All Products

SKU: DF-DFR0667

This Charger - MicroUSB is designed for single-cell 3.7V lithium battery. With its tiny body, you can easily integrate it into your applications. The charger adopts TP4056X lithium battery charging IC, which guarantees you quick and safe charging. Three output current modes can be easily switched...

SKU: AF-5612 · MPN: 5612

This SHIM from the Pimoroni Pirates provides a convenient way of powering your Raspberry Pi Pico from a LiPo/LiIon battery. You can recharge the battery easily by providing power to the Pico's USB port, then take your Pico or Pico W project on the go with the battery pack powering your circuitry....

SKU: SF-PRT-26993 · MPN: PRT-26993

This compact power-control board gives battery-powered projects a laptop-style on/off button while still allowing your microcontroller to take part in the shutdown process. A quick press turns the system on, another press can be handled by the MCU for an orderly shutdown, and a long press provide...

SKU: SF-TOL-27923 · MPN: TOL-27923

This handy tool helps remove a standard 2-pin JST-PH connector with 2mm pitch, such as the female connector commonly found on single-cell LiPo batteries. It gives you something safer and easier to grip than the connector body itself, helping avoid sore fingertips, pinched wires from needle nose p...

SKU: SF-DEV-20748 · MPN: DEV-20748

This single-board carrier lets you connect one MicroMod Processor Board to one MicroMod Function Board using SparkFun’s M.2-based MicroMod ecosystem. Align the keyed edge connector, fasten the boards with screws, and you can swap processors or functions to suit your project.The board provides USB...

SKU: SF-DEV-14008 · MPN: DEV-14008

This breakout board makes it easier to build a custom wireless controller for XBee-based projects, without relying on a standard hobby RC transmitter. It is designed for makers who want to choose their own control layout for robots, vehicles and other radio-controlled builds.The board includes an...

SKU: ED-6550153625646 · MPN: MK-AB-1

Air:bit 2 is a STEAM drone kit for the BBC micro:bit that students build, code and fly. It combines the approachable micro:bit platform with a hands-on drone project for learning coding, engineering and technology.Note: micro:bits are not included as standard with this kit. The supplier recommend...

SKU: AF-6398 · MPN: ADA6398

The ProS3[D] is a compact ESP32-S3 development board from Unexpected Maker, designed for capable wireless projects with USB-C, LiPo support and plenty of GPIO broken out.It gives you two antenna options on the one board: an onboard 3D high gain antenna and a u.FL connector for an external antenna...

SKU: SF-WRL-17381 · MPN: WRL-17381

Built around Espressif’s ESP32-WROOM-32UE module, this Thing Plus board gives you a compact foundation for connected projects that need WiFi, Bluetooth and a flexible antenna setup. The onboard U.FL connector lets you attach a suitable external antenna for installations where a PCB antenna is not...

SKU: SF-WRL-26060 · MPN: WRL-26060

This development board is designed to make building a LoRaWAN® IoT end node much less fiddly. It combines Digi X-ON™ onboarding with the SparkFun Qwiic ecosystem, so you can connect supported Qwiic sensors and get data moving to the cloud quickly.The board ships with firmware installed that can c...

SKU: SF-DEV-20595 · MPN: DEV-20595

This Double Main Board is a carrier for SparkFun’s MicroMod ecosystem, letting one MicroMod Processor Board connect to up to two MicroMod Function Boards. The M.2 MicroMod connectors make it straightforward to align the keyed edge connectors and secure the boards with screws.USB-C is provided for...

SKU: ED-6968286609454 · MPN: MK-AB-FM

Keep your Air:bit flying with this service kit for replacing lost or broken parts. It is a handy spares pack for classroom, workshop or home use where small drone parts can wear out or go missing.The kit contains 12 screws, nuts and spacers, plus 2 sizes with rubber rings. It also includes propel...

SKU: SF-WRL-15663 · MPN: WRL-15663

Built around Espressif's ESP32-WROOM module, this Feather-compatible development board is a handy starting point for WiFi, Bluetooth and battery-powered IoT projects. The dual-core Xtensa 32-bit LX6 processor runs at up to 240MHz, with 16MB of embedded flash and 520KB of internal SRAM on hand for...

SKU: AF-5580 · MPN: 5580

The Adafruit MAX17048 LiPoly/LiIon Fuel Gauge and Battery Monitor gives you accurate battery voltage and charge percentage readings for your 1S 3.7–4.2V lithium polymer or lithium ion battery. Instead of guessing remaining capacity from a non-linear voltage curve, this smart sensor does the maths...

SKU: AF-4236 · MPN: 4236

A 3.7 V lithium-ion polymer (LiPo) battery with 420 mAh capacity (approximately 1.55 Wh). It features a short cable with a genuine 2-pin JST-PH connector that clicks smoothly into matching JST jacks without snagging. The battery includes built-in protection circuitry that guards against overchar...

SKU: SF-PRT-12711

The SparkFun USB LiPoly Charger is a single-cell Li-Ion/Li-Polymer battery charging board based on the MCP73831T. It charges 3.7V LiPo cells at a selectable rate of 500 mA or 100 mA via a solder jumper, with power input from either USB or a barrel jack connector. The board includes a SYS OUT JST...

SKU: AF-258 · MPN: 258

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 1200mAh for a total of about 4.5 Wh. If you need a larger battery, we also have a 2500mAh+ modelThe batteri...

SKU: AF-328 · MPN: 328

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 2500mAh for a total of about 10 Wh. If you need a smaller battery, we also have a 1200mAh model The batter...

SKU: DF-DFR0208

If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The Lithium Battery Charger can charge 3.7V LiPo battery at a rate of 500mA per hour. It is designed to charge single-cell Li-Ion or Li-Polymer batteries. Check the datasheet below to see if it will wo...

SKU: AF-2750 · MPN: 2750

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 350mAh for a total of about 1.3 Wh. If you need a larger (or smaller!) battery, we have a full range of LiP...