All Products

SKU: SF-ROB-13301

The Shadow Chassis is a marvelously durable and modular robot platform from RobotZone. The chassis plates and mounts are cut from ABS plastic and utilize the Actobotics 0.77" and 1.50" hub patterns for sensors, controllers, power, etc. Simply snap each panel together and you’ll be able to attach ...

SKU: ED-BITLIGHT · MPN: BITLIGHT

An analogue light sensor on a Hummingbird lead: the brighter the light falling on it, the higher the signal voltage your program reads. Useful for nightlights that switch themselves on, sun-tracking models and any project where the robot should notice a shadow. It screws into a sensor port on the...

SKU: ED-035012-01 · MPN: 035012-01

Before clocks there was the sky. This kit has students build a working sundial, then use it to understand how the Sun's position tells you the time of day — a concept that lands far better when you can watch a shadow move than when you read about it. Designed for Ozobot Evo. Not compatible with O...

SKU: DF-FIT0875 · MPN: FIT0875

This compact COB LED strip is a bright white lighting module for indoor decoration, display lighting and battery-powered projects. It uses 16 LEDs under a silicone encapsulated surface to help protect the chips and support longer service life.The strip runs from DC 5V, giving you flexible power o...

SKU: DF-KIT0234 · MPN: KIT0234

Introduction The WIAnode Sensor Kit is a comprehensive hardware collection designed to bridge the physical world and digital creative environments. Operating as a sensory extension for wireless data interaction nodes, this kit enables instant, virtual-real interaction without the friction of comp...

SKU: SF-ROB-13302

These are a pair of hobby gearmotors from DAGU. These gearmotors are the same ones recommended for use in the Shadow Chassis and offer a cheap and easy-to-use setup to get your wheels turning. Each Hobby Gearmotor also possess a 9mm long output on a straight axis.These gearmotors require a voltag...

SKU: SF-SEN-13582

The SparkFun Line Follower Array is a long board consisting of eight IR sensors that have been configured to read as digital bits! We have designed the SparkFun Line Follower Arrays to follow a dark line of about ¾ inch width or smaller (spray paint or electrical tape) on a light background. Each...

SKU: DF-FIT0878

This 5V COB LED strip produces bright, uniform blue light (465nm) with no visible hotspots or shadows. It uses 16 chip-on-board LEDs encapsulated in silicone for protection and longevity, and runs on just 5V DC — making it easy to power from USB, battery packs, or microcontrollers. The strip is ...

SKU: SF-TOL-19653

The Wowstick 1F+ is a lithium-powered rechargeable electric screwdriver kit with 56 precision bits covering all the common styles used in electronics repair. The sleek aluminium driver pen features three built-in LEDs to eliminate shadows, and a dual-action button for instant clockwise/counterclo...

SKU: SF-ROB-21245

A compact hobby gearmotor from DAGU with a 48:1 gearbox ratio and 140 RPM unloaded speed. Features a 9mm output shaft on a straight axis with male connectors for easy wiring. A reliable, affordable option for small robotics and wheeled projects. Runs on 4.5VDC with a no-load current of 190mA — w...

SKU: DF-FIT0880 · MPN: FIT0880

This compact COB LED strip provides bright red illumination from a 5V DC supply, making it handy for small lighting, display and battery-powered maker projects. It uses 16 LEDs under silicone encapsulation to help protect the chips and support a longer service life.The strip is designed for unifo...

SKU: DF-FIT0879 · MPN: FIT0879

This compact green COB light bar provides bright, even illumination for decorative lighting and small embedded projects. It uses 16 densely packed COB LEDs under silicone encapsulation to create a smooth luminous surface without the dotted look common on traditional LED strips.It runs from a simp...

SKU: DF-FIT0877 · MPN: FIT0877

This compact COB light strip is a bright yellow 5V lighting module for decorative and embedded illumination projects. It uses 16 LED chips under silicone encapsulation to create a smooth, continuous luminous surface with minimal hotspots and shadowing.The low-voltage DC 5V input makes it practica...

SKU: DF-FIT0882 · MPN: FIT0882

This compact COB LED strip provides smooth purple illumination for decorative lighting, creative electronics builds and small-space accent lighting. It integrates 16 LEDs under a silicone-encapsulated surface, helping protect the LED chips while producing a more continuous output than typical dot...

SKU: DF-FIT0876 · MPN: FIT0876

This compact COB LED strip uses 16 LEDs under a silicone encapsulated surface, helping protect the chips while providing a smooth, even warm white light output.It runs from DC 5V, making it suitable for battery-operated lighting projects and other low-voltage builds. The strip is solderable and c...

SKU: SF-COM-15809

The W25Q32FV (32M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins, and power. This small SMD IC series offers flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code shadowing to RAM, executing code directly from Dua...

SKU: AF-4433 · MPN: 4433

This LED Ring Light is designed for use with microscopes but we kinda like the design and think it could be a really nice LED element for costuming or lighting effects or... something else? Of course you could also just use it is a great addition to your photo and video projects. It's super illum...

SKU: PI-PIM728 · MPN: PIM728

Add smart light and sound effects to models and dioramas with this small-but-mighty RP2040-powered programmable controller board - now with wireless connectivity!Tiny FX W is an effects controller for the LED dots and strips that can be found in third-party LEGO®-compatible lighting kits. These L...