All Products
Showing 21-40 of 56 products · 10 unavailable products hidden
Jumper Wire - 0.1, 6-pin, 6
This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers. Dimensions: 6" length Documents: Drawing
Jumper Wire - 0.1, 2-pin, 12
This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers. Dimensions: 12" length Documents: Drawing
Jumper Wire - 0.1, 4-pin, 12
A simple 4-pin jumper wire cable with JST RE connectors on both ends. Great for jumping between boards or connecting to standard 0.1" (2.54 mm) breakaway headers. Specifications Pins – 4 Pitch – 0.1" (2.54 mm) Length – 12" (30 cm) Connectors – 4-pin JST RE on both ends Package Contents 1...
Jumper Wire - 0.1, 3-pin, 12
This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.
Jumper Wire - 0.1, 5-pin, 12
This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers. Dimensions: 12" length Documents: Drawing
Jumper Wire - 0.1, 6-pin, 12
This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers. Dimensions: 12" length Documents: Drawing
SparkFun SOIC to DIP Adapter - 20-Pin
A simple breakout PCB that adapts a 20-pin SOIC package IC to standard 0.1″ DIP headers for easy breadboard prototyping. Solder your SOIC chip to the board and plug it straight into a breadboard or socket. Key Features SOIC to DIP Conversion – Use surface-mount ICs on breadboards 20-Pin Layou...
SparkFun SOIC to DIP Adapter - 28-Pin
The SparkFun SOIC to DIP Adapter converts 28-pin SOIC surface-mount packages to standard 0.1" through-hole headers, making it easy to prototype with SMD ICs on breadboards or in DIP sockets. Key Features 28-Pin SOIC Layout – Pad layout fits all standard 28-pin SOIC devices 0.6" Pin Spacing – ...
SparkFun SSOP to DIP Adapter - 8-Pin
8-Pin SSOP to DIP break out board. The footprint was rotated to accommodate different width SSOP devices and can be used with 8 pin SSOPs. Designed to be used with 0.65mm pitch devices but can also be used with 0.025" pitch devices (comes out to ~0.635mm). We’ve made these 0.635mm devices fit ...
SparkFun SSOP to DIP Adapter - 28-Pin
8, 16, 20, and 28-Pin SSOP to DIP break out boards. The footprint was rotated to accommodate different width SSOP devices and can be used with any pin count up to 28 pins. Designed to be used with 0.65mm pitch devices but can also be used with 0.025" pitch devices (comes out to ~0.635mm). We’v...
SparkFun SOT23 to DIP Adapter
6 pin SOT-23 to DIP adaptor. Created to take SOT23 of various pin sizes breakout to DIP. This will work with 3-pin MOSFETs, BJTs, Voltage Regulators (SOT-23-5), and various other Micro6, Micro5, etc packages. DIP width is 0.300" (300mil) and will fit nicely into any breadboard or DIP socket. 40...
SparkFun RJ45 Breakout
RJ45 connectors are the kind that are used for Ethernet jacks, but they make great general purpose connectors when you need a lot of conductors. This is a small PCB that brings out the pins of the RJ45 connector to an in-line 0.1" footprint. Use with break-away headers for breadboarding or create...
Elecrow Electronic Kit Bundle with Breadboard Cable Resistor, Capacitor, LED, Potentiometer
A comprehensive electronics starter kit with over 200 components for Arduino and Raspberry Pi projects. Includes a breadboard, power supply module, jumper wires, LEDs, resistors, capacitors, ICs, and more — everything needed to begin learning electronics and programming. Key Features 200+ Comp...
20-Pin Straight Female Header - PTH, 0.1in (2.54mm)
·
This single-row female header provides 20 straight receptacles on standard 0.1 inch (2.54 mm) spacing, making it useful for prototyping, repairs and custom board connections.The strip can be cut down to the length you need with a pair of wire cutters. Please note that you will probably lose one p...
36-pin 0.1 Short Break-away Male Header - Pack of 10
·
Short break-away male headers in a convenient pack of ten — ideal for low-profile connections where standard-height male headers would be too tall. These headers are designed to pair with short female headers for a slim, compact fit. Each header strip is 36 pins long with standard 0.1" (2.54mm) ...
Break-away 0.1 36-pin strip male header - Red - 10 pack
·
A 10-pack of 36-pin break-away male headers with red plastic housing. Snap or cut them to any size you need for breadboarding, perfboard soldering, and making connections between boards and modules. Standard 0.1" (2.54mm) pitch fits all common breadboards, sockets, and PCB footprints. Simply bre...
Break-away 0.1 36-pin strip male header - Blue - 10 pack
·
In this world nothing can be said to be certain, except we need headers, headers, and more headers!Each pack contains ten blue 36-pin 0.1" pitch break-away male headers. These are a little extra special in that the plastic holding the pins together is made of blue plastic instead of classic...
NVIDIA Jetbot Parts Pack
·
Everything you need (besides the Jetson Nano) to build NVIDIA's JetBot — an open-source AI robot platform. This parts pack includes the motor driver, motors, wheels, and a handy PiOLED display to get your JetBot rolling. The included DC Motor + Stepper FeatherWing provides I2C control for two br...
0.100 (2.54 mm) Breakaway Male Header: 2x40-Pin, Straight Blue
This double-row, 80-pin (2×40) straight male header strip with 0.1" (2.54mm) pitch is a versatile connector for electronics projects. The breakaway design lets you snap or cut it into any dual-row length you need. The blue colour makes it easy to colour-code sections of your project. Standard 0....
SparkFun Breadboard Power Supply Stick - 3.3V/1.8V
The SparkFun Breadboard Power Supply Stick provides clean, regulated 3.3 V or 1.8 V power directly to your breadboard. It accepts 4–9 V input via a DC barrel jack or 2-pin header, and outputs regulated voltage through pins spaced to power both rails of a standard full-size breadboard simultaneous...
