberry Pi, Google Coral and NVIDIA Jetson boards.
It can also be soldered onto Pi HATs that do not already have headers fitted. Check that the HAT or board is only populated on the top side, or that any components on a two-layer board will not interfere with the header height.
The through-hole design suits permanent soldered installations where you need a taller female GPIO connection for stacking or clearance.
Specifications:
- Dimensions: 51.35mm L x 18.95mm T x 4.93mm W. Black section is 8.48mm T
Jargon buster
Plain-language definitions for the technical terms used above.
- GPIO
- General-purpose input/output pins are microcontroller pins you can set in software to read signals, switch devices on and off, or connect to peripherals. The number of GPIO pins matters because it limits how many buttons, LEDs, sensors, and other parts you can wire directly to the board.
- Headers
- Rows of metal pins used to plug a module into a breadboard or connect it with jumper wires. Pre-soldered headers make the module easier to use straight away without needing to solder the pins yourself.
Find this product in
Supplier page — sparkfun.com
Supplier Description · 317.7 KB · Click any page to view full size
